Electrocatalytic Determination of Glucose in a Ringer''s Solution by Pulse-Voltammetry

Improvement of the electrocatalytic method of glucose determination was achieved by applying the pulse voltammetry technique. This technique, compared. to previously applied cyclic voltammetry, enhances selectivity of a platinum-black working electrode for glucose measurement. A low catalytic load working electrode has been used which is less susceptible to poisoning and has longer term stability. With cyclic voltammetry previously applied, those electrodes were limited by their narrow concentration range for glucose detection. By applying a pulsing technique, these electrodes exhibit linearity up to a glucose concentration 200 mg/dl with correlation coefficients greater than 0.9. The pulse voltammetry diminishes interference by low molecular weight serum components such as serum urea. Concentrations from 20. to 40 mg/di had an interference of 4 percent compared to 40 percent with cyclic voltammetry. Further investigations are carried on to adopt pulse voltammetry for direct measurements of glucose in body fluids.     

PAN‐based fibers modified with two‐component ceramic nanoparticles

The authors determined conditions for manufacturing PAN precursor fibers containing a system of two nanoadditives, montmorillonite (MMT), and hydroxyapatite (HAp) in their structure. The PAN precursor fibers thus obtained are characterized by a tenacity of more than 30 cN/tex and a total volume of pores at the level of 0.29 cm³/g. Furthermore, it was found that the use of nanoadditives entails the remodeling of the paracrystalline structure of PAN fibers into a strictly crystalline one. This is accompanied by a decrease in spacing between MMT layers combined with their partial exfoliation. The fibers thus obtained, after being carbonized, will be used for medical applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Performance of carbon-carbon supercapacitors based on organic, aqueous and ionic liquid electrolytes

Properties of capacitors working with the same carbon electrodes (activated carbon cloth) and three types of electrolytes: aqueous, organic and ionic liquids were compared. Capacitors filled with ionic liquids worked at a potential difference of 3.5 V, their solutions in AN and PC were charged up to the potential difference of 3 V, classical organic systems to 2.5 V and aqueous to 1 V. Cyclic voltammetry, galvanostatic charging/discharging and impedance spectroscopy were used to characterize these capacitors. The highest specific energy was recorded for the device working with ionic liquids, while the highest power is characteristic for the device filled with aqueous H₂SO₄ electrolyte. Aqueous electrolytes led to energy density an order of magnitude lower in comparison to that characteristic of ionic liquids.     

Energy-efficient Rate Adaptation MAC Protocol for Ad Hoc Wireless Networks

In this paper, two novel energy-efficient rate adaptation schemes are presented. The proposed protocols use the Distributed Power Control (DPC) algorithm to predict the channel state and determine the necessary transmission power which optimizes the energy consumption. The first proposed rate adaptation scheme heuristically alters the modulation rate to balance the energy-efficiency and the required throughput which is estimated with queue fill ratio. Moreover, the back-off scheme is incorporated to mitigate congestion and reduce packet losses due to buffer overflows thus minimizing energy consumption. Consequently, the nodes will conserve energy when the traffic is low, offer higher throughput when needed and save energy during congestion by limiting transmission rates. The second rate adaptation scheme employs dynamic programming (DP) principle to analytically select modulation rate and a burst size to be used during transmission. The proposed quadratic cost-function minimizes the energy consumption while alleviating network congestions and buffer overflows. The proposed DP solution renders a Riccati equation ultimately providing an optimal rate selection. The simulation results indicate that an increase in throughput by 96% and energy-efficiency by 131% is observed when compared to other available protocols, for example Receiver Based AutoRate (RBAR).

Phase-Change Perovskite Microlaser with Tunable Polarization Vortex

Metasurfaces supporting optical bound states in the continuum (BICs) are emerging as simple and compact optical cavities to realize polarization-vortex lasers. The winding of the polarization around the singularity defines topological charges which are generally set by the cavity design and cannot be altered without changing geometrical parameters. Here, a subwavelength-thin phase-change halide perovskite BIC metasurface functioning as a tunable polarization vortex microlaser is demonstrated. Upon the perovskite structural phase transitions, both its refractive index and gain vary substantially, inducing reversible and bistable switching between distinct polarization vortexes underpinned by opposite topological charges. Dynamic tuning and switching of the resulting vector beams may find use in microscopy imaging, particle trapping and manipulation, and optical data storage.     

Time and Energy Performance of Parallel Systems with Hierarchical Memory

In this paper we analyze the impact of memory hierarchies on time-energy trade-off in parallel computations. Contemporary computing systems have deep memory hierarchies with significantly different speeds and power consumptions. This results in nonlinear phenomena in the processing time and energy usage emerging when the size of the computation is growing. In this paper the nonlinear dependence of the time and energy on the size of the solved problem is formalized and verified using measurements in practical computer systems. Then it is applied to formulate a problem of minimum time and minimum energy scheduling parallel processing of divisible loads. Divisible load theory is a scheduling and performance model of data-parallel applications. Mathematical programming is exploited to solve the scheduling problem. A trade-off between energy and schedule length is analyzed and again nonlinear relationships between these two criteria are observed. Further performance analysis reveals that energy consumption and schedule length are ruled by a complex interplay between the costs and speeds of on-core and out-of-core computations, communication delays, and activating new machines.     

Generalized adaptive notch filters with frequency debiasing for tracking of polynomial phase systems

Generalized adaptive notch filters are used for identification/tracking of quasi-periodically varying dynamic systems and can be considered an extension, to the system case, of classical adaptive notch filters. For general patterns of frequency variation the generalized adaptive notch filtering algorithms yield biased frequency estimates. We show that when system frequencies change slowly in a smooth way, the estimation bias can be substantially reduced by means of post-filtering of the frequency estimates. The modified (debiased) algorithm has better tracking capabilities than the original algorithm.     

Determination of EEG activity propagation: pair-wise versus multichannel estimate

Performance of different estimators describing propagation of electroencephalogram (EEG) activity, namely: Granger causality, directed transfer function (DTF), direct DTF (dDTF), short-time DTF (SDTF), bivariate coherence, and partial directed coherence are compared by means of simulations and on the examples of experimental signals. In particular, the differences between pair-wise and multichannel estimates are studied. The results show unequivocally that in most cases, the pair-wise estimates are incorrect and a complete set of signals involved in a given process has to be used to obtain the correct pattern of EEG flows. Different performance of multivariate estimators of propagation depending on their normalization is discussed. Advantages of multivariate autoregressive model are pointed out.     

High temperature resistivity determination of high-melting point metals and alloys

A method of determination of temperature-dependent electrical resistivity for metals and alloys of high-melting points at high temperatures is presented. It is based on the computer simulation of wire heating by direct current and basic electrical measurements. The authors present new results for 25Re75W and 47.5Re52.5Mo alloys along with the results of test measurements for tungsten. Electrical resistivity for tungsten obtained with presented method is in good agreement with well known data for the metal.