The effect of cyclic stress on the physical properties of a poly(dimethylsiloxane) elastomer

The dynamic creep behavior of a filled poly(dimethylsiloxane) elastomer was studied under cyclic stress. The stress level was chosen such that the increase in the internal temperature was small and that microcracks were not observed. This work has demonstrated that cyclic stress in combination with high temperature accelerates the degradation of the elastomer. The results suggest that because of the applied force, breaks in the load-bearing chains of the network occur. These breaks, while relieving the mechanical stress, create highly reactive ionic fragments. It is believed that because of the subsequent reactions of the ionic fragments, changes in the specific gravity, storage modulus, effective crosslink density, and length of the sample (creep) are observed. The observed decrease in the storage modulus is thought to occur because of the reaction of the ionic fragments with moisture, which results in the formation of silanol chain ends that reduce the effective crosslink density. The results also show that contrary to the prediction of the Boltzmann's Superposition Principle, the rate of creep is greatly enhanced when the sample is subjected to a sinusoidally varying dynamic load as compared to a comparable static load. The polymer weight loss was found to be linear with time and strongly dependent on the level of applied dynamic and static force. In addition, the weight loss and rate of creep were also found to be strongly dependent upon temperature.     

Comparative antagonism of kainate-activated kainate and AMPA receptors in hippocampal neurons

Native kainate receptors expressed by cultured hippocampal cells were studied in the whole-cell configuration of the patch-clamp technique by using a fast perfusion system. About 80% of the neurons expressed kainate receptors independently of the time in culture (0-4 days), which coincided with the number of cells immunoreactive for a monoclonal antibody against the GluR5/6/7 subunits. Three types of cells were considered: neurons in which the rapid application of kainate induced a rapidly desensitizing current, cells in which kainate induced a more slowly rising, non-desensitizing, response and those in which a mixture of both responses was apparent. Steady responses induced by 300 microM kainate were inhibited by 6-cyano-7-nitroquinoxaline-2,3-dione (CNQX) in a dose-dependent manner (IC50 = 0.92 microM). CNQX was less potent in blocking transient kainate-induced responses (IC50 = 6.1 microM). Responses to kainate, whether steady or transient, were also inhibited by NS102, showing poor selectivity for the transient response (IC50 = 4.1 and 2.2 microM respectively). The new alpha-amino-3-hydroxy-5-methyl-4-isoxazole (AMPA) receptor antagonist NS394 was very potent in inhibiting steady kainate-induced currents (IC50 = 0.45 microM), but was even more effective in preventing peak responses (IC50 = 0.13 microM). In contrast, cyclothiazide did not affect transient kainate-induced responses but did potentiate current induced by activation of AMPA receptors by AMPA or kainate. These results demonstrate the lack of complete selectivity amongst some available competitive antagonists for AMPA and kainate receptors, and indicate that kainate receptors expressed by hippocampal cells lack the cyclothiazide modulatory site present at AMPA receptors. In addition, the present data support the idea that low-affinity kainate binding sites in the brain correspond to receptor channels selectively activated by kainate.     

Bovine IgG2a antibodies to Haemophilus somnus and allotype expression

AIMS/BACKGROUND: To characterise clinically a large kindred segregating retinitis pigmentosa and sensorineural hearing impairment in an autosomal dominant pattern and perform genetic linkage studies in this family. Extensive linkage analysis in this family had previously excluded the majority of loci shown to be involved in the aetiologies of RP, some other forms of inherited retinal degeneration, and inherited deafness. METHODS: Members of the family were subjected to detailed ophthalmic and audiological assessment. In addition, some family members underwent skeletal muscle biopsy, electromyography, and electrocardiography. Linkage analysis using anonymous microsatellite markers was performed on DNA samples from all living members of the pedigree. RESULTS: Patients in this kindred have a retinopathy typical of retinitis pigmentosa in addition to a hearing impairment. Those members of the pedigree examined demonstrated a subclinical myopathy, as evidence by abnormal skeletal muscle histology, electromyography, and electrocardiography. LOD scores of Zmax = 3.75 (theta = 0.10), Zmax = 3.41 (theta = 0.10), and Zmax = 3.25 (theta = 0.15) respectively were obtained with the markers D9S118, D9S121, and ASS, located on chromosome 9q34-qter, suggesting that the causative gene in this family may lie on the long arm (q) of chromosome 9. CONCLUSIONS: These data indicate that the gene responsible for the phenotype in this kindred is located on chromosome 9 q. These data, together with evidence that a murine deafness gene is located in a syntenic area of the mouse genome, should direct the research community to consider this area as a candidate region for retinopathy and/or deafness genes.     

Lifetime,residual strength,and quality of wood and other viscoelastic building materials

A theoretical analysis of the influence of wood quality on dead load lifetime is made on the basis of the authors DVM concept of building materials (Damaged Viscoelastic Material). It is shown that low quality structural wood and high quality clear wood lives longer than normal clear wood when loaded to the same fraction of respective strengths. At middle range qualities lifetime is practically not influenced by quality. Also considered is residual strength of wood during its lifetime experience. The results presented are valid in principle for a number of building materials applying to the DVM concept.     

Simulation of sulfide buildup in wastewater and atmosphere of sewer networks.

A model concept for prediction of sulfide buildup in sewer networks is presented. The model concept is an extension to--and a further development of--the WATS model (Wastewater Aerobic-anaerobic Transformations in Sewers), which has been developed by Hvitved-Jacobsen and co-workers at Aalborg University. In addition to the sulfur cycle, the WATS model simulates changes in dissolved oxygen and carbon fractions of different biodegradability. The sulfur cycle was introduced via six processes: 1. sulfide production taking place in the biofilm covering the permanently wetted sewer walls; 2. biological sulfide oxidation in the permanently wetted biofilm; 3. chemical and biological sulfide oxidation in the water phase; 4. sulfide precipitation with metals present in the wastewater; 5. emission of hydrogen sulfide to the sewer atmosphere and 6. adsorption and oxidation of hydrogen sulfide on the moist sewer walls where concrete corrosion may take place.     

Enzymatic biodiesel production: Technical and economical considerations

It is well documented in the literature that enzymatic processing of oils and fats for biodiesel is technically feasible. However, with very few exceptions, enzyme technology is not currently used in commercial‐scale biodiesel production. This is mainly due to non‐optimized process design and a lack of available cost‐effective enzymes. The technology to re‐use enzymes has typically proven insufficient for the processes to be competitive. However, literature data documenting the productivity of enzymatic biodiesel together with the development of new immobilization technology indicates that enzyme catalysts can become cost effective compared to chemical processing. This work reviews the enzymatic processing of oils and fats into biodiesel with focus on process design and economy.     

Antithrombotic effect of recombinant truncated tissue factor pathway inhibitor (TFPI1-161) in experimental venous thrombosis--a comparison with low molecular weight heparin

The aim was to investigate whether a truncated recombinant Tissue Factor Pathway Inhibitor (TFPI1-161), which lacked the third Kunitz-type domain and the basic c-terminal region, had an antithrombotic effect comparable to LMWH in a randomised double-dummy study. The experimental thrombosis was induced in jugular veins, in a total of 40 rabbits by a combination of destruction of the endothelium and restricted blood flow. Group 1: placebo, gr 2: LMWH 60 anti-FXa IU/kg, gr 3-5: 0.1, 1.0 and 10.0 mg/kg TFPI1-161. TFPI1-161 reduced the thrombus weights in all treated groups, significantly in doses of 1.0 and 10.0 mg/kg compared to placebo. The frequency of thrombosis and occlusive thrombosis were also significantly reduced in those doses. The antithrombotic properties of TFPI1-161 (1.0-10.0 mg/kg) measured as thrombus weight, frequency of thrombosis and frequency of occlusive thrombosis was equivalent to the anti-thrombotic properties of LMWH. In the anti-FXa, APTT and PT-assays TFPI1-161 displayed a dose dependent increase of activity. Recombinant-TFPI1-161 did not influence the anti-FIIa-assay. No haemorrhagic side effects were noted.     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.