Strategies to obtain pattern fidelity in nanowire growth from large-area surfaces patterned using nanoimprint lithography

Position controlled nanowire growth is important for nanowire-based optoelectronic components which rely on light emission or light absorption. For solar energy harvesting applications, dense arrays of nanowires are needed; however, a major obstacle to obtaining dense nanowire arrays is seed particle displacement and coalescing during the annealing stage prior to nanowire growth. Here, we explore three different strategies to improve pattern preservation of large-area catalyst particle arrays defined by nanoimprint lithography for nanowire growth. First, we see that heat treating the growth substrate prior to nanoimprint lithography improves pattern preservation. Second, we explore the possibility of improving pattern preservation by fixing the seed particles in place prior to annealing by modifying the growth procedure. And third, we show that a SiN _x growth mask can fully prevent seed particle displacement. We show how these strategies allow us to greatly improve the pattern fidelity of grown InP nanowire arrays with dimensions suitable for solar cell applications, ultimately achieving 100% pattern preservation over the sampled area. The generic nature of these strategies is supported through the synthesis of GaAs and GaP nanowires.

Open image in new window

     

Trajectory planning in the infinity norm for linear control systems

When planning trajectories, a reasonable demand on the generated curves is that they interpolate through given points, or given intervals, at given specified times, or that they go through these points or intervals at times lying in specified time windows. This problem is addressed here as an optimal control problem, minimizing the infinity norm of the inputs of a discretized linear control system since the infinity norm minimization problem arises naturally when doing trajectory planning for both controlled switching systems and non-holonomic robotic systems.     

Microstructure and Mechanical Properties of a Dissimilar Friction Stir Weld between Austenitic Stainless Steel and Low Carbon Steel

Dissimilar fusion welding of austenitic stainless steels to carbon steels has some metallurgical and technical problems.It was suggested that the solid-state nature of friction stir welding(FSW) can overcome these problems and produce a sound weld with reliable mechanical properties.In this study,plates of 304 stainless steel and st37 steel were welded together by FSW at tool rotational speed of 600 r/min and welding speed of 50 mm/min.In the stir zone(SZ) of 304 stainless steel,the results showed a refined grain structure with some features of metadynamic recrystallization.In the SZ of st37 steel,the hot deformation of material in the austenite region produced small austenite grains.These grains transformed to fine ferrite and pearlite by cooling the material after FSW.The production of fine grains increased the hardness and tensile strength in the SZ of both sides with respect to their base metals(BMs).     

Adsorption of antifouling booster biocides on metal oxide nanoparticles: Effect of different metal oxides and solvents

Controlling the release rate of biocides (antifouling agents) from a paint coating is a key issue for the development of multi-season antifouling marine coatings. One promising approach is the use of nanoparticles onto which biocides are adsorbed to prevent premature depletion of the biocide. Adsorption of one novel (Medetomidine) and six commercially available and widely used antifouling biocides (Chlorothalonile, Dichlofluanid, Diuron, Irgarol, Seanine, Tolylfluanid) onto oxide nanoparticles (Al₂O₃, CuO, MgO, SiO₂, TiO₂, ZnO) was investigated by HPLC and NMR in different organic solvents. Large differences in adsorption strength depending on the type of nanoparticle and solvent employed were observed. It was shown that nanoparticles coordinate preferentially with the imidazole moiety of Medetomidine. Independent of the type of particle this interaction was considerably stronger in comparison to the other biocides. However, the interaction strength was strongly dependant on the type of solvent, where the largest strongest interaction was achieved in o-xylene. In addition field tests were performed where a considerable decrease in release rate was displayed from coatings containing Medetomidine adsorbed to nanoparticles compared to coatings containing Medetomidine as single additive.     

Anodized aluminum wire as a solid-phase microextraction fiber

The efficiency of anodized aluminum wire was investigated as a new fiber for solid-phase microextraction (SPME). Aluminum wires were anodized by direct current in a solution of sulfuric acid at room temperature and were conditioned at 300 degrees C for 30 min. These fibers were used for the extraction of some aliphatic alcohols, BTEX, and petroleum products from gaseous samples. The extracted analytes were transferred to a GC injector using an (inhouse-designed) SPME syringe that also allowed for an easy change of SPME fibers. The results obtained prove the ability of anodized aluminum wire as a new fiber for sampling of organic compounds from gaseous samples. This behavior is due most probably to the porous layer of aluminum oxide, which is formed on the metal surfaces. In this work, the optimum conditions for the preparation and conditioning of fibers and the extraction of analytes from gaseous samples were obtained. In the optimum conditions, one fiber was used in several equal analyses and the relative standard deviations were below 5% (n = 5). However, fiber-to-fiber reproducibility was 8% (n = 5). This fiber is firm, inexpensive, and durable and can be prepared simply.     

Bicycle messengers: energy expenditure and exposure to air pollution

The purpose of the study was to determine the level of energy expenditure and exposure to air pollution for bicycle messengers. Relationships between heart rate (HR) and oxygen uptake, and between HR and pulmonary ventilation (VE) for each participant were established in laboratory tests. Air pollution and HR were measured during one working day. The total oxygen uptake was then described as the total energy expenditure in Joule (J) and in multiples of the energy expenditure at rest (MET). The mean energy expenditure during a working day (8 h) was 12 MJ, (4.8 MET). The level of air pollution exposure when cycling seemed to be comparable with the levels of exposure when sitting inside a vehicle. The VE during cycling was four times higher than resting value. Increased VE led to increased exposure to air pollution.     

Ilmenite with addition of NiO as oxygen carrier for chemical-looping combustion

The naturally occurring mineral ilmenite, FeTiO₃, has been examined as oxygen carrier for chemical-looping combustion. NiO-based particles have been used as an additive, in order to examine if it is possible to utilize the catalytic properties of metallic Ni to facilitate decomposition of hydrocarbons into more reactive combustion intermediates such as CO and H₂. Firstly, ilmenite was examined by oxidation and reduction experiments in a batch fluidized-bed reactor. These experiments indicated moderate reactivity between ilmenite and CH₄, which was used as reducing gas. However, adding 5 wt.% of NiO-based particles to the ilmenite improved the conversion of CH₄ greatly, resulting in an increase in combustion efficiency with a factor of 3. Secondly, 83 h of chemical-looping combustion experiments were conducted in a small circulating fluidized-bed reactor, using ilmenite as oxygen carrier and natural gas as fuel. A wide range of process parameters and different levels of NiO addition were examined. Occasionally, there were problems with the circulation of solids between the air reactor and fuel reactor, but most of the time the experiments worked well. The products were mostly CO₂, H₂O and unconverted CH₄. Adding small amounts of NiO-based particles to the reactor increased the conversion of the fuel considerably. For the base case conducted at 900°, the combustion efficiency was 76% for pure ilmenite and 90% for the corresponding experiments with 1 wt.% NiO-based particles added to the reactor. The properties of ilmenite were found to change considerably during operation. Used particles had lower density, were more reactive and more porous than fresh particles. These changes appear to have been physical, and no unexpected chemical phases could be identified.