Coating of a lignocellulosic aggregate with pectin/polyethylenimin mixtures: Effects on flax shive and cement-shive composite properties

Lignocellulosic lightweight concretes are a potential contributor to sustainable development. However, lignocellulosic aggregates are not always fully compatible with cement matrices leading to setting delays, significant dimensional variations and low mechanical strengths. An aggregate treatment, reducing water absorption and water-soluble molecule release, can avoid or reduce these drawbacks. In this study a coating treatment, using a pectin/polyethylenimin (PP) mixture, was applied to flax shives, which is a lignocellulosic by-product. Before shive coating, a dilution with distilled water or a micro-wave heating were conducted to decrease PP mixture viscosity.The PP treatment involved a decrease in shive water absorption. Compared to standard shive concrete, treated shive concrete exhibited a decrease in setting delay with an increase in cement hydration enthalpy, an increase in mechanical strengths and a significant reduction in dimensional variations. Although a slight increase in thermal conductivity and bulk density was measured, the cement-shive composite obtained still belongs to the insulating concrete category.     

Transmission pricing and recovery of investment costs in the deregulated power system based on optimal circuit prices

Transmission pricing has become a major issue in the discussions about the deregulated electricity markets.Conse-quently,open access to the transmission system is one of the basic topics to allow compe...     

Charge transport mechanism of graphite‐nanosheet‐loaded rubber nanocomposites

Nitrile butadiene rubber loaded with different concentrations of thin graphite nanosheets have been successfully prepared by using a two‐roll mill. The percolation concentration of the nanocomposites was 0.5 phr. The I–V characteristic curves showed that the nanocomposites exhibited ohmic behaviour at a certain voltage and then non‐linear behaviour. The Richardson–Schottky and Poole–Frenkel models were used to investigate the reason for the space charge. The experimental data fit the Schottky model well. The conductivity as a function of temperature was also studied and the data were fitted by using the Mott relation. The Mott relation showed that as the concentration of graphite nanosheets in the rubber composite increases, the hopping distance between the graphite nanosheet layers decreases, which enhances the conductivity of the nanocomposite at low concentrations. Copyright © 2011 Society of Chemical Industry     

Process synthesis and optimization of biorefinery configurations

Recently, there has been a growing interest in the development of cost‐effective technologies for the production of biofuels. A common approach to biofuel research is to invent or improve a biochemical or thermochemical conversion step. Subsequently, other conversion and separation steps are added to form a complete biorefinery flowsheet. Because this approach is structured around a specific conversion step, it may limit the possibilities of configuring optimal and innovative biorefineries. This article proposes a novel and systematic two‐stage approach to the synthesis and optimization of biorefinery configurations, given available feedstocks and desired products. In the synthesis stage, a systems‐based approach is developed to create a methodical way for synthesizing integrated biorefineries. This method is referred to as “forward‐backward” approach. It involves forward synthesis of biomass to possible intermediates and reverse synthesis starting with the desired products and identifying necessary species and pathways leading to them. In the optimization stage, Bellman's principle of optimality is applied to decompose the optimization problem into subproblems in which an optimal policy of available technologies is determined for every conversion step. An optimization formulation is utilized to determine the optimal configuration based on screening and connecting the optimal policies and generating the biorefinery flowsheet. A case study of alcohol‐producing pathways from lignocellulosic biomass is solved to demonstrate the merits of the proposed approach. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

TQM consultant selection in SMEs with TOPSIS under fuzzy environment

Although much has been written about TQM in SMEs, little attention has been paid to the role of external consultant in the successful implementation of a TQM program in this kind of firms. Sometimes there are some candidates and companies have to select the best one. In general, many factors affect this problem which adheres to uncertain and imprecise data, and usually several people from different functional areas of the company are involved in this process. This study aims to improve the quality of decision in this area. In this paper a systematic decision process for selecting external consultant is proposed. The proposed method is based on TOPSIS method in fuzzy environment. Decision criteria are obtained from the nominal group technique (NGT). Additionally, a real case study is presented to illustrate the application of the proposed method.     

Copper corrosion in sodium dodecyl sulphate solutions and carbon nanotube nanofluids: A modified Koutecky–Levich equation to model the agitation effect

Copper corrosion in sodium dodecyl sulphate (SDS) solutions and carbon nanotube (CNT) nanofluids were studied by potentiodynamic polarization. For the corrosion current densities calculations, Koutecky–Levich equation was modified to model the combined charge and mass transport. 0.005 M SDS reduced the copper corrosion current density by 81%. Higher SDS concentrations enhanced corrosion. Stirring SDS solutions increased the corrosion current density by ∼75%. By adding CNT to SDS solution, the corrosion current density first decreased and then remained constant. Stirring CNT nanofluids didn’t change the corrosion current density. An adsorbed CNT layer on copper controlled the corrosion process in CNT nanofluids.     

A Multi-objective Optimization for Sizing and Placement of Voltage-controlled Distributed Generation Using Supervised Big Bang–Big Crunch Method

Abstract—This article presents an efficient multi-objective optimization approach based on the supervised big bang–big crunch method for optimal planning of dispatchable distributed generator. The proposed approach aims to enhance the system performance indices by optimal sizing and placement of distributed generators connected to balanced/unbalanced distribution networks. The distributed generation units in the proposed algorithms are modeled as a voltage-controlled node with the flexibility to be converted to a constant power node in the case of reactive power limit violation. The proposed algorithm is implemented in the MATLAB (The MathWorks, Natick, Massachusetts, USA) environment, and the simulation studies are performed on IEEE 69-bus and IEEE 123-node distribution test systems. Validation of the proposed method is done by comparing the results with published results obtained from other competing methods, and the consequent discussions prove the effectiveness of the proposed approach.     

Water filtration properties of novel composite membranes combining solution electrospinning and needleless melt electrospinning methods

New composite polyvinyl alcohol (PVA)/polypropylene (PP) membranes were prepared by combining both solution electrospinning and melt electrospinning methods. Self‐designed and made needleless melt electrospinning device was used to fabricate PP membranes which acted as the support layer. PVA membrane on the surface was fabricated via solution electrospinning. The electrospun PVA/PP composite membranes were characterized by the pore size distribution, pure water flux, and rejection ratio, then compared with general composite membranes. Characterizations revealed that the fiber diameter of solution electrospun PVA membrane and melt electrospun PP membrane were 0.171 ± 0.027 and 2.24 ± 0.33 μm, respectively, and the average pore size was 0.832 μm and 27.29 μm, which was much smaller than the nonwoven membrane. The rejection ratio to the 500 nm particles of the PVA/PP composite membrane could reach more than 96%, which was much larger than that of the PVA/non‐woven substrate of 90%, and the melt electrospun PP membrane of 80%, and still maintained high permeate flux of 32,346 L/m²h under the pressure of 0.24 bar. This approach of compositing the solution electrospun membranes and melt electrospun membranes could be useful in designing novel microfiltration membrane owning both higher flux and higher rejection ratio. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41601.