Study of hot air generator with quasi-uniform temperature using concentrated solar radiation: Influence of the shape parameters

The non-uniformity of the air temperatures and the slow flow rate at the plane collector exit constitute the main cause of the limitations of the solar drying systems. In order to obtain an uniform and a variable flow rate for different uses, a hot air generator using concentrated solar radiation is proposed. To improve the thermal efficiency of the generator, a study of the influence of different shape parameters is realized. The generator is simulated in the laboratory while investigating the flow induced by a circular disc heated uniformly by Joule effect at constant temperature. This disc is placed at the entrance of an open ended vertical cylinder of a larger diameter. Thermal radiation emitted by the hot disc heats the cylinder wall. The heating of the fluid at the cylinder-inlet generates a thermosiphon flow around the one created by the hot disc. The comparison of the velocity and the temperature profiles of the resulting flow permits to determine the influence of the cylinder height, the vertical source-cylinder spacing and the radius ratio, on the resulting flow at the system exit. Thus, a judicious choice of the shape parameters entails an improvement of the flow rate as well as the thermal flux absorbed by the air and a good homogenization of the air temperature at the generator exit.     

Perceptual primitives from an extended 4D Hough transform

Directional features extracted from Gabor wavelets responses were used to train a structure of self-organising maps, thus classifying each pixel in the image within a neuron-map. Resulting directional primitives were grouped into perceptual primitives introducing an extended 4D Hough transform to group pixels with similar directional features. These can then be used as perceptual primitives to detect salient structures. The proposed method has independently fixed parameters that do not need to be tuned for different kind or quality of images. We present results in application to noisy FLIR images and show that line primitives for complex structures, such as bridges, or simple structures, such as runways, can be found by this approach. We compare and demonstrate the quality of our results with those obtained through a parameter-dependent traditional Canny edge detector and Hough line finding process.     

Environmental damage costs in Iran by the energy sector

On the basis of the energy supply and demand, this paper assesses the environmental damage from air pollution in Iran using the Extern-E study that has extended over 10 years and is still in progress in the European Union (EU) commission. Damage costs were transferred from Western European practice to the conditions of Iran by scaling according to GDP per capital measured in PPP terms.     

Converting Daily Rainfall Data to Sub-daily—Introducing the MIMD Method

One of the most important analysis in many hydrological and agricultural studies is to convert the daily rainfall data into sub-daily (hourly) because in many rainfall stations, only the daily rainfall data are available and for a comprehensive rainfall analysis, these data should be converted to sub-daily. Many experimental and analytical methods are available for this conversion but one of the simplest yet accurate ones has been proposed by the Indian Meteorological Department (IMD). Since the IMD method has shown low accuracy in some regions, in this study, the IMD method is modified to a single parameter equation, called Modified Indian Meteorological Department (MIMD) in order to improve the accuracy of the conversion. For this reason, the parameter is calibrated so that the maximum correlation between observed and estimated values is achieved. Five stations in different regions with different climatic conditions were selected so that the daily and sub-daily rainfall data were available in each of them. Then, the parameter of the MIMD method was derived for each station. The results were compared with both observed data and IMD method and it was shown that the mean correlation coefficient of MIMD and IMD methods were 0.9 and 0.73 respectively for 12-h rainfall depth which indicated that the accuracy of the MIMD method in estimation of sub-daily rainfall depths was significantly increased. Moreover, the results showed that the accuracy of the MIMD method decreases as rainfall duration decreases.

     

Ignite-GPU: a GPU-enabled in-memory computing architecture on clusters

The Journal of Supercomputing - During recent years, big data explosion and the increase in main memory capacity, on the one hand, and the need for faster data processing, on the other hand, have...     

Efficient designs of reversible sequential circuits

The Journal of Supercomputing - Recently, the synthesis of reversible sequential circuits has attracted researchers’ attention for implementing low-power logic designs. So far, the direct and...     

Extremal optimization vs. learning automata: Strategies for spin selection in portfolio selection problems

Nowadays, various imitations of natural processes are used to solve challenging optimization problems faster and more accurately. Spin glass based optimization, specifically, has shown strong local search capability and parallel processing. But, spin glasses have a low rate of convergence since they use Monte Carlo simulation techniques such as simulated annealing (SA). Here, we propose two algorithms that combine the long range effect in spin glasses with extremal optimization (EO-SA) and learning automata (LA-SA). Instead of arbitrarily flipping spins at each step, these two strategies aim to choose the next spin and selectively exploiting the optimization landscape. As shown in this paper, this selection strategy can lead to faster rate of convergence and improved performance. The resulting two algorithms are then used to solve portfolio selection problem that is a non-polynomial (NP) complete problem. Comparison of test results indicates that the two algorithms, while being very different in strategy, provide similar performance and reach comparable probability distributions for spin selection. Furthermore, experiments show there is no difference in speed of LA-SA or EO-SA for glasses with fewer spins, but EO-SA responds much better than LA-SA for large glasses. This is confirmed by tests results of five of the world's major stock markets. In the last, the convergence speed is compared to other heuristic methods such as Neural Network (NN), Tabu Search (TS), and Genetic Algorithm (GA) to approve the truthfulness of proposed methods.     

On problem transformability in VLSI

The two basic performance parameters that capture the complexity of any VLSI chip are the area of the chip,A, and the computation time,T. A systematic approach for establishing lower bounds onA is presented. This approach relatesA to the bisection flow, . A theory of problem transformation based on , which captures bothAT ² andA complexity, is developed. A fundamental problem, namely, element uniqueness, is chosen as a computational prototype. It is shown under general input/output protocol assumptions that any chip that decides ifn elements (each with (1+)lognbits) are unique must have =(nlogn), and thus, AT²=(n ²log² n), andA= (nlogn). A theory of VLSI transformability reveals the inherentAT ² andA complexity of a large class of related problems.This work was supported in part by the Semiconductor Research Corporation under contract RSCH 84-06-049-6.     

Improving the Pressurized Flushing Efficiency in Reservoirs: an Experimental Study

Sediment flushing in many reservoirs of the world is accomplished with low efficiency. In this study, a new configuration was proposed for reservoir bottom outlet to increase the pressurized flushing efficiency. In the new configuration, a projecting semi-circular structure was connected to the upstream edge of bottom outlet. It was observed that by employing the projecting bottom outlet, the sediment removal efficiency increased significantly compared to the flushing via typical bottom outlet. In the case of new-configuration bottom outlet with L _sc /D _outlet  = 5.26 and D _sc /D _outlet  = 1.32, the dimensionless length, width and depth of flushing cone increased 280%, 45% and 14%, respectively, compared to the reference test. The proposed structure can ensure the sustainable use of reservoirs.