Surface Structure,Spectroscopic and Photocatalytic Activity Study of Polyaniline/TiO2 Nanocomposites

PANI （polyaniline） as a promising conducting polymer and photosensitizer has been used to prepare PANI/TiO2 （polyaniline/TiO2） nanocomposite as photocatalyst. TiO2 nanoparticles with size of 5-100 nm were encapsulated by PANI via the ＂in situ＂ polymerization of aniline on the surface of TiO2 nanoparticles. IR, SEM, EPR techniques were used to characterize the mechanism of electron interaction in PANI/TiO2 nanocomposite. The resulting PANI-modified TiO2 composites exhibit significantly higher photocatalytic activity than that of neat PANI on degradation of MB （methylen blue） aqueous solution under UV irradiation.     

Deposition of BaTiO3 Films from EthanoI-PVB Medium

EPD （electrophoretic deposition） of barium titanate from organic medium ethanol-PVB （polyvinyl butyral） was performed on Ni, Ti, steel substrate. Stable BaTiO3 suspensions with concentration of 2 wt.% have been prepared for the deposition. A uniform and dense layer was obtained for films deposited from ethanol with PVB of 0.1%. The surface topology of deposited films can be controlled via the applied voltage. This method allows to obtain crack-free and smooth layers BaTiO3 from organic medium with thickness of 4-20 μm.     

Mannosylated Systems for Targeted Delivery of Antibacterial Drugs to Activated Macrophages

Macrophages are a promising target for drug delivery to influence macrophage-associated processes in the body, namely due to the presence of resistant microorganisms in macrophages. In this work, a series of mannosylated carriers based on mannan, polyethylenimine (PEI) and cyclodextrin (CD) was synthesized. The molecular architecture was studied using FTIR and ¹H NMR spectroscopy. The particle size, from small 10–50 nm to large 500 nm, depending on the type of carrier, is potentially applicable for the creation of various medicinal forms: intravenous, oral and inhalation. Non-specific capture by cells with a simultaneous increase in selectivity to CD206+ macrophages was achieved. ConA was used as a model mannose receptor, binding galactosylated (CD206 non-specific) carriers with constants of the order of 10⁴ M⁻¹ and mannosylated conjugates of 10⁶–10⁷ M⁻¹. The results of such primary “ConA-screening” of ligands are in a good agreement in terms of the comparative effectiveness of the interaction of ligands with the CD206+ macrophages: non-specific (up to 10%) absorption of highly charged and small particles; weakly specific uptake of galactosylated polymers (up to 50%); and high affine capture (more than 70–80%) of the ligands with grafted trimannoside was demonstrated using the cytometry method. Double and multi-complexes of antibacterials (moxifloxacin with its adjuvants from the class of terpenoids) were proposed as enhanced forms against resistant pathogens. In vivo pharmacokinetic experiments have shown that polymeric carriers significantly improve the efficiency of the antibiotic: the half-life of moxifloxacin is increased by 2–3 times in conjugate-loaded forms, bio-distribution to the lungs in the first hours after administration of the drug is noticeably greater, and, after 4 h of observation, free moxifloxacin was practically removed from the lungs of rats. Although, in polymer systems, its content is significant—1.2 µg/g. Moreover, the importance of the covalent crosslinking carrier with mannose label was demonstrated. Thus, this paper describes experimental, scientifically based methods of targeted drug delivery to macrophages to create enhanced medicinal forms.     

Oligomerization of Human Cystatin C—An Amyloidogenic Protein: An Analysis of Small Oligomeric Subspecies

Human cystatin C (HCC), an amyloidogenic protein, forms dimers and higher oligomers (trimers, tetramers and donut like large oligomers) via a domain-swapping mechanism. The aim of this study was the characterization of the HCC oligomeric states observed within the pH range from 2.2 to 10.0 and also in conditions promoting oligomerization. The HCC oligomeric forms obtained in different conditions were characterized using size exclusion chromatography, dynamic light scattering and small-angle X-ray scattering. The marked ability of HCC to form tetramers at low pH (2.3 or 3.0) and dimers at pH 4.0–5.0 was observed. HCC remains monomeric at pH levels above 6.0. Based on the SAXS data, the structure of the HCC tetramer was proposed. Changes in the environment (from acid to neutral) induced a breakdown of the HCC tetramers to dimers. The tetrameric forms of human cystatin C are formed by the association of the dimers without a domain-swapping mechanism. These observations were confirmed by their dissociation to dimers at pH 7.4.     

Cermets surface transformation under erosive and abrasive wear

The subsurface developed in ceramic-metal composites WC-Co, TiC-NiMo and Cr₃C₂-Ni during tribological testing (abrasion, sliding, erosion) under different conditions (impact angle, velocity, pressure, temperature) is the primary concern of the study. Mechanisms responsible for mechanically mixed layer (MML) development and wear resistance of materials are discussed in details. Instrumented indentation combined with consecutive polishing-testing procedure was used for mechanical characterisation. Microstructural features of the worn surface and subsurface region were studied with the help of optical microscope and scanning electron microscope equipped with energy dispersive spectroscopy analyser to evaluate difference between properties of the bulk and modified subsurface layers of materials.Formation of subsurface layer is found to be an essential feature of materials response to applied loading. Modified layer consists of highly deformed binder metal; cracked and decohesed large grains of carbides; embedded and/or fused debris of erosive/abrasive particles; and products of oxidation.     

Oxidation-abrasion of TiC-based cermets in SiC medium

The aim of the current study was to investigate the effect of oxidation on abrasive wear behaviour of TiC based cermets at temperatures ranging from 20 to 900 °C. Three types of material performance maps were constructed: oxidation rate maps, wear rate maps and maps showing the effect of oxidation on abrasion. Discussion on the performance of different cermet grades is supported by the SEM images combined with EDS and XRD analysis. The results should facilitate the selection of TiC-based cermets providing optimum composition of cermets for high temperature applications.     

Investigations of geometrical structure and morphology of samples made of hard machinable materials after wire electrical discharge machining and vibro‐abrasive finishing

In this article the results concerned influence of processing conditions of the wire electrical discharge machining and vibro‐abrasive machining on the surface layer and morphology of samples made of hard machinable materials used in aircraft industry like: Titanium 5553 β, Inconel 617, Hastelloy X and Magnesium AZ31 have been presented. For this purpose the cubic and cylindrical samples made of hard machinable alloys have been prepared using optimal electric parameters of wire‐cut electrical discharge machining and finally they have been polished using circular vibratory finishing technology and different ceramic shaped stones.