Development of a hybrid ECT sensor for JSFR SG double-wall tubes

A new design has been adopted for the steam generator (SG) tubes of the Japan Sodium-cooled Fast Reactor (JSFR) using double-wall tubes. This paper estimates and assesses the effectiveness of detecting defects in SG double-wall tubes of the JSFR by using combined high-frequency eddy current testing (ECT) and low-frequency remote field eddy current sensors. We confirm that the proposed hybrid ECT sensor is highly sensitive to small defects, fatigue cracks, and other defects even when located under support plates of tubes. The parameters of the hybrid ECT sensor are designed and optimized to detect small defects using accurate numerical simulations based on the finite element method, using an in-house developed code. The sensitivity and high performance of the hybrid ECT sensor was validated with experimental measurements.     

A control law for vehicle merging inspired by dragonfly behavior

Autonomous control of vehicles has recently attracted considerable attention. In this sense, vehicle merging has become an important topic in this field of research. However, in conventional studies, the controlled vehicle must calculate the movement of other surrounding vehicles to complete the merge, requiring high computational costs. In this paper, we focus on dragonfly behavior to solve this issue. Indeed, insects can behave adaptively in the complex real world in spite of the limited size of their brains. They reduce the computational requirements of their brain by relying on different properties of their surroundings, basing their intelligent behaviors on simple strategies. The behavior of a dragonfly when chasing a prey is an example of these strategies. In this study, we address the vehicle merging maneuver by applying dragonfly’s strategies to control the movement of the merging vehicle. We propose a simple control method inspired by the aforementioned strategies and, finally, we present simulation results that were conducted to demonstrate the effectiveness of this method.     

Effect of α-substituents on molecular motion and wetting behaviors of poly(fluoroalkyl acrylate) thin films with short fluoroalkyl side chains

The effect of α-substituent on the molecular motion and wetting behavior of poly{2-(perfluorobutyl)ethyl acrylate} [PFA-C₄], poly{2-(perfluorobutyl)ethyl methacrylate} [PFMA-C₄], poly{2-(perfluorobutyl)ethyl α-fluoroacrylate} [PFFA-C₄], and poly{2-(perfluorobutyl)ethyl α-chloroacrylate} [PFClA-C₄] films were characterized by dynamic contact angle measurement, lateral force microscopy (LFM), wide angle X-ray diffraction (WAXD), and X-ray photoelectron spectroscopy (XPS). WAXD of oriented PFClA-C₄ fiber suggested the presence of rod-like chain due to the presence of bulky α-substituent. The glass transition temperature (T_g) of PFFA-C₄ and PFClA-C₄ were well above the room temperature. The water repellencies of PFFA-C₄ and PFClA-C₄ were as high as that of PFMA-C₄ and their oil repellency of PFFA-C₄ and PFClA-C₄ was higher than the PFMA-C_4. This result was originated from the low main chain mobility of PFFA-C₄ and PFClA-C₄ due to the presence of bulky α-substituents. The effect of molecular motion on water repellency was clarified by the results of temperature dependence studies of dynamic contact angle, LFM, and surface chemical composition measured by XPS.     

Analytical and Experimental Evaluation of Dispersive Mixing Performance of Special Rotor Segments in a Corotating Twin-Screw Extruder

An intermeshing corotating twin-screw extruder is often used for producing polymer composites. In this study, we discussed mixing performance of special rotor segments in molten zone. These rotor segments have several tip clearances for achievement of self-cleaning and effective mixing, and these are named various clearance mixing technology. We studied about dispersive mixing performance of configuration, which consists of various clearance mixing technologys (various clearance mixing technology configuration) using numerical analyses and experiments. For the analytical evaluation of mixing performance, we have adopted a particle tracking method. As evaluation indices of dispersive mixing performance, we focused on following three values (1) maximum value in a history of first principal stress of each particle, (2) time-integrated shear rate of each particle, and (3) time-integrated first principal stress of each particle. And we made the probability distributions of the indices. We adopted weighted probability as approximation of volume probability in each region. The results were compared with those of kneading disk segments configuration (kneading disk configuration). Furthermore, we validated the accuracy of the analytical evaluation by performing experiments under same conditions as those of numerical analyses. For the experimental evaluation of mixing performance, we used twin-screw extruder. Polypropylene was selected as suspending media. And CaCO₃ was selected as filler. To compare just the mixing performance of various clearance mixing technology configuration with that of kneading disk configuration, side feeding and screw configuration which had third mixing segments zone were adopted. From the experimental result, it is found that various clearance mixing technology configuration dispersed better than kneading disk configuration. And from the comparison between the experimental evaluation and the analytical evaluation, it is found that the first principal stress is more appropriate for evaluation index of dispersive mixing. Finally, it can be mentioned that various clearance mixing technology configuration has better mixing performance than kneading disk configuration, and large stress is important for dispersive mixing.     

New Approach for Macro Porous RB‐SiC Derived from SiC/Novolac‐type Phenolic Composite

A novel fabrication route to make macroporous silicon carbide (SiC) has been proposed in this study. The route is composed of the following two steps: the fabrication of porous α‐SiC/novolac‐type phenolic composite using hexamethylenetetramine (HMT) as a curing/blowing agent for the novolac monomer and a conventional reaction‐bonded (RB) sintering of the composite. The α‐SiC/novolac‐type phenolic composite was carbonized at 800°C for 2 h in N₂ gas and then reacted with the molten silicon at 1450°C for 30 min under vacuum, resulting in the macroporous RB‐SiC with an open porosity of 48% and relatively large pore size of ~110 μm. The compressive strength of the macroporous RB‐SiC was 113 MPa, which is relatively high compared to those reported for macroporous SiC of equivalent porosities and pore sizes.     

MicroRNA-331-3p Suppresses Cervical Cancer Cell Proliferation and E6/E7 Expression by Targeting NRP2

Aberrant expression of microRNAs (miRNAs) is involved in the development and progression of various types of cancers. In this study, we investigated the role of miR-331-3p in cell proliferation and the expression of keratinocyte differentiation markers of uterine cervical cancer cells. Moreover, we evaluated whether neuropilin 2 (NRP2) are putative target molecules that regulate the human papillomavirus (HPV) related oncoproteins E6 and E7. Cell proliferation in the human cervical cancer cell lines SKG-II, HCS-2, and HeLa was assessed using the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium, inner salt (MTS) assay. Cellular apoptosis was measured using the TdT-mediated dUTP nick end labeling (TUNEL) and Annexin V assays. Quantitative RT-PCR was used to measure the messenger RNA (mRNA) expression of the NRP2, E6, E7, p63, and involucrin (IVL) genes. A functional assay for cell growth was performed using cell cycle analyses. Overexpression of miR-331-3p inhibited cell proliferation, and induced G2/M phase arrest and apoptosis in SKG-II, HCS-2 and HeLa cells. The luciferase reporter assay of the NRP2 3′-untranslated region revealed the direct regulation of NRP2 by miR-331-3p. Gene expression analyses using quantitative RT-PCR in SKG-II, HCS-2, and HeLa cells overexpressing miR-331-3p or suppressing NRP2 revealed down-regulation of E6, E7, and p63 mRNA and up-regulation of IVL mRNA. Moreover, miR-331-3p overexpression was suppressed NRP2 expression in protein level. We showed that miR-331-3p and NRP2 were key effectors of cell proliferation by regulating the cell cycle, apoptosis. NRP-2 also regulates the expression of E6/E7 and keratinocyte differentiation markers. Our findings suggest that miR-331-3p has an important role in regulating cervical cancer cell proliferation, and that miR-331-3p may contribute to keratinocyte differentiation through NRP2 suppression. miR-331-3p and NRP2 may contribute to anti-cancer effects.     

Homogeneous Strain Introduction Using Reciprocation Technique in High-Pressure Sliding

Metallurgical and Materials Transactions A - This study examines strain distribution occurring in the high-pressure sliding (HPS) processing for rods of pure Al and an AZ61 alloy. The strain...