Fabrication and properties of novel composites in the system Al–Zr–C

Composite bodies in the system Al–Zr–C, with about 95% relative density, were obtained by heating the compact body of powder mixture consisting of Al and ZrC (5 : 1 mol %) in Ar at 1100–1500°C for various lengths of time. Components of the material heated at more than 1200°C were Al, Al3Zr, ZrC and AlZrC2. The Al3Zr exhibited plate-like aggregation, and its size increased with increasing temperature. In the material heated at 1500°C for 1 h, the largest plate-like Al3Zr aggregation was 2000 m long and 133 m thick. Then the AlZrC2 was present as well-proportioned hexagonal platelet particles with a 8–9 m diameter and a 1–2 m thickness in the interior of the plate-like Al3Zr aggregation and Al matrix phase. The average three-point bending strength of the bodies was 140–190 MPa, and the maximum strength was 203 MPa in the body heated at 1300°C for 1 h. The body heated at 1500°C for 1 h showed high oxidation resistivity to air up to 1000°C.     

Single-crystal growth and characterization of Cu2O and CuO

We have prepared a large number of crystals of cuprous oxide (Cu2O) by various procedures. Photoluminescence spectra of these crystals were studied to examine the concentration of defects, especially copper vacancy VCu to seek favourable conditions for growing Cu2O crystal. High-quality single crystals of Cu2O were prepared by the floating-zone melting method in air. Several synthetic crystals (specimens FA, FZ and GZ) and also a natural crystal were studied by X-ray analysis, inductively coupled plasma spectroscopy analysis, optical absorption, photoluminescence, photoconductivity and cyclotron resonance absorption, photoluminescence, photoconductivity and cyclotron resonance absorption to characterize their optical and electrical qualities. The best values of mobility and scattering time of photocarriers at T = 4.2 K are estimated to be h1.8 × 105 cm2 V–1 s–1 and h60 ps for positive holes, and 1.3 × 105 cm2 V–1 s–1 and 70 ps for electrons in Cu2O. Further, we report preliminary experimental results on transport property of crystals also of cupric oxide (CuO) purified by the floating-zone melting method.     

Thermal conductivity and phonon scattering mechanisms in La#x2212;x#x2212;x#x2212;xMxCuO4

The thermal conductivity of high density La_2–xM_xCuO₄ (M=Ba, Sr) sintered materials was measured between 15K and 150K for the various concentrations of Ba and the phonon thermal conductivity was analyzed comparing with that of Nd_2–xCe_xCuO₄. The pretty large value for pure La₂CuO₄ was drastically diminished by substituting La by a small amount of Ba atoms especially at low temperatures. It was found that a new type of the phonon scattering center such as a two-level tunneling must be taken account of in order to explain the observed reduction.     

Experimental measurement on tangential momentum accommodation coefficient in a single microtube

The tangential momentum accommodation coefficient (TMAC) was investigated experimentally from the mass flow rate through a single microtube under the slip flow and the early part of the transition regime. The measurements were carried out by the constant-volume method under the mean Knudsen number smaller than 0.3, which is based on the mean pressure of the inlet and the outlet of the microtube, to apply the second-order slip boundary condition. To measure TMACs on various materials, quite large microtube was employed, which require the reduction in leakage. TMAC was obtained from the slip coefficient determined by the relation of the mass flow rate to the mean Knudsen number. The obtained mass flow rate was well explained by the theoretical equation. TMACs of deactivated-fused silica with argon, nitrogen, and oxygen were measured, showing the tangential momentum was not accommodated completely to the surface, and the values showed good agreement with previous studies. From the comparison between microtubes with different inner diameter, it is showed that TMAC is determined mainly by gas species and surface material.     

Ultra light-weight and high-resolution X-ray mirrors using DRIE and X-ray LIGA techniques for space X-ray telescopes

We are developing novel ultra light-weight and high-resolution X-ray micro pore optics for space X-ray telescopes. In our method, curvilinear micro pore structures are firstly fabricated by silicon deep reactive ion etching (DRIE) or X-ray LIGA processes. Secondly, side walls of the micro structures are smoothed by magnetic field assisted finishing and/or hydrogen annealing techniques for high reflectivity mirrors. Thirdly, to focus parallel X-ray lights from astronomical objects, these structures are elastically or plastically bent into a spherical shape. Fourthly, the bent structures are stacked to form a multi-stage X-ray telescope. In this paper, we report on fabrication and X-ray reflection tests of silicon and nickel X-ray mirrors using the DRIE and LIGA processes, respectively. For the first time, X-ray reflections were confirmed on both of the mirrors. Estimated rms roughnesses were 5 nm and 3 nm for the silicon and nickel mirrors, respectively.     

Human motion database with a binary tree and node transition graphs

Database of human motion has been widely used for recognizing human motion and synthesizing humanoid motions. In this paper, we propose a data structure for storing and extracting human motion data and demonstrate that the database can be applied to the recognition and motion synthesis problems in robotics. We develop an efficient method for building a human motion database from a collection of continuous, multi-dimensional motion clips. The database consists of a binary tree representing the hierarchical clustering of the states observed in the motion clips, as well as node transition graphs representing the possible transitions among the nodes in the binary tree. Using databases constructed from real human motion data, we demonstrate that the proposed data structure can be used for human motion recognition, state estimation and prediction, and robot motion planning.     

Two-stage subspace identification for softsensor design and disturbance estimation

Softsensors or virtual sensors are key technologies in industry because important variables such as product quality are not always measured on-line. In the present work, two-stage subspace identification (SSID) is proposed to develop highly accurate softsensors that can take into account the influence of unmeasured disturbances on estimated key variables explicitly. The proposed two-stage SSID method can estimate unmeasured disturbances without the assumptions that the conventional Kalman filtering technique must make. Therefore, it can outperform the Kalman filtering technique when innovations are not Gaussian white noises or the characteristics of disturbances do not stay constant with time. The superiority of the proposed method over the conventional methods is demonstrated through numerical examples and application to an industrial ethylene fractionator.     

Automatic extraction of citation information in Japanese patent applications

The need for academic researchers to retrieve patents and research papers is increasing, because applying for patents is now considered an important research activity. However, retrieving patents using keywords is a laborious task for researchers, because the terms used in patents for the purpose of enlarging the scope of the claims are generally more abstract than those used in research papers. Therefore, we have constructed a framework that facilitates patent retrieval for researchers, and have integrated research papers and patents by analysing the citation relationships between them. We obtained cited research papers in patents using two steps: (1) detection of sentences containing bibliographic information, and (2) extraction of bibliographic information from those sentences. To investigate the effectiveness of our method, we conducted two experiments. In the experiment involving Step 1, we prepared 42,073 sentences, among which a human subject manually identified 1,476 sentences containing citations of papers. For Step 2, we prepared 3,000 sentences, in which the titles, authors, and other bibliographic information were manually identified. We obtained a precision of 91.6%, and a recall of 86.9% in Step 1, and a precision of 86.2% and a recall of 85.1% in Step 2. Finally, we constructed an information retrieval system that provided two methods of retrieving research papers and patents. One method was retrieval by query, and another was from the citation relationships between research papers and patents.     

Strength Analysis of Yttria-Stabilized Tetragonal Zirconia Polycrystals

Tensile strength of Y₂O₃-stabilized ZrO₂ polycrystals (Y-TZP) was measured by a newly developed tensile testing method with a rectangular bar. The tensile strength of Y-TZP was lower than that of the three-point bend strength, and the shape of the tensile strength distribution was quite different from that of the three-point bend strength distribution. It was difficult to predict the distribution curve of the tensile strength using the data of the three-point bend strength by one-modal Weibull distribution. The distribution of the tensile strength was analyzed by two- or three-model Weibull distribution coupled with an analysis of fracture origins. The distribution curve of the three-point bend strength which was estimated by multimodal Weibull distribution agreed favorably with that of the measured three-point bend strength values. A two-modal Weibull distribution function was formulated approximately from the distributions of the tensile and three-point bend strengths, and the estimated two-modal Weibull distribution function for the four-point bend strength agreed well with the measured four-point bend strength.     

First measurement of electron temperature from signal ratios in a double-pass Thomson scattering system

This paper presents an experimental demonstration to determine electron temperature (T(e)) with unknown spectral sensitivity (transmissivity) in a Thomson scattering system. In this method, a double-pass scattering configuration is used and the scattered lights from each pass (with different scattering angles) are measured separately. T(e) can be determined from the ratio of the signal intensities without knowing a real chromatic dependence in the sensitivity. Note that the wavelength range for each spectral channel must be known. This method was applied to the TST-2 Thomson scattering system. As a result, T(e) measured from the ratio (T(e,r)) and T(e) measured from a standard method (T(e,s)) showed a good agreement with <∣T(e,r) - T(e,s)∣∕T(e,s)> = 7.3%.