An it Architecture for Nimble Organizations: Managing Access from Cyberspace

In today's world of “co-opetition” among organizations, where one organization competes and cooperates simultaneously with business partners, all organizations must have IT architectures that are nimble and flexible. This article takes a look at one important aspect in achieving a flexible IT architecture: access management of information resources over the Web. It describes an access management architecture that can change as business does and recommends how best to implement this nimble architecture.     

Effectiveness of sodium silicate as gangue depressants in iron ore slimes flotation

The recovery of iron from the screw classifier overflow slimes by direct flotation was studied.The relative effectiveness of sodium silicates with different silica-to-soda mole ratios as depressants for silica and silicate bearing minerals was investigated.Silica-to-soda mole ratio and silicate dosage were found to have significant effect on the separation efficiency.The results show that an increase of Fe content in the concentrate is observed with concomitant reduction in SiO2 and Al2O3 levels when a particular type of sodium silicate at a proper dosage is used.The concentrate of 58.89wt％ Fe,4.68wt％ SiO2,and 5.28wt％ Al2O3 with the weight recovery of 38.74％ and the metal recovery of 41.13％ can be obtained from the iron ore slimes with 54.44wt％ Fe,6.72wt％ SiO2,and 6.80wt％ Al2O3,when Na2SiO3 with a silica-to-soda mole ratio of 2.19 is used as a depressant at a feed rate of 0.2 kg/t.     

Post-buckling behaviour of moderately thick cylindrically orthotropic annular plates

A finite element formulation including the effects of shear deformation and cylindrically orthotropic material properties is described for studying the post-buckling behaviour of annular plates. Numerical results for the buckling load parameter and ratios of nonlinear load parameter to buckling load parameter for various values of orthotropic properties, thicknesses and radii ratios of the plates are presented.     

Enhanced green emission from Tb-Bi co-doped GdAlO3 nanophosphors

Bi³⁺ and Tb³⁺ ions co-doped GdAlO₃ (GAP) nanophosphors have been synthesized by means of solvothermal reaction method. The XRD pattern of GAP phosphor confirms their orthorhombic phase. The luminescence properties of these phosphors have been explored by analyzing their excitation and emission spectra along with their decay curves. The excitation spectra of GAP:Tb³⁺, Bi³⁺ phosphors consist of a broad band in the shorter wavelength region due to the 4f⁸ → 4f⁷5d¹ transition of Tb³⁺ ions overlapped with the 6s² → 6s¹6p¹ (¹S₀ → ³P₁) transition of Bi³⁺ ions and some sharp peaks in the longer wavelength region due to f → f transitions of Tb³⁺ ions. The present phosphors exhibit green color due to strong ⁵D₄ → ⁷F₅ transition of Tb³⁺ ions. The emission intensity was enhanced by co-doping with Bi³⁺ ions under 292 nm excitation, which indicate that the efficient energy transfer occurred from Bi³⁺ to Tb³⁺ ions.     

Analgesic Effect of Tranilast in an Animal Model of Neuropathic Pain and Its Role in the Regulation of Tetrahydrobiopterin Synthesis

Trigeminal neuralgia is unilateral, lancinating, episodic pain that can be provoked by routine activities. Anticonvulsants, such as carbamazepine, are the drugs of choice; however, these possess side-effects. Microvascular decompression is the most effective surgical technique with a higher success rate, although occasionally causes adverse effects. The potential treatment for this type of pain remains unmet. Increased tetrahydrobiopterin (BH4) levels have been reported in association with axonal injury. This study aimed to evaluate the effect of tranilast on relieving neuropathic pain in animal models and analyze the changes in BH4 synthesis. Neuropathic pain was induced via infraorbital nerve constriction. Tranilast, carbamazepine, or saline was injected intraperitoneally to assess the rat’s post-intervention pain response. In the von Frey’s test, the tranilast and carbamazepine groups showed significant changes in the head withdrawal threshold in the ipsilateral whisker pad area. The motor coordination test showed no changes in the tranilast group, whereas the carbamazepine group showed decreased performance, indicating impaired motor coordination. Trigeminal ganglion tissues were used for the PCR array analysis of genes that regulate the BH4 pathway. Downregulation of the sepiapterin reductase (Spr) and aldoketo reductase (Akr) genes after tranilast injection was observed compared to the pain model. These findings suggest that tranilast effectively treats neuropathic pain.     

Effect of CuO on the sintering and cryogenic microwave characteristics of (Zr0.8Sn0.2)TiO4 ceramics

The effect of CuO on the sintering temperature, microstructure and microwave dielectric properties of (Zr_0.8Sn_0.2)TiO₄ (ZST) modified with 1 wt% of ZnO has been investigated. Microwave dielectric properties of ZST ceramics are measured from cryogenic to room temperatures (15–290 K). Crystallite sizes of sintered ZST ceramics as derived from XRD are in the 30–50 nm range. The addition of CuO effectively reduced the sintering temperature to 1300 1C, possibly due to liquid-phase effects. Addition of CuO did not cause any secondary phases up to 1.5 wt% of CuO. The dielectric constant (ε_r) and temperature coefficient of resonant frequency (ε_f) of ZST ceramics do not significantly vary with temperature, whereas the unloaded quality factor (Q_u) changes noticeably. It is found that the Q_u factor of the sample without CuO decreased with increase in temperature, whereas the samples with addition of CuO up to 1.0 wt% showed less dependence on temperature. The Q_u factor of CuO-free ZST is 15,000 and that of ZST with 0.5 wt% of CuO is 11,800 at 15 K. The Q_u factor while measured at room temperature ranged between 2900 and 7000. Efforts were made to understand whether the increase in Q_u factor at both cryogenic and room temperatures is the result of intrinsic or extrinsic factors.     

Novel organic–inorganic hybrid coatings prepared by the sol–gel process: corrosion and mechanical properties

(Hyperbranched polyurethane‐urea)/[(3‐aminopropyl)triethoxysilane]‐ZnO (HBPUU‐APTES‐ZnO) hybrid coatings were synthesized using an inexpensive mixing technique by varying the APTES‐modified ZnO concentration. The mechanical and surface properties of the hybrid coating films were studied and compared with unmodified and modified ZnO. The corrosion, solvent and abrasion resistance show significant enhancement in HBPUU‐APTES‐ZnO hybrids and their properties are increased with increasing APTES‐ZnO concentration. This hybrid coating has opened up an opportunity for automotive topcoat application. Copyright © 2012 Society of Chemical Industry     

Two-step sintering technique for enhancing mechanical and oxygen permeation properties of dual-phase oxygen transport membranes

The present work involved the application of a two-step sintering (TSS) technique for typical Ce_0.9Gd_0.1O_2?δ–La_0.6Sr_0.4Co_0.2Fe_0.8O_3–δ (GDC–LSCF) composites and its effect on the microstructure and resultantly mechanical and O₂-permeating properties. The samples obtained by conventional sintering (CS) performed at 1100, 1250, and 1400 °C for 3 h exhibited maximum flexural strength and hardness values of 142 MPa and 8.71 GPa, respectively. However, the application of a TSS procedure produced fine-grained microstructures with improved mechanical properties. In particular, with the use of a typical 1250/1200 TSS protocol, increases of approximately 31 % and 7% in the flexural strength and hardness values, respectively, were observed compared to those obtained using the CS method. Moreover, thick-film (～ 60 μm) GDC–LSCF membrane prepared by tape casting and the TSS technique showed remarkably 1.5–2 times higher oxygen permeation flux than membrane sintered by CS method. The results are discussed and explained in detail.     

Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.