Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Spontaneous hydrolytic degradability of copolyesters having tetrahydropyran rings in their backbones

Homo- and copolyesters, containing 2,5-linked tetrahydropyran rings in their backbones, were prepared by cationic ring-opening polymerization of bicyclic lactones, 2,6-dioxabicyclo [2.2.2] octan-3-one ( 1 ), and its 4-methoxy-carbonyl and 4-methoxy-carbonyl and 4-benzyloxycarbonyl derivatives ( 3 and 4 ). Copolyesters, having pendant carboxyl groups, were derived from the copolymers containing 4 as one of the comonomers by the catalytic hydrogenolysis of the pendant benzyloxy–carbonyl groups. Copolyesters, containing both 2,5-linked and 2,6-linked tetrahydropyran rings in the main chains, were obtained by the copolymerization of 1 with 6,8-dioxabicyclo [3.2.1] octan-7-one ( 13 ), which is a structural isomer of 1 . Spontaneous hydrolytic degradability of these polyesters was investigated in a phosphate buffer solution (pH 7.5) at 27°C. The degradability of the polyesters markedly depended on the molecular structure: hydrophobic pendant groups retarded the hydrolytic degradation, whereas hydrophilic pendant groups accelerated it. In particular, a small amount of pendant carboxyl groups significantly enhanced the hydrolytic degradability of the copolyesters from 1 . Polyesters, containing 2,6-linked tetrahydropyran rings in their backbones, underwent hydrolytic degradation more readily than those entirely consisting of 2,5-linked tetrahydropyran rings. © 1994 John Wiley & Sons, Inc.     

Mating-induced mating-type cassette conversion in Saccharomyces cerevisiae

We have previously reported that the HMRa-bearing restriction fragment of a rho degrees sir4-11 strain (HMLalpha-MATalpha-HMRa), which acts as an alpha-mater because of being rho degrees , changes its electrophoretic mobility when the strain mates with a certain group of a-mating strains (HMLalpha-MATa-HMRa). In this study, we found that the sir4-11 strain being rho degrees was not essential for this phenomenon and also that the altered form of the fragment contained HMRalpha in place of HMRa. Furthermore, we observed conversion of HMLa to HMLalpha in the cross in which a sir4-11 HMLa-MATalpha-HMRalpha strain was mated with a representative of the above-mentioned a-mating strain. In addition, when this a-mating strain was mated with a SIR(+) HMLalpha-MATa-HMRalpha strain, the resultant diploid was found to be HMLalpha/HMLalpha MATa/MATalphaHMRa/HMRalpha, indicating that conversion of MATa to MATalpha had taken place in the course of mating. From all these observations, we conclude that there is a group of S. cerevisiae strains that carries factor(s) that induces conversion of a mating-type cassette of the mating partner to alpha mating-type cassette and that this mating type cassette conversion takes place in all three mating type loci, HML, MAT and HMR, if the loci are in the non-silenced condition.     

Efficient synthesis of nonnatural mutants in Escherichia coli S30 in vitro protein synthesizing system

Factors that affect the efficiency of in vitro synthesis of mutant proteins that contain nonnatural amino acids were investigated. The process of the nonnatural mutagenesis consists of chemical aminoacylation of a tRNA that contains a 4-base anticodon, followed by in vitro synthesis in the presence of an mRNA that contains the corresponding 4-base codon. Detailed studies on the time courses of the synthesis revealed two major factors that suppress the yield of nonnatural mutants compared with the wild-type protein. First, a cyclic tRNA that exists as a by-product of the chemical aminoacylation inhibits the protein synthesis. Second, the very short lifetime of a tRNA aminoacylated with a nonnatural amino acid limits the protein yield. As a simple and practical way of surmounting these factors, aminoacyl tRNA was added into the in vitro system at 5 min after the start of the synthesis. The addition increased the protein yield up to the level of conventional proteins in the in vitro system.     

A Quantitative Approach for Correction of Background Counts: Determination of Left Ventricular Ejection Fraction by Radionuclide Angiocardiography

A quantitative approach for correction of background counts is described for determination of the left ventricular ejection fraction from first-pass radionuclide angiocardiography. First, the method is investigated theoretically and numerically using a mathematical model. It is demonstrated that the ejection fraction can be estimated relatively well, even in a noisy situation. Second, the method is applied to the left ventricular time-activity curves from two different regions of interest, the carefully selected and the laxly selected, and these are compared to each other. Good agreement (correlation coefficient = 0.96) for 20 patients was obtained between the ejection fractions from the carefully selected region of interest and those from the laxly selected one.     

Microwave-assisted steam distillation for simple determination of polychlorinated biphenyls and organochlorine pesticides in sediments

A novel sample extraction technique for polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) analysis using microwave-heating device is developed. In this study, microwave-assisted extraction (MAE) and steam distillation techniques were combined. Desorption of the anatytes from solid matrixes was accelerated with water vapor which was generated by microwave irradiation. A sample holder in a commercial microwave extraction cell kept the sample from direct contact with the organic solvent for analytes trapping during the treatment process. Therefore, relatively clean extracts were obtained with small amount of solvents. Without any cleanup steps, the obtained extract could be analyzed with gas chromatograph/mass spectrometers (GC/MS). Six PCB congeners (PCB15, 28, 70, 101, 180, 194, 209) and three OCPs (gamma-HCH, 4,4'-DDE, 4,4'-DDD) in two marine sediment samples (a sediment collected from a bay of Kyusyu Island, Japan, and a certified reference material NIST SRM1944) were analyzed by using this microwave-assisted steam distillation (MASD) technique and another extraction method (exhaustive steam distillation, MAE, and Soxhlet extraction); and comparisons of the results are shown in this report. Although recovery yields of highly chlorinated biphenyls (PCB180, 194, 209) and relatively polar OCPs (gamma-HCH, 4,4'-DDD) were low (30-60%) compared with other analytes (PCB15, 28, 70, 101, 4,4'-DDE; recovery, 80-100%), use of isotope labeled internal standards for the MASD technique gave comparable results with the values obtained by other extraction methods and the certified values in the samples.     

Remarkable enhancement in durability of Pd/H-ZSM-5 zeolite catalysts for CH4-SCR

Effect of second components on the catalytic performance of Pd/H-ZSM-5 zeolite (Pd: 0.4 wt.%) was evaluated by a durability test of NO reduction with CH₄ at a relatively high temperature of 500°C in the presence of water vapor for a prolonged period. The Pd/H-ZSM-5 showed high stable activity for this reaction without H₂O in the reactant feed, while immediate and irreversible deactivation was observed in the presence of H₂O, resulting in no activity after 7 h. The second components such as Co, Rh, Ag, Ce, and Fe introduced individually to the Pd/H-ZSM-5 enhanced the durability, and in particular the addition of 3.3 wt.% Co led to a stable NO conversion for more than 40 h in the presence of H₂O.     

TEM,XPS and SIMS Analyzes on Grain Boundary of Lanthanum Chromites

The morphological characteristics, chromium valence state, and cation transport in the vicinity of grain boundary in La_1-xCa_xCrO₃ were investigated by using TEM/EDS, XPS and SIMS techniques. The width of grain boundary was around 1 nm where anomalous enrichment of calcium was observed. Higher valence state of chromium such as Cr⁶⁺(d⁰) was detected in the grain boundaries whereas Cr³⁺(d³) and Cr⁴⁺(d²) were dominant in the bulk. Very fast interdiffusion of alkaline earths was observed in the Sr²⁺-La_0.75Ca_0.25CrO₃ system. All observed phenomena were correlated by assuming the A-site vacancy which may be induced by the formation of Cr⁶⁺ at grain boundaries.     

Densification of magnesia-based inert matrix fuels using asbestos waste-derived materials as a sintering additive

A new concept for densification of minor actinide-containing inert matrix fuels (IMFs) using asbestos waste-derived materials was proposed for the effective utilization of resources and health protection of the general public. In this concept, magnesium silicates, which are mainly generated by the decomposition of asbestos in low temperature heat-treatments, are used as a sintering additive to achieve high density magnesia (MgO) -based IMFs at relatively low sintering temperature. In the present study, preliminary fabrication tests of MgO-based IMFs with magnesium silicates were carried out using cerium oxide (CeO₂) as a representative of minor actinide oxides. The sintered densities of MgO-based IMFs increased with use of the additives. The sintering behavior of MgO-based IMFs with magnesium silicate additives was discussed from the viewpoints of the effects of magnesium silicates on the densification of the MgO and CeO₂.