Thermophysical properties of (U,Y)O2

We prepared polycrystalline pellets of (U,Y)O₂, containing YO_1.5 up to 11 mol.%. We performed indentation tests on the pellets, and evaluated the Young’s modulus and hardness. We measured the heat capacity and the thermal diffusivity, and evaluated the thermal conductivity. We succeeded in evaluating the effect of Y content on the thermophysical properties of (U,Y)O₂. We revealed that the Young’s modulus, hardness, and thermal conductivity of (U,Y)O₂ decreased with increasing the Y content.     

Quantitative risk assessment using a Japanese hydrogen refueling station model

Although hydrogen refueling stations (HRSs) are becoming widespread across Japan and are essential for the operation of fuel cell vehicles, they present potential hazards. A large number of accidents such as explosions or fires have been reported, rendering it necessary to conduct a number of qualitative and quantitative risk assessments for HRSs. Current safety codes and technical standards related to Japanese HRSs have been established based on the results of a qualitative risk assessment and quantitative effectiveness validation of safety measures over ten years ago. In the last decade, there has been much development in the technologies of the components or facilities used in domestic HRSs and much operational experience as well as knowledge to use hydrogen in HRSs safely have been gained through years of commercial operation. The purpose of the present study is to conduct a quantitative risk assessment (QRA) of the latest HRS model representing Japanese HRSs with the most current information and to identify the most significant scenarios that pose the greatest risks to the physical surroundings in the HRS model. The results of the QRA show that the risk contours of 10^?3 and 10^?4 per year were confined within the HRS boundaries, whereas the risk contours of 10^?5 and 10^?6 per year are still present outside the HRS. Comparing the breakdown of the individual risks (IRs) at the risk ranking points, we conclude that the risk of jet fire demonstrates the highest contribution to the risks at all of the risk ranking points and outside the station. To reduce these risks and confine the risk contour of 10^?6 per year within the HRS boundaries, it is necessary to consider risk mitigation measures for jet fires.     

A Phylogenetic Analysis of Saccharomyces Species by the Sequence of 18S–28S rRNA Spacer Regions

Sequences of two internally transcribed spacer regions between 18S and 28S rRNA genes were determined to assess the phylogenetic relationship in the strains belonging to the genus Saccharomyces. The sequences of S. bayanus and S. pastorianus were quite similar, but not identical. Two phylogenetic trees constructed by the neighbor-joining method showed that all the species examined were distinguished from one another. The Saccharomyces sensu stricto species: S. cerevisiae, S. bayanus, S. paradoxus and S. pastorianus, were closely related and far from the Saccharomyces sensu lato species including S. barnetti, S. castellii, S. dairensis, S. exiguus, S. servazzii, S. spencerorum and S. unisporus, and an outlying species, S. kluyveri. © 1997 John Wiley & Sons, Ltd.     

Synthesis of polyoxyethylene derivatives of diesters of sucrose with long-chain fatty acids

Summary Since the long-chain fatty acid sucrose diesters inevitably produced in the synthesis of monoesters are only slightly soluble in water, no important use can be found for them at the present time except as oilsoluble emulsifying agents. In order to exploit new uses we have attempted to improve their solubility in water by introducing oxyethylene radicals into the molecule. The addition reaction of ethylene oxide with the sucrose diesters was carried out in an autoclave in the presence of alkaline catalysts. With the reaction temperature maintained between 100–130° the pressure decreased as the reaction proceeded, and one to two hours were required to consume the ethylene oxide used. The addition products are yellow or orange oily materials soluble in water. Aqueous solutions showed good surface-active properties.     

Selective nonanal molecular recognition with SnO2 nanosheets for lung cancer sensor

SnO₂ nanosheets were developed to detect nonanal gas in the order of ppb which was a marker of lung cancer. The nanosheets showed higher resistance change in nonanal gas than that in carbon monoxide (CO), nitrogen dioxide (NO₂), acetone (CH₃COCH₃), hydrogen (H₂), ethanol (C₂H₆O), ammonia (NH₃), hydrogen sulfide (H₂S), formaldehyde (HCHO), acetaldehyde (CH₃CHO), or butanal (C₄H₈O). Crystal surfaces of the nanosheets would be effective for adsorption of nonanal molecules. Furthermore, it was shown that resistance changed with an increase in carbon number in aldehyde. The nanosheets had molecular selectivity for a series of aldehyde molecules. Molecular recognition of the nanosheets gave us a great advantage to detect nonanal gas which was produced by lung cancer.     

C57BL/KsJ-db/db-Apc Mice Exhibit an Increased Incidence of Intestinal Neoplasms

The numbers of obese people and diabetic patients are ever increasing. Obesity and diabetes are high-risk conditions for chronic diseases, including certain types of cancer, such as colorectal cancer (CRC). The aim of this study was to develop a novel animal model in order to clarify the pathobiology of CRC development in obese and diabetic patients. We developed an animal model of obesity and colorectal cancer by breeding the C57BL/KsJ-db/db (db/db) mouse, an animal model of obesity and type II diabetes, and the C57BL/6J-Apc(Min/+) (Min/+) mouse, a model of familial adenomatous polyposis. At 15 weeks of age, the N9 backcross generation of C57BL/KsJ-db/db-Apc(Min/+) (db/db-Min/+) mice developed an increased incidence and multiplicity of adenomas in the intestinal tract when compared to the db/m-Min/+ and m/m-Min/+ mice. Blood biochemical profile showed significant increases in insulin (8.3-fold to 11.7-fold), cholesterol (1.2-fold to 1.7-fold), and triglyceride (1.2-fold to 1.3-fold) in the db/db-Min/+ mice, when compared to those of the db/m-Min/+ and m/m-Min/+ mice. Increases (1.4-fold to 2.6-fold) in RNA levels of insulin-like growth factor (IGF)-1, IRF-1R, and IGF-2 were also observed in the db/db- Min/+ mice. These results suggested that the IGFs, as well as hyperlipidemia and hyperinsulinemia, promoted adenoma formation in the db/db-Min/+ mice. Our results thus suggested that the db/db-Min/+ mice should be invaluable for studies on the pathogenesis of CRC in obese and diabetes patients and the therapy and prevention of CRC in these patients.     

Fabrication of fluorine-terminated diamond-like carbon thin film using a hyperthermal atomic fluorine beam

Surface modification of diamond-like carbon (DLC) film was performed using a hyperthermal atomic fluorine beam on the purpose of production of hydrophobic surface by maintaining the high hardness of DLC film. By the irradiation of atomic fluorine beam of a 1.0 × 10²⁰ atoms/cm², the contact angle of a water drop against the DLC surface increased from 73° to 111°. The formation of CF₃, CF₂ and CF bonding on the modified DLC surface was confirmed from the measurements of X-ray photoelectron spectra and near-edge X-ray absorption fine structure spectra. Irradiation of hyperthermal atomic fluorine beam was concluded to produce insulator fluorine-terminated DLC film, which has high F content on the surface, by the taking of the use of neutral atomic beam as a fluorine source.     

Colorless polyimides with low coefficient of thermal expansion derived from alkyl‐substituted cyclobutanetetracarboxylic dianhydrides

Alkyl‐substituted cyclobutanetetracarboxylic dianhydrides (CBDAs) were synthesized by photo‐dimerization of alkyl‐substituted maleic anhydrides to obtain novel colorless polyimides (PIs). Dimethyl‐substituted CBDA (DM‐CBDA) showed much higher polymerizability with various diamines than conventional cycloaliphatic tetracarboxylic dianhydrides and led to high molecular weights of PI precursors. Polyaddition of non‐substituted CBDA and trans‐1,4‐cyclohexanediamine (t‐CHDA) was completely inhibited by salt formation in the initial reaction stage. The use of DM‐CBDA allowed the formation of a homogeneous/viscous PI precursor solution by overcoming the salt formation problem. The prominent substituent effect probably reflects how the methyl substituents of DM‐CBDA contributed to increasing the salt solubility. Some of the thermally imidized DM‐CBDA‐based systems simultaneously possessed non‐coloration, low coefficient of thermal expansion (CTE), very high T_g exceeding 300 °C and very low dielectric constant. Copolymerization was very effective for improving the solubility of DM‐CBDA‐based PIs. The copolyimide cast films prepared via chemical imidization displayed a further decreased CTE without sacrificing other target properties, suggesting that the present materials can be useful as plastic substrates in display devices. The mechanism of self‐chain orientation behavior during solution casting is also discussed. A potential application of the copolyimide systems as optical compensation film materials in liquid crystal displays is proposed. © 2013 Society of Chemical Industry .     

Effects of hydrophilicity of crosslinker on membrane properties of poly(N-hydroxyethyl-L-glutamine) hydrogels

Summary Poly(N-hydroxyethyl-L-glutamine) (PHEG) hydrogels were prepared by aminolysis of poly( -benzyl L-glutamate) with 2-aminoethanol and hydrophobic or hydrophilic crosslinkers, and the effect of the hydrophobicity of the crosslinkers was evaluated. The swelling properties, tensile properties and enzymatic degradation behavior were studied in phosphate buffered saline (PBS). The swelling ratio and degradation rate of these hydrogels were highly dependent on the hydrophobicity of the crosslinkers, while tensile properties were dependent on the swelling ratio, but not on the hydrophobicity of the crosskinkers.     

EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN CLOSED SUPERHEATED STEAM DRYING

The effects of operational conditions on the drying performance in closed superheated steam drying were examined theoretically and experimentally. The vapor generated from the sample was circulated in the drying chamber. In the theoretical analysis, the replacement of air with vapor in drying chamber and the convective vapor transfer in sample were considered. At the start of drying, the drying chamber was filled with air. As the drying proceeded, the air was replaced with the vapor generated from sample. The calculated results explained the characteristics of experimental data. The pore diameter of sample had little effect on the drying characteristics. During the internal evaporation period, the evaporation occurred in the narrow zone, which moved from the surface to the bottom of sample. The convective vapor transfer in sample had a significant influence on the drying performance. The excess increments in temperature and velocity of drying gas hardly contributed to shortening the drying time.