Preparation of ion exchange membranes by preirradiation induced grafting of styrene/divinylbenzene into crosslinked PTFE films and successive sulfonation

Ion exchange membranes (IEMs) were prepared by preirradiation induced grafting of styrene with or without divinylbenzene (DVB) into crosslinked polytetrafluoroethylene (RX‐PTFE) films and successively sulfonated by chlorosulfonic acid. The effects of the DVB concentration and solvent on the kinetic of the graft polymerization were studied. The ion exchange capacity (IEC) values of the prepared membranes ranging from 1.5 to 2.8 mequiv/g were obtained. The degree of swelling increased with the increase in the degree of grafting, while higher crosslinking density of both the RX‐PTFE matrices and the grafts suppressed the degree of swelling. The chemical stabilities of the IEMs were tested by recording the weight of the membranes being soaked in hot H₂O₂ solutions. The weight‐time curves of the prepared membranes showed one‐step quick decrease due to the decomposition of the poly(styrene‐sulfonic acid) (PSSA) grafts. Higher crosslinking density in both the RX‐PTFE matrices and the grafts improved the chemical stability of the IEMs. The ionic conductivity of the IEMs increases with the increase in the IEC values. The IEMs with IEC values higher than 2.2 mequiv/g hold the higher ionic conductivity than that of Nafion® 112 membrane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3587–3599, 2006     

Photoluminescence properties of La2O3 methane coupling catalysts

La₂O₃ catalysts prepared at 923 K (La₂O₃-LT) and 1073 K (La₂O₃-HT) exhibit different photoluminescence properties due to notably different concentrations of ions in position of low coordination at the surface or coordinatively unsaturated surface sites (cus). The catalyst which exhibits the higher yields of photoluminescence due to the higher concentration of cus corresponds to the one which gives the higher C₂₊ selectivity in the oxidative methane coupling reaction. On leave of absence from Laboratoire de Réactivité de Surface, Université Pierre et Marie Curie, URA 1106-CNRS, 75252 Paris Cedex, France.     

Targeted proteome analysis of microalgae under high-light conditions by optimized protein extraction of photosynthetic organisms

1. Download high-res image (294KB)
2. Download full-size image

     

Analysis of tetrodotoxin in puffer-fish by LC/MS

A simple and reliable method using liquid chromatography/electrospray ionization-mass spectrometry (LC/ESI-MS) for the analysis of tetrodotoxin in puffer-fish was developed. Tetrodotoxin in puffer-fish was extracted with 0.1% acetic acid by heating in a boiling water bath, and the extracts were cleaned up on a Bond Elut C18 (500 mg) cartridge. The LC separation was performed on a TSK-gel ODS 80Ts column (25 cm x 2 mm i.d.) using 5 mmol/L heptafluoro-n-butyric acid (HFBA)-methanol (99:1) as the mobile phase at a flow rate of 0.2 mL/min. Positive ionization produced a typical [M + H]+ molecular ion of tetrodotoxin (m/z 320.1). The calibration graph for tetrodotoxin was rectilinear from 0.1 to 1 microgram/mL with selected ion monitoring (SIM). The detection limit of tetrodotoxin in puffer-fish was 1 microgram/g (equivalent to ca. 5 MU/g).     

Cs-Te photocathode RF electron gun for applied research at the Waseda University

A compact electron accelerator based on photo-cathode RF electron gun is under development for applied research at the Waseda University. Higher charge and higher energy are key issues for applications such as pulse radiolysis experiment and laser-Compton X-ray generation. The new RF-gun cavity with cesium telluride (Cs-Te) photo-cathode which has higher quantum efficiency (Q.E.) compared with metal cathodes has been installed. The evaluation of Q.E. of the photo-cathode has been performed and the value obtained is more than 5% at the preparation stage. For understanding the Cs-Te cathode properties and the higher Q.E. operation, fundamental studies by single bunch beam operation have been performed resulting in more than 6 nC bunch charge with a high Q.E. of 2.9%. Additionally, the new RF-gun cavity was improved for obtaining a higher Q value. Higher beam energy, i.e. shunt impedance compared with old type cavity, was observed. The shunt impedance increased by about 20%. These successful results will considerably contribute to the applied research.     

Ammonia decomposition to clean hydrogen using non-thermal atmospheric-pressure plasma

The plasma decomposition of ammonia was studied as a function of applied voltage/power, residence time including length of an inner electrode and flow rate of reactant gases, partial pressure of ammonia, and amount and the metal species of the inner electrodes. The ammonia decomposition rates were in excellent agreement with the hydrogen production rates and no hydrazine production was detected, indicating the clean decomposition of ammonia in the current system. The decomposition rates were dependent on the applied power and the residence time and independent of metal species of the inner electrodes, in contrast to the strong dependence of the ammonia synthesis reaction on the metal species. A hydrogen yield of 100% was achieved with an applied power of approximately 50 W and a residence time of 1.2 s at ambient temperature and atmospheric pressure, with an applied voltage of 5 kV and a frequency of 50 kHz.     

Washing Lime-Pretreated Rice Straw with Carbonated Water Facilitates Calcium Removal and Sugar Recovery in Subsequent Enzymatic Saccharification

Generally, Ca(OH)₂ pretreatment of lignocellulosics for fermentable sugar recovery requires a subsequent washing step for calcium removal and pH control for optimized saccharification. However, washing Ca(OH)₂-pretreated feedstock with water is considered problematic because of the low solubility of Ca(OH)₂ and its adsorption to biomass. In this study, we estimated the availability of carbonated water for calcium removal from the slurry of Ca(OH)₂-pretreated rice straw (RS). We tested two kinds of countercurrent washing sequences, four washings exclusively with water (W4) and two washings with water and subsequent two washings with carbonated water (W2C2). The ratios of calcium removal from pretreatment slurry after washing were 64.2 % for the W4 process and 92.1 % for the W2C2 process. In the W2C2 process, 49 % of the initially added calcium was recovered as CaO by calcination. In enzymatic saccharification tests under a CO₂ atmosphere at 1.5 atm, in terms of recovery of both glucose and xylose, pretreated, feedstock washed through the W2C2 process surpassed that washed through the W4 process, which could be attributed to the pH difference during saccharification: 5.6 in the W2C2 process versus 6.3 in the W4 process. Additionally, under an unpressurized CO₂ atmosphere at 1 atm, the feedstock washed through the W2C2 process released 78.5 % of total glucose residues and 90.0 % of total xylose residues. Thus, efficient removal of calcium from pretreatment slurry would lead to not only the recovery of added calcium but also the proposal of a new, simple saccharification system to be used under an unpressurized CO₂ atmosphere condition.     

Cellulase Production of Trichoderma reesei (Hypocrea jecorina) by Continuously Fed Cultivation Using Sucrose as Primary Carbon Source

To expand the range of soluble carbon sources for our enzyme production system, we investigated the properties of sucrose utilization and its effect on cellulase production by Trichoderma reesei M2-1. We performed batch cultivation of T. reesei M2-1 on sucrose and related sugars along with cellobiose, which was used as a cellulase inducer. The results clearly revealed that the hydrolysis products of sucrose, i.e. glucose and fructose, but not sucrose, can be used as a carbon source for enzyme production. In a 10-day continuous feeding experiment using invertase-treated sucrose/cellobiose, the fungal strain produced cellulases with a filter paper-degrading activity of 20.3 U/mL and production efficiency of 254 U/g-carbon sources. These values were comparable with those of glucose/cellobiose feeding (21.2 U/mL and 265 U/g-carbon sources, respectively). Furthermore, the comparison of the specific activities clearly indicated that the compositions of both produced enzymes were similar. Therefore, enzymatically hydrolyzed sucrose can be utilized as an alternative carbon source to glucose in our enzyme production system with T. reesei M2-1.