Measurements of gamma-ray emission probabilities of 241, 243Am and 239Np

Gamma-ray emission probabilities of ^{241, 243}Am and ²³⁹Np have been precisely measured with gamma- and alpha-ray spectroscopic methods. The activities of the samples were determined by measuring alpha particles using a Si semiconductor detector. Gamma rays emitted from the samples were measured with a planar type High-Purity Germanium (HPGe) detector. An efficiency curve of the HPGe detector was derived with uncertainties from 0.7% to 2.5% by combining measured efficiencies and Monte Carlo simulation. The gamma-ray emission probabilities for the major gamma rays of these nuclides were determined with uncertainties less than 1.2%.     

13 years’ operational experience of SPring-8 vacuum system

The first electron beam was stored in SPring-8 storage ring in March 1997. An overview of the 13 years’ operational experience concerning the vacuum system of the SPring-8 storage ring is presented. The evolution of the vacuum system and their performance are summarized. Moreover, the main vacuum failures and their impact on accelerator operation are described in detail. We analyze the relationship between the difference types of vacuum failure and downtime of user experiment.     

Growth of AgGaTe2 and AgAlTe2 Layers for Novel Photovoltaic Materials

AgGaTe₂ and AgAlTe₂ layers were grown on a-plane sapphire substrates by closed-space sublimation. These compounds replace Cd in CdTe with group I and III elements, and are, hence, expected to be ideal novel candidate materials for solar cells. The grown layers were confirmed to be stoichiometric AgGaTe₂ and AgAlTe₂ by x-ray diffraction (XRD). The AgAlTe₂ layers had strong preference for the (112) orientation. The XRD spectrum of the AgGaTe₂ layer was different from that of the AgAlTe₂ layer, and strong peaks were observed for (103) and (110) diffraction. The variation in orientations of the grown layers was analyzed in detail by use of XRD pole figures, which revealed that the AgGaTe₂ layers had an epitaxial relationship with the a-plane sapphire substrates.     

Investigation on twisting distortion of thin plate stiffened structure under welding

The welding distortion of thin plate was selected as research subject, which causes loss of dimensional control, structural integrity and increases fabrication costs for straightening. To study the characteristic of the welding distortion on thin plate structures, experiments were conducted. The test model was a thin plate stiffened structure and a large twisting distortion was observed. The welding distortion of the same structure was analyzed as a large deformation problem using a thermal elastic plastic FEM and an elastic FEM based on the concept of inherent deformation. The computed results by both methods showed the twisting distortion which is a typical buckling type deformation and the magnitude of this distortion agreed well with the experimental measurement.     

微波场中加热高钛高炉渣的数值模拟

利用微波加热技术在高钛高炉渣内引发裂纹的实验过程中发现炉渣局部区域发生热失控现象.为探寻高钛高炉渣在微波场中产生热失控的原因,使用 FEMAP 和 wave-jω 软件计算了在多模式微波炉中高钛高炉渣及其周围空间内微波场和热三维分布情况,并对比研究了钙钛矿相和普通高炉渣吸收微波的能力.通过计算结果可知几乎所有的微波能都集中在被加热的高钛高炉渣试样中,即微波具有加热高钛渣自身而非周围环境的特点.另外,高钛高炉渣试样中微波场分布不均匀,且分散在炉渣中的钙钛矿相比其他矿物相更易被微波加热.以上 2 因素作用下微波加热高钛高炉渣时局部区域发生热失控现象.     

Evaluation of Two Sets of Sorghum Bagasse Samples as the Feedstock for Fermentable Sugar Recovery via the Calcium Capturing by Carbonation (CaCCO) Process

Abstract: Sorghum bagasse samples from two sets (n6 and bmr6; n18 and bmr18) of wild-type and corresponding “brown midrib” (bmr) mutant strains of sweet sorghum were evaluated as the feedstock for fermentable sugar recovery via the calcium capturing by carbonation (CaCCO) process, which involves Ca(OH)₂ pretreatment of bagasse with subsequent neutralization with CO₂ for enzymatic saccharification. Saccharification tests under various pretreatment conditions of the CaCCO process at different Ca(OH)₂ concentrations, temperatures or residence periods indicated that bmr strains are more sensitive to the pretreatment than their counterparts are. It is expected that variant bmr6 is more suitable for glucose recovery than its wild-type counterpart because of the higher glucan content and better glucose recovery with less severe pretreatment. Meanwhile, bmr18showed higher scores of glucose recovery than its counterpart did, only at low pretreatment severity, and did not yield higher sugar recovery under the more severe conditions. The trend was similar to that of xylose recovery data from the two bmr strains. The advantages of bmr strains were also proven by means of simultaneous saccharification and fermentation of CaCCO-pretreated bagasse samples by pentose-fermenting yeast strain Candida shehatae Cs 4R. The amounts needed for production of 1 L of ethanol from n6, bmr6, n18, and bmr18samples were estimated as 4.11, 3.46, 4.03, and 3.95 kg, respectively. The bmr strains seem to have excellent compatibility with the CaCCO process for ethanol production, and it is expected that integrated research from the feedstock to bioprocess may result in breakthroughs for commercialization.