Deoligomerization of Cyclooligosiloxanes with Dimethyl Carbonate Over Solid-Base Catalysts

Cyclooligosiloxanes, hexamethylcyclotrisiloxane, octamethylcyclotetrasiloxane and decamethylcyclopentasiloxane were efficiently deoligomerized with dimethyl carbonate using an alumina-supported potassium fluoride catalyst under a continuous vapor-phase flow condition to form dimethoxydimethylsilane monomer. In the deoligomerization of larger cyclooligosiloxanes, the catalyst was deactivated. The addition of a small amount of methanol suppressed the deactivation. These results strongly suggest a new method for recycling silicone via monomers.     

Controllable fabrication of carbon aerogels

Nano-pore carbon aerogels were prepared by the sol-gel polymerization of resorcinol (1,3-dihydroxybenzene)(C6H4(OH)2) with formaldehyde (HCHO) in a slightly basic aqueous solution, followed by super-critical drying under liquid carbon dioxide as super-critical media and carbonization at 700 ℃ under N2 gas atmosphere. The key of the work is to fabricate carbon aerogels with controllable nano-pore structure, which means extremely high surface area and sharp pore size distribution. Aiming to investigate the effects of preparation conditions on the gelation process, the bulk density, and the physical and chemical structure of the resultant carbon aerogels, the molar ratio of R/C (resorcinol to catalyst) and the amount of distilled water were varied, consequently two different sets of samples, with series of R/C ratio and RF/W (Resorcinol-Formaldehyde to water, or the content of reactant) ratio, were prepared. The result of N2 adsorption/desorption experiment at 77 K shows that the pore sizes decreasing from 11.4 down tO2.2 nm with the increasing of the molar ratio of R/C from 100 to 400, and/or, the pore sizes decreasing from 3.8 down to 1.6 nm with the increasing of reactant content from 0.4 to 0.6.     

Medulloblastoma originating from the superior cerebellar peduncle: a case report

A rare case of medulloblastoma originating from the superior cerebellar peduncle is reported. After tilting her neck to the right, a 4-year-old girl experienced a left-side hemiparesis for 3 months. Computed tomography (CT) scan and magnetic resonance image (MRI) showed an enhanced mass in the left tentorial incisura. The preoperative diagnosis was trochlear nerve neurinoma or tentorial meningioma, while the postoperative pathological diagnosis was medulloblastoma. Since medulloblastoma is thought to originate from the external granular layer, it is speculated that the external granular layer migrated through the superior cerebellar peduncle and changed to medulloblastoma.     

Thermoelectric properties of the Fe-Al and Fe-Al-Si alloys for thermoelectric generation utilising low-temperature heat sources

The iron is intrinsically a p-type conductor. When aluminum with three valence electrons is added to the iron, the d-subbands are occupied by electrons, so alloying with the aluminum transforms the iron to the n-type conductor, hence the p-n junction is made possible. Furthermore, when silicon is added to the n-type Fe-Al alloy, this alloy returns to the p-type conductor. Therefore, the thermoelectric p-n junctions with high thermoelectric power have been recognised (figures in % refer to mass contents): Fe(p) – Fe12%Al(n): α=38μV/K and Fe12%Al12%Si(p) – Fe12%/Al(n): Δα=70μV/K. Thermoelectric generation offers the possibility of a gigantic electric power generation utilising low-temperature sources of energy below 700 K such as exhaust heat from the central-station steam-electric plant, solar heat and terrestrial heat. The immense production of electricity by this principle is made possible exclusively by means of the conversion materials consisiting of the iron and iron-based alloy because the generator can be manufactured on an efficient mass production basis, and the alloys mentioned above will meet this requirement. In this paper, the thermoelectric properties of these alloys such as Seebeck coefficient, thermal conductivity and electrical resistivity were experimentally determined in the temperature range between 300 and 700 K to provide basic data on the conversion materials with respect to the thermoelectric generation utilising low-temperature heat sources.     

Determination of perfluorocarboxylic acids by gas-liquid chromatography in rat tissues

Gastrin plays an important role in regulating gastric acid secretion and gastrointestinal mucosal growth but its cellular sites of action in man have not been determined. Using cryostat sections of gastric mucosal tissue we have identified (125I-gastrin binding followed by fixation-wet emulsion autoradiography) and characterized (125I-gastrin binding followed by counting) a gastrin receptor binding site in the human stomach. This site displayed binding characteristics similar to those observed in isolated cell systems: specifically, 125I-gastrin binding was rapid (t1/2 approximately 10 min at 37 degrees C), temperature-dependent (3.5 fold more radioligand bound at 22 degrees C than at 4 degrees C) and saturable. The binding of the radioligand was also tissue specific and was five-fold greater in the gastric body than in the gastric antrum and duodenum. In the autoradiographs, silver grains were localized only to parietal cells and not to other epithelial cell types. In the presence of 40 nM gastrin grains were no longer present over parietal cells demonstrating that these sites were both saturable and of high affinity. These data provide the first demonstration of gastrin binding sites (putative receptors) on parietal cells in the human stomach and suggest that gastrin acts directly on these cells to help regulate gastric acid secretion and/or mucosal growth.     

Triterpenoid saponins and sapogenins from Vaccaria segetalis

When two species have predators in common, animals might be able to obtain important information about predation risk from the alarm calls produced by the other species. The behavioural responses of adult yellow-bellied marmots, Marmota flaviventris, and golden-mantled ground squirrels, Spermophilus lateralis, to conspecific and heterospecific alarm calls were studied to determine whether interspecific call recognition occurs in sympatric species that rarely interact. In a crossed design, marmot and squirrel alarm calls were broadcast to individuals of both species, using the song of a sympatric bird as a control. Individuals of both species responded similarly to conspecific and heterospecific anti-predator calls, and distinguished both types of alarms from the bird song. These results indicate that both marmots and squirrels recognized not only their own species' anti-predator vocalizations, but also the alarm calls of another species, and that these vocalizations were discriminated from an equally loud non-threatening sound. These findings suggest that researchers ought to think broadly when considering the sources of information available to animals in their natural environment. Copyright 1998 The Association for the Study of Animal Behaviour Copyright 1998 The Association for the Study of Animal Behaviour.     

Chemical interaction between granular B4C and 304L-type stainless steel materials used in BWRs in Japan

Chemical reactions between stainless steel and boron carbide were investigated using the materials applied for control rods in BWRs in Japan, specifically 304L-type stainless steel and granular boron carbide. The reaction region consisted of 2–4 layers, in which the significant composition variation of each element was detected, especially for B and C. Assuming that the reaction layer growth obeys the parabolic law, the effective rate constant between 304L-type stainless steel and granular boron carbide was evaluated to be approximately one order of magnitude smaller than the previously reported values for boron carbide pellets or powers. This difference might originate from the loose contact between the stainless steel and the granular boron carbide in the present study. Regarding liquefaction progress, the stainless steel components were selectively dissolved in the melt; consequently, the unreacted boron carbide tended to remain.     

Retardation of Crystallization of Diacylglycerol Oils Using Polyglycerol Fatty Acid Esters

Liquid oil containing high concentrations of diacylglycerols (DAG > 80 %, hereafter referred to as DAG-rich oil) is generally more likely to cause precipitation at chilled temperatures (clouding phenomena) than triacylglycerol-based oil. The clouding phenomena that occur during long-term storage of DAG-rich oil are unwanted in consumer products and therefore, must be prevented. In the present study, we attempted to retard precipitation by adding food emulsifiers, polyglycerol fatty acid esters (PGFE) containing different fatty acid moieties. DSC, polarized optical microscopy, and X-ray diffraction studies revealed that the addition of 0.2 % PGFE containing palmitic and oleic acid moieties very effectively retarded precipitation in the DAG-rich oil. To confirm these observations, we prepared a model DAG oil to mimic DAG-rich oil and examined the retardation behavior of high-melting DAG fractions using PGFE. The results are discussed in terms of the effects of PGFE additives on the pre-nucleation processes of high-melting fractions in DAG-rich oil.     

Transition of spherulite morphology in a crystalline/crystalline binary blend of biodegradable microbial polyesters

Crystalline/crystalline binary blend films of microbial polyesters composed of poly[(R)-3-hydroxybutyrate-co-(R)-3hydroxyhexanoate] (P(3HB-co-3HH)) and poly[(R)-3-hydroxybutyrate] (P(3HB)) that exhibit a morphological change are prepared by solvent casting. Differential scanning calorimetry measurements indicate that P(3HB-co-3HH) and P(3HB) are miscible for all blend ratios because a single glass transition temperature is observed. Polarization optical microscopy is used to investigate the transition of spherulite morphology and measure the radial growth rate of spherulites in the blend films. P(3HB-co-3HH) and P(3HB) contain positive spherulites, whereas in the binary blends, spherulite morphology changes from positive to negative. This change is related to the different growth rates of P(3HB-co-3HH) and P(3HB) lamellar crystals. Partial enzymatic degradation of the film surfaces reveals that the lamellar crystals of negative spherulites are oriented both perpendicular and parallel to the radial direction of spherulites. A new growth mechanism for spherulites in crystalline/crystalline blends is constructed from the results obtained for the blend films.     

Inducing Effect of Clofibric Acid on Stearoyl‐CoA Desaturase in Intestinal Mucosa of Rats

Fibrates have been reported to elevate the hepatic proportion of oleic acid (18:1n‐9) through inducing stearoyl‐CoA desaturase (SCD). Despite abundant studies on the regulation of SCD in the liver, little is known about this issue in the small intestine. The present study aimed to investigate the effect of clofibric acid on the fatty acid profile, particularly monounsaturated fatty acids (MUFA), and the SCD expression in intestinal mucosa. Treatment of rats with a diet containing 0.5 % (w/w) clofibric acid for 7 days changed the MUFA profile of total lipids in intestinal mucosa; the proportion of 18:1n‐9 was significantly increased, whereas those of palmitoleic (16:1n‐7) and cis‐vaccenic (18:1n‐7) acids were not changed. Upon the treatment with clofibric acid, SCD was induced and the gene expression of SCD1, SCD2, and fatty acid elongase (Elovl) 6 was up‐regulated, but that of Elovl5 was unaffected. Fat‐free diet feeding for 28 days increased the proportions of 16:1n‐7 and 18:1n‐7, but did not effectively change that of 18:1n‐9, in intestinal mucosa. Fat‐free diet feeding up‐regulated the gene expression of SCD1, but not that of SCD2, Elovl6, or Elovl5. These results indicate that intestinal mucosa significantly changes its MUFA profile in response to challenges by clofibric acid and a fat‐free diet and suggest that up‐regulation of the gene expression of SCD along with Elovl6 is indispensable to elevate the proportion of 18:1n‐9 in intestinal mucosa.