The relationship between acoustic emission signals and cutting phenomena in turning process

The development of intelligent manufacturing by using machine tools is advancing in leaps and bounds. To maintain accuracy in machining and in the interests of fail-safe operation, monitoring of the cutting state or the final machining is very important. Acoustic emissions (AE) comprise elastic stress waves produced as a result of the deformation and fracture of materials. By measuring the AE generated during a turning process, it is possible to estimate the state of the machining operation. The correlation between cutting phenomena and AE in a turning process was examined experimentally by using a steel workpiece and a cermet tool in a numerically controlled turning process. The process of formation of chips, the types of chip, and the shear angle all markedly affected the AE signals. There was a strong negative correlation between the shear angle and the AE signal level. Similar results were obtained for various feed rates and for workpieces of various degrees of hardness. Correlations related to surface roughness and to tool wear are also described that permit the evaluation of the state of the turning process.     

Alteration of substrate specificity of cholesterol oxidase from Streptomyces sp. by site-directed mutagenesis

Despite the structural similarities between cholesterol oxidasefrom Streptomyces and that from Brevibacterium, both enzymesexhibit different characteristics, such as catalytic activity,optimum pH and temperature. In attempts to define the molecularbasis of differences in catalytic activity or stability, substitutionsat six amino acid residues were introduced into cholesteroloxidase using site-directed mutagenesis of its gene. The aminoacid substitutions chosen were based on structural comparisonsof cholesterol oxidases from Streptomyces and Brevibacterium.Seven mutant enzymes were constructed with the following aminoacid substitutions: L117P, L119A, L119F, V145Q, Q286R, P357Nand S379T. All the mutant enzymes exhibited activity with theexception of that with the L117P mutation. The resulting V145Qmutant enzyme has low activities for all substrates examinedand the S379T mutant enzyme showed markedly altered substratespecificity compared with the wild-type enzyme. To evaluatethe role of V145 and S379 residues in the reaction, mutantswith two additional substitutions in V145 and four in S379 wereconstructed. The mutant enzymes created by the replacement ofV145 by Asp and Glu had much lower catalytic efficiency forcholesterol and pregnenolone as substrates than the wild-typeenzyme. From previous studies and this study, the V145 residueseems to be important for the stability and substrate bindingof the cholesterol oxidase. In contrast, the catalytic efficiencies(k_cat/K_m) of the S379T mutant enzyme for cholesterol and pregnenolonewere 1.8- and 6.0-fold higher, respectively, than those of thewild-type enzyme. The enhanced catalytic efficiency of the S379Tmutant enzyme for pregnenolone was due to a slightly high k_catvalue and a low K_m value. These findings will provide severalideas for the design of more powerful enzymes that can be appliedto clinical determination of serum cholesterol levels and assterol probes.     

High-Strength and High-Fracture-Toughness Ceramics in the Al2O3/LaAl11O18 Systems

Control of microstructure in the Al₂O₃/LaAl₁₁O₁₈ system was performed. Elongated alumina grains were formed by doping with small addition of silica, and 20 vol% lanthana- luminate was formed in situ by the reaction of LaAlO₃- A1₂O₃ in an alumina matrix. Strengths of over 600 MPa and a high fracture toughness (6 MPa.m^1/2) were achieved in the material with both elongated A1₂O₃ grains and LaAl₁₁O₁₈ platelets. Generally antagonistic properties such as strength and fracture toughness have been made compatible in the same ceramic system.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Improvement of carrier diffusion length in silicon nanowire arrays using atomic layer deposition

To achieve a high-efficiency silicon nanowire (SiNW) solar cell, surface passivation technique is very important because a SiNW array has a large surface area. We successfully prepared by atomic layer deposition (ALD) high-quality aluminum oxide (Al₂O₃) film for passivation on the whole surface of the SiNW arrays. The minority carrier lifetime of the Al₂O₃-depositedSiNW arrays with bulk silicon substrate was improved to 27 μs at the optimum annealing condition. To remove the effect of bulk silicon, the effective diffusion length of minority carriers in the SiNW array was estimated by simple equations and a device simulator. As a result, it was revealed that the effective diffusion length in the SiNW arrays increased from 3.25 to 13.5 μm by depositing Al₂O₃ and post-annealing at 400°C. This improvement of the diffusion length is very important for application to solar cells, and Al₂O₃ deposited by ALD is a promising passivation material for a structure with high aspect ratio such as SiNW arrays.     

Effects of Annealing on Dielectric Loss and Microstructure of Aluminum Nitride Ceramics

The effect of annealing on tan δ and microstructures of aluminum nitride (AlN) ceramics were explored. Yttria was added as a sintering additive to AlN powders, and the powders were pressureless-sintered at 1900°C for 2 h in a nitrogen flow atmosphere. In succession to sintering, AlN samples were annealed at 720, 970 and 1210°C for 2 and 4 h. Very low tan δ values between 2.6 and 6.0 × 10⁻⁴ at 28 GHz were obtained when the AlN samples were annealed for 4 h at all the annealing temperatures.     

資源環境の保全をめざした二次副産材を導入するコンクリ一ト材料の発展的利用に関する研究

日本では,21世紀半ばに人工の固体物質の代表である解体コンクリート塊の排出量がピークを迎えると同時に,最終処分が困難になる状況が想定されていることから,コンクリート材料の完全資源型の利活用要求はより一層高まるといえる.本研究は,副産微粉,再生骨材などの二次副産材を積極的に混和し,同一産地*種類型の調合条件のもとで,コンクリートの物性改善,資源有効利活用を目的としたコンクリートを製造し,その基礎的物性の評価と環境影響評価を行い,環境保全に資するコンクリート材料の発展的利用のあり方を検討した.     

Study of all-optical clock recovery performance by the primary and the secondary temporal Talbot effects in a second-order dispersive medium

We theoretically and experimentally study the all-optical clock recovery performance using the primary or the secondary temporal Talbot effects (PTTE or STTE, respectively) in a dispersive medium having the first-order dispersion together with the second-order dispersion (e.g., conventional single-mode fibers: SMFs). Our preliminary numerical simulations have indicated that the STTE-based all-optical clock recovery technique can improve double its performance as compared with the conventional PTTE-based technique when the second-order dispersion (dispersion slope) can be neglected. The following simulation results have revealed that the second-order dispersion, that the normal SMFs possess, limits the performance improvements in the STTE-based clock recovery, whereas the limited performance can be improved by appropriately compensating for the second-order dispersion. On the basis of our simulation results, experiments of the STTE-based clock recovery were conducted by compensating for the second-order dispersion of SMFs used as dispersive media. To be specific, SMFs’ second-order dispersion has been reduced to the one-sixteenth of its original value by combining with the reverse-dispersion fibers (RDFs) which can provide the second-order dispersion of the opposite sign to the SMFs. As a result, the performance improvements in the STTE-based clock recovery was demonstrated so that the 10-GHz clear optical clock pulses were successfully recovered from 10-Gbit/s return-to-zero (RZ) pseudo-random bit sequence (PRBS) optical signals.     

Application of nonlinear fitting and selection of the most fitted equation by AIC in stability test of pharmaceutical ingredients

We proposed a method for objectively selecting the most fitted rate equation among candidate rate equations based on chemical kinetics by both nonlinear regression analysis and Akaike's information criterion (AIC), to express the decrease of pharmaceutical ingredient as an appropriate equation. Pseudo-zero, first, and second-order rate equations were prepared as candidates beforehand, and AIC was introduced for selecting the most fitted rate equation among the candidates. We compared the proposed method to the Weibull method that expressed any decrease patterns as a single equation.

We quantified the contents of thiamine nitrate (VB1) and taurine after storage for one, three, and six months under 40°C-75% relative humidity by high-pressure liquid chromatography. Decrease patterns of each sample were most fitted to one of the candidate rate equations, that is, pseudo-zero, first, and second-order rate equations, respectively, and the degree of fit in the most fitted equation was superior to that of the Weibull method, except for the pseudo-first-order rate equation.

Moreover, we confirmed that the proposed method was considerably precise for estimating the stability of pharmaceuticals by comparing estimated residual rates and confidence intervals to experimental data.     

Pen-to-mime: Pen-based interactive control of a human figure

In this paper a pen-based intuitive interface is presented, that controls a virtual human figure interactively. Recent commercial pen devices can detect not only the pen positions but also the pressure and tilt of the pen. We utilize such information to make a human figure perform various types of motions in response to the pen movements manipulated by the user. The figure walks, runs, turns and steps along the trajectory and speed of the pen. The figure also bends, stretches and tilts in response to the tilt of the pen. Moreover, it ducks and jumps in response to the pen pressure. Using our interface, the user controls a virtual human figure intuitively as if he or she were holding a virtual puppet and playing with it.

In addition to the interface design and implementation, this paper describes a motion generation engine to produce various motion based on varying parameters that are given by the pen interface. We take a motion blending approach and construct motion blending modules with a set of small number of motion capture data for each type of motions. Finally, we present the results from user experiments and comparison with a transitional gamepad-based interface.