Difference of histology and elemental composition of the cervical enamels among human permanent teeth

The purpose of this study is to clarify the difference of histology and elemental composition of the cervical enamels among the human permanent teeth. The reground surfaces at the cervical enamels of them were observed under scanning electron microscopy (SEM). The contents of seven elements were analyzed quantitatively with electron probe microanalyzer (EPMA). The widths of the rod sections at the cervical enamels were larger than those at the cuspal enamels. The rod sections at the mesial cervical enamels in the incisors were more obscure and more decayed by acid solution than those in the premolars and molars. The calcium and phosphorus contents of the cervical enamels were significantly lower than those of the cuspal enamels. The carbon content of the cervical enamels was significantly higher than that of the cuspal enamels. The calcium and phosphorus contents of the cervical enamels were the significantly highest in the premolars. The carbon and sodium contents of the cervical enamels were significantly highest in the premolars. It is thought that the calcification level is lower, while the content of organic matter is higher at the cervical enamels than those at the cuspal enamels. It is considered that the sodium causes high calcification.     

Methane Oxidation on Perovskite-Type Ca(Mn1−xTix)O3−δ

X-ray photoelectron spectroscopy was performed to elucidate the catalytic activity of CH₄ oxidation on perovskite-type Ca(Mn_{1− x} Ti _x )O_3−δ synthesized at 1173 K in a flow of oxygen from a gel with citric acid and ethylene glycol. The Mn ion content decreases and the ratio of the Mn³⁺ ion in the Mn ion increases with increases in x . Ca(Mn_{1− x} Ti _x )O_3−δ has a high catalytic activity of CH₄ oxidation at x =0.4. These results indicate that the catalytic activity strongly depends on the Mn³⁺ ion content of the surface.     

Identification of Sex Pheromones of Anadevidia peponis and Macdunnoughia confusa and Field Tests of Their Role in Reproductive Isolation of Closely Related Plusiinae Moths

Anadevidia peponis and Macdunnoughia confusa are defoliators of plants in the family Cucurbitaceae and Compositae, respectively, in Japan. GC-MS analyses of crude pheromone gland extracts treated with or without dimethyl disulfide indicated that females of A. peponis produced six monoene acetates and two monoene alcohols and that M. confusa females produced five monoene acetates. These components include (Z)-7-dodecenyl acetate as a major common constituent and three other acetates as minor common constituents. The minor constituents are quite different in blend composition. In addition, with (Z)-7-dodecenyl acetate, an indispensable component for male attraction is (Z)-5-decenyl acetate for A. peponis and (Z)-9-tetradecenyl acetate is essential for M. confusa. Field tests with synthetic lures showed synergistic effects of some other minor components and male attraction of three additional Plusiinae species, Macdunnoughia purissima, Ctenoplusia albostriata, and Chrysodeixis eriosoma, suggesting their reproductive isolation is based in part on pheromonal communication.     

An outcome of nuclear safety research in JAERI: case study for LOCA

An outcome of nuclear safety research (NSR) done by JAERI (Japan Atomic Energy Research Institute) was case studied by the bibliometric method. (1) For LOCA (loss-of-coolant accident) a domestic share of JAERI in monoclinic research paper was 63% at the past (20) 1978–1982 but was decreased to 40% at the present 1998–2002. For co-authored papers a domestic share between JAERI and PS (public sectors) was zero at past (20) but increased to 4% at the present. Research cooperation is active between Tokyo University and JAERI or between JAERI and Nagoya University. (2) It is revealed that LOCA outputs born by NSR-JAERI reflected partly to those of the Safety Licensing Guidelines, however, a share of NSR-JAERI could not determined due to the lack of necessary information in the Guideline.     

Lightning occurrence data observed with lightning location systems of electric power companies in Japan: 2009–2013

Nine electric power companies in Japan have been collecting lightning data with lightning location systems. Five years of the lightning data (2009–2013) are summarized and analyzed in this paper. The recent annual number of lightning flashes of which the current is more than 10 kA in Japan is around 1 million. The variations of lightning occurrence characteristics by areas, seasons, and so on, are clarified. Meteorological conditions that may affect lightning occurrence are also discussed. Furthermore, we show that there is a clear correlation between the number of lightning strikes and the outage rate of transmission lines. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Exposure and risk assessment of zinc in Japanese surface waters

In recent years, due to concerns on the potential effects of zinc on aquatic biota, zinc is receiving particular attention from regulatory agencies. A comprehensive exposure and risk assessment of zinc in Japanese surface waters was conducted to provide a scientific basis for developing realistic risk reduction measures for zinc. Emissions from corrosion contribute approximately 37% of the total zinc emissions to surface water in Japan. The zinc concentration distributions estimated using 12 years of monitoring data from 2075 sites by a maximum likelihood method indicated that the mean concentrations have gradually declined. The threshold concentrations (HC5 and PHC5) derived from organism- and population-level species sensitivity distributions were estimated to be 27 and 107 μg/L for total zinc, respectively. The risk characterization identified that during 1991-2002, 14.5-26.8% of the monitoring sites likely exceeded the HC5, whereas only 0.7-3.5% likely exceeded the PHC5. Evaluation of the effect of stormwater runoff to zinc concentrations in a river showed that zinc concentrations in river water increased significantly from roadway drainage flowing into the river. The cost-effectiveness analyses demonstrated that enforcement of the zinc national effluent standard may be effective at a certain level for public water areas in Japan; however, the degree of the effectiveness is highly dependent on the characteristics (e.g., sources and background) of the watersheds. An emissions and exposure assessment along with cost-effectiveness analysis is crucial for developing realistic and appropriate ecological risk management of zinc. The zinc RAD in Japan illustrated that in any “state-of-the science” method used, some degree of ecological risk from zinc can be observed in some Japanese water environments. On the other hand, zinc is a beneficial material for human industrial activities. Because zinc is an element, its role in industrial activities would be difficult to be substituted by other metals with less toxicity. In addition to improving science-based risk assessment methodologies which often focus on the toxicological perspectives, it is important to develop a more robust framework considering a trade-off between a damage in ecosystem and a benefit in human activities. Zinc can be a role model for it.     

Nanoparticle formation in H2O/N2 and H2O/Ar mixtures under irradiation by 20 MeV protons and positive corona discharge

To investigate the contribution of ions to gas nucleation, we have performed experiments on the formation of water droplets in H₂O/N₂ and H₂O/Ar gas mixtures by irradiation with a 20 MeV proton beam and by positive corona discharge. The size of the formed nanoparticles was measured using a differential mobility analyzer equipped with a Faraday cup electrometer. Using the proton beam, droplets around 10 nm in diameter were observed for both positively and negatively charged particles, but none were found when the corona discharge was used. This implies the importance of the presence of both positive and negative ions for the formation of nanosize droplets, which attract each other by Coulomb interactions, enhancing the collision frequency and leading to the formation of the 10 nm droplets.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Proton-conducting electrolyte membranes based on hyperbranched polymer with a sulfonic acid group for high-temperature fuel cells

The hyperbranched polymers (HBP-SA-Acs) with both a sulfonic acid group as a functional group and an acryloyl group as a cross-linker at terminals in different ratios of sulfonic acid group/acryloyl group (SO₃H/Ac) were successfully synthesized as a new thermally stable proton-conducting electrolyte. The cross-linked hyperbranched polymer electrolyte membranes (CL-HBP-SAs) were prepared by thermal polymerizations of the HBP-SA-Acs using benzoyl peroxide, and their ionic conductivities under dry condition and thermal properties were investigated. The ionic conductivities of the CL-HBP-SAs were found to be in the range of 2.2 × 10⁻⁴ to 3.3 × 10⁻⁶ S/cm, depending upon the SO₃H unit contents, at 150 °C under dry condition, and showed the Vogel-Tamman-Fulcher (VTF) type temperature dependence, indicating that proton transfer is cooperated by local polymer chain motion. All CL-HBP-SAs were thermally stable up to 260 °C, and they had suitable thermal stability as electrolyte membranes for the high-temperature fuel cells under dry condition. Fuel cell measurement using a single membrane electrode assembly cell with a cross-linked electrolyte membrane was successfully performed under non-humidified condition. It was demonstrated that applying the concept of dry polymer system to proton conduction is one possible approach toward high-temperature fuel cells.     

Effect of Surface Treatment on the Selective Photocatalytic Oxidation of Benzyl Alcohol into Benzaldehyde by O2 on TiO2 Under Visible Light

The photocatalytic oxidation of benzyl alcohol into benzaldehyde proceeded with high conversion and selectivity on a TiO₂ photocatalyst by O₂ under visible light irradiation. Surface complex formed by the interaction of benzyl alcohol with the Ti sites and/or surface OH groups of TiO₂ play an important role in the absorption of visible light and unique selective photocatalytic reaction.