Bioconversion of n−3 and n−6 PUFA by <Emphasis Type="Italic">Clavibacter</Emphasis> sp. ALA2

Clavibacter sp. ALA2 oxidized n−3 and n−6 PUFA into a variety of oxylipins. Structures of products converted from EPA and DHA were determined as 15,18-dihydroxy-14,17-epoxy-5(Z),8(Z),11(Z)-eicosatrienoic acid and 17,20-dihydroxy-16,19-epoxy-4(Z),7(Z),10(Z),13(Z)-docosatetraenoic acid by GC-MS and NMR analyses. In contrast, γ-linolenic acid and arachidonic acid were converted to diepoxy bicyclic FA, tetrahydrofuranyl monohydroxy FA, and trihydroxy FA. Thus, the structures of bioconversion products were different between n−3 and n−6 PUFA. Furthermore, strain ALA2 placed hydroxy groups and cyclic structures at the same position from the ω-terminal despite the number of carbons in the chain and the double bonds in the PUFA.     

Scanning electron microscopy of food-poisoning bacterium Bacillus cereus using a variable-pressure SEM

A variable-pressure scanning electron microscopy (VP-SEM) with a cooling stage permits long hours of observation of water-containing specimens in their natural or close to natural state, without the conventional specimen preparations of fixation, dehydration, drying and metal coating. It reduces water vaporization and beam damage by keeping the specimens at a low temperature. We observed Bacillus cereus colonies on nutrient agar, which would shrink significantly if any conventional specimen preparation technique were used. We also studied the growing process of the bacteria on raw and steamed rice using the VP-SEM without conventional preparation techniques. Original specimens were directly mounted onto specimen holders and their backscattered electron images observed under the following conditions: specimen stage temperature, -10 degrees C; specimen chamber vacuum level, 30-70 Pa; and accelerating voltage, 15-20 kV. We recognized that the VP-SEM minimized deformation of the colonies due to shrinkage of the nutrient agar, and successfully imaged the morphology of the colonies and bacteria without a decline in bacteria number, which is apt to occur during fixation and dehydration. Also, the growth process of the bacteria on raw or steamed rice could be observed promptly, since there is no specimen preparation step.     

Compact optical-fiber variable attenuator arrays with polymer-network liquid crystals

Electrically controlled fiber variable-optical-attenuator arrays with polymer-network liquid crystals are shown to be compact and to have a large attenuation range (30-40 dB) and low residual loss (0.55 dB) at wavelengths from 1.3 to 1.6 mum. Their estimated power consumption is very low (<30 nW/channel), and arrays with more than ten channels can be made. The manufacturing process is simple: Trenches 30-100 mum wide are cut across parallel conductive-layer-coated optical fibers and are filled with a polymer-network liquid crystal. The attenuation properties depend on UV-curing conditions and on trench width.     

Structure and Bonding in Some Gd（Ⅲ） Metal Complexes Studied by Three-Dimensional X-Ray Analysis and ^155Gd Mossbauer Spectroscopy

Some functional lanthanide metal complexes, such as acetylacetonato complexes, ethylenediaminetetraacetato complexes, were successfully applied for diagnostic technique. The authors are interested in investigating the structure and bonding in lanthanide and actinide metal complexes using 166Er, t55Gd, and 237Np Mtissbauer spectroscopies in connection with single-crystal and/or powder X-ray diffraction, making clear the differences on their structures as well as the differences in the participation of 4f and 5f orbitals in the chemical bonds. In this article, the crystal structures of two novel Gd（Ⅲ） acetylacetonato complexes, Gd（pta）3 · 2H2O （pta = 1,1,1 -trifluoro-5,5-dimethy 1-2,4-hexanedione） and Gd（bfa）3 · 2H2O （bfa = 1, 1, 1 -trifluoro-4-phenyl-2-4-butanedione） were reported. Though both of them were dihydrate and had distorted square antiprismatical structure, Gd（pta）3 · 2H2O crystallizes in the P 2 1/n （#14） monoclinic space group and its lattice parameters are a = 1.4141（6） nm, b = 1.0708（3） nm, c =2.2344（4） nm, β =952.4（2）°, and Gd（bfa）3· 2H2O crystallizes in P 212121 orthorhombic space group and its lattice parameters were a = 1.322 （1） nm, b = 2.295 （1） nm, c = 1. 0786（8） nm. In the meantime, the authors had finished a systematic investigation on the ^155Gd Mossbauer isomer shift （δ） of various Gd（Ⅲ） metal complexes having a different coordination number （C.N.） and different ratios coordinating oxygen to nitrogen. A tendency for the 6 value to decrease with an increase in the C.N, and the number of the nitrogen atom coordinating to Gd was confirmed. This indicated that the Gd-O and/or Gd-N bond in the investigated Gd（Ⅲ） metal complexes had a small covalent contribution, which was possible to be deduced from the O and/or N atoms of the lisands donating electrons to 6s, 5d, and 4f orbitals of Gd.     

自组织InAs/GaAs量子点的表面氮化研究

用低温光荧光(PL)和透射电子显微镜(TEM)研究了表面氮化自组织InAs/GaAs量子点的光学性能和微观结构。结果表明氮化后形成薄层的InAsN薄膜作为应变缓和层覆盖在量子点的表面,使得随着氮化时间的增加,InAs量子点的位错密度提高、尺寸变大、纵横比提高、发光波长变长、强度变低。     

Possible 3He Boltzmann Gas Formed on Three-Dimensional Nanopores Preplated with 4He

We have measured the heat capacity of ³He adsorbed on three-dimensionally connected nanopores, 2.7 nm in diameter, preplated with about 1.3 atomic layers of ⁴He. At low coverages of ³He, the ³He heat capacity is roughly constant at the measured temperatures between 0.1 and 1 K. Its molar heat capacity is on the order of the gas constant R, between 1.1R and 1.8R. This suggests a Boltzmann gas state of the adsorbed ³He. At high coverages, the heat capacity is likely approaching linear in T at low temperatures, which suggests a degenerate state at further lower temperatures.     

Gold nanoparticle distribution monitor for drug delivery system based on optically assisted ultrasonic velocity-change imaging

Optical absorption images of the tissue mimic phantom including gold nanoparticles were obtained by detecting the ultrasonic velocity-change caused by light irradiation. A series of experimental results showed the possibility as a nanoparticle distribution monitor for the drug delivery system.     

Real-time exploration of a multi-robot rescue system in disaster areas

A system procedure is proposed for a multi-robot rescue system that performs real-time exploration over disaster areas. Real-time exploration means that every robot exploring the area always has a communication path to human operators standing by at a base station and that the communication path is configured by ad hoc wireless networking. Real-time exploration is essential in multi-robot systems for USAR (urban search and rescue) because operators must communicate with every robot to support the victim detection process and ad hoc networking is suitable to configure a communication path among obstacles. The proposed system procedure consists of the autonomous classification of robots into search and relay types and behavior algorithms for each class of robot. Search robots explore the areas and relay robots act as relay terminals between search robots and the base station. The rule of the classification and the behavior algorithm refer to the forwarding table of each robot constructed for ad hoc networking. The table construction is based on DSDV (destination-sequenced distance vector) routing that informs each robot of its topological position in the network and other essentials. Computer simulations are executed with a specific exploration strategy of search robots. The results show that a multi-robot rescue system can perform real-time exploration with the proposed system procedure and reduce exploration time in comparison with the case where the proposed scheme is not adopted.     

Stochastic ellipsoid methods for robust control: Multiple updates and multiple cuts

Efficient randomized algorithms are developed for solving robust feasibility problems with multiple parameter-dependent convex constraints. Two complementary strategies are presented, both of which exploit the multiplicity to achieve fast convergence. One is the stochastic ellipsoid method with multiple updates. In each iteration of this algorithm, an ellipsoid which describes a candidate of the solution set is updated many times via the multiple constraints with one random sample, while at most one update is allowed in the original method. The other is the stochastic ellipsoid method with multiple cuts. Here, a new update rule is presented to construct a smaller ellipsoid directly via multiple subgradients given by the constraints. A quantitative analysis of the volume of the ellipsoid is also provided, which guarantees the advantage of the proposed algorithm over the original one. The above features lead to a reduction of the total number of random samples necessary for convergence, which is extensively demonstrated through numerical examples.