Secondary electron emission and surface charging evaluation of alumina ceramics and sapphire

The breakdown of alumina rf windows is mostly caused by multipactor, as well as by material defects and contamination. Since multipator induces localized surface heating, leading to surface melting, it is necessary to observe secondary electron emission (SEE) coefficients of alumina ceramics under high temperature conditions. The SEE coefficients of commercial alumina ceramics and sapphire were measured by a scanning electron microscopy (SEM) with a single short-pulsed electron beam (100 pA, 1 ms) at room temperature and at 650degC. Additive materials used for sintering alumina, such as SiO ₂ and MgO, were also investigated. Surface charging evaluations have also become important because the accumulated charges are discharged at the threshold Held, resulting in surface discharge. The surface charging evaluations were carried out by multi-pulse measurements with the injection of successive pulses on the sample. As a result, reductions in the SEE coefficients with temperature were confirmed, except for sapphire. The multi-pulse measurement results indicated that surface charging of the sapphire was higher than that of other samples. This may be one of the factors that causes sapphire not to be durable for rf window applications, compared with alumina ceramics. Although there are few exceptions, it was found that the SEE coefficients of alumina ceramics increased with the purity and the average grain size     

A simple adaptive PI controller for linear systems with constantdisturbances

It is known that an adaptive controller via high-gain output feedback can globally stabilize a class of minimum phase systems with relative degree one. However, exact output regulation is difficult for systems with disturbances. In this paper, we consider linear single-input/single-output (SISO) systems with unknown constant disturbances. We present a simple adaptive output feedback controller with an integral action and show that it can asymptotically stabilize those disturbed systems. The proposed PI type adaptive controller can also deal with the output tracking problem of a step reference     

Molecular pharmacology of voltage-dependent calcium channels

Voltage-dependent Ca2+ channels serve as the only link to transduce membrane depolarization into cellular Ca(2+)-dependent reactions. A wide variety of chemical substances that have the ability to modulate Ca2+ channels have been demonstrated both for their clinic utility and for importance in elucidating the molecular basis of various biological responses. Recently, introduction of molecular biology to pharmacology has brought a great deal of information about the molecular basis of drug action in Ca2+ channels. In this review, we attempt to overview recent progress in understanding the interactions between Ca2+ channels and their blockers, namely Ca2+ antagonists, from a molecular and structural point of view.     

Global adaptive stabilization of infinite-dimensional systems

The purpose of this paper is to show that a first-order adaptive regulator globally stabilizes a class of infinite-dimensional systems having no right half plane zeros. Knowledge of the spectrum of the model's high-frequency gain is not required.     

Error grid analysis of noninvasive glucose monitoring via gingival crevicular fluid.

In order to realize a noninvasive blood glucose monitor, we monitored the gingival crevicular fluid (GCF). In this paper, the clinical evaluations were performed on not only normal subjects but also diabetic subjects using a GCF-glucose monitor to determine blood glucose levels. Meal load tests were carried out and the time-course changes in blood glucose level and GCF glucose level were measured continuously. A positive correlation of more than 0.9 was found between blood glucose level and GCF glucose level, necessitating the calibration of individual correlations for every subject. Finally, the performance of the GCF-glucose monitor was evaluated using Error Grid Analysis. As the results, significant information for the glucose level decision was obtained not only for normal subjects, but also for diabetic subjects.     

Cluster Properties Investigated From a Series of Ultrawideband Double Directional Propagation Measurements in Home Environments

Results from double directional ultrawideband (UWB) channel sounding in a wooden house are described. The double directional channel sounder estimates directional information at both ends of the link, so that we can separate antenna directivity from the channel sounding results. We investigated the dominant propagation mechanisms by introducing cluster analyses. The detected propagation paths from the channel sounding were first classified into clusters in the angular-delay domain, and then properties of the clusters such as standard deviation of path positions, dynamic range of path power, and power distribution of clusters were derived. From the results, we discussed the similarities and differences between the measurement environment and the physical propagation phenomena. Finally, different types of scattering losses of the propagation paths were derived and modeled. The results from sounding and analysis contribute in the development of UWB propagation models and can be used in UWB propagation simulations     

Dielectric spectroscopy of metal nanoparticle doped liquid crystal displays exhibiting frequency modulation response

Twisted nematic liquid crystal displays (TN-LCDs), doped with the nanoparticles of metal, such as Pd, Ag, or Ag-Pd, which are protected with ligand molecules, such as nematic liquid crystal, exhibit a frequency modulation (FM) electro-optical (EO) response with short response time of milliseconds (ms) or sub-ms order together with the ordinary rms voltage response. These devices are called FM/AM-TN-LCDs; they are distinct from the ordinary LCDs featured by the amplitude modulation (AM) response. The phenomena of the FM/AM LCDs may be attributed to the dielectric dispersion of a heterogeneous dielectric medium known as the Maxwell-Wagner effect. It is experimentally shown that the frequency range spreads from several tens hertz to several tens kilohertz and the spectrum is more or less centered about the dielectric relaxation frequency. We formulated a theory based on an equivalent circuit model to evaluate the dielectric relaxation frequency and the dielectric strengths; and we succeeded in explaining the dependence of the dielectric relaxation frequency on the concentration of nanoparticles and the their dielectric and electrical properties, whereas conventional theories based on electromagnetic theory are unable to explain this concentration dependence. This paper reports on the experimental results of the EO effects and the dielectric spectroscopy including the dielectric relaxation times and the dielectric strengths of nematic liquid crystal, 5CB (4-pentyl-4'-cyanobiphenyl), doped with the metal nanoparticles of I'd alone and Ag-Pd composite; and discusses how the observed dielectric relaxation frequency or dielectric relaxation time depend on the concentration of the doped nanoparticles and also their electrical and dielectric properties.     

Monolithically integrated 780-nm-band high-power and 650-nm-bandlaser diodes with real refractive index guided self-aligned structure

780-nm-band high-power and 650-nm-band laser diodes (LDs) with real refractive index guided self-aligned (RISA) structures are monolithically integrated for the first time. High-power and fundamental transverse mode operation at an output power of 100-mW continuous wave (CW) up to 80°C is attained for the 780-nm-band LD. For the 650-nm-band LD, high temperature and fundamental transverse mode operation at an output power of 10-mW CW up to 80°C is obtained     

Electron microscopic visualization of collagen aggregates without chemical staining.

Lateral, uni-directional aggregates of collagen, segment-long-spacing crystallites (SLS), were made by dialyzing collagen solutions against acetic acid containing ATP, and were examined by transmission electron microscopes without electron staining. There detected were at least 20 dark (electron dense) cross-striations within SLS. The banding pattern was compared with the biochemical and biophysical properties of the amino acid side chains along the collagen molecule. The banding pattern of unstained SLS was mostly correlated with the intramolecular distribution of basic amino acid residues. Since basic amino acids have relatively large side chains, the distribution of mass (molecular weight of amino acids) along the molecule (local density profile) partially explained the cross-striation. Addition of fractions of molecular weight of ATP to basic residues made the local density profile much better correlate to the banding pattern. We conclude that the electron microscopic banding pattern of unstained SLS was generated by the local amount of material or local density profile along the collagen aggregates, which was enhanced by ATP bound to positively charged basic residues. The concept that the electron density correlates with the amount of material is fundamental in electron microscopy, and it has been proven with biological materials in this paper.     

CMOS-compatible lateral bipolar transistor for BiCMOS technology.II. Experimental results

For Pt.I see ibid., vol.39, no.4, p.948-51 (1992). Characteristics of a CMOS-compatible lateral bipolar transistor suitable for low-cost and high-speed BiCMOS LSIs are described. The proposed transistor has a structure analogous to that of the NMOS transistor, which employs a source and drain self-aligned structure to form an emitter and collector. The obtained values of h_FE, BV_CEO, R _CS, f_Tmax, and r_bb', are 20, 7 V, 50 Ω, 6.3 GHz, and 450 Ω, respectively. Moreover, delay times of a two-input NAND BiCMOS gate circuit are 0.28 ns when unloaded, and 0.42 and 0.53 ns when load capacitances are 1 and 2 pF, respectively. These values are comparable to those for BiCMOS circuits using the conventional vertical bipolar transistors