Highly reliable a‐IGZO TFTs on a plastic substrate for flexible AMOLED displays

We have successfully reduced threshold voltage shifts of amorphous In–Ga–Zn–O thin‐film transistors (a‐IGZO TFTs) on transparent polyimide films against bias‐temperature stress below 100 mV, which is equivalent to those on glass substrates. This high reliability was achieved by dense IGZO thin films and annealing temperature below 300 °C. We have reduced bulk defects of IGZO thin films and interface defects between gate insulator and IGZO thin film by optimizing deposition conditions of IGZO thin films and annealing conditions. Furthermore, a 3.0‐in. flexible active‐matrix organic light‐emitting diode was demonstrated with the highly reliable a‐IGZO TFT backplane on polyimide film. The polyimide film coating process is compatible with mass‐production lines. We believe that flexible organic light‐emitting diode displays can be mass produced using a‐IGZO TFT backplane on polyimide films.     

Pseudo-binary system Bi2O3-TeO2 in air

The phase equilibria in the pseudo-binary system Bi₂O₃-TeO₂ at 600° 950° C in air were examined by solid-state reaction techniques and X-ray powder diffraction method. Four pseudo-binary compounds appeared, i.e., -Bi₂O₃ type solid solution having a compositional range of (1-x)Bi₂O₃·xTeO₂ wherex=0 0.4 a new compound Bi₆Te₂O₁₅ which has an orthorhombic cell of a=2.27(4) nm, b=1.06(1) nm and c = 0.539(8) nm, 2Bi₂O₃ · 3TeO₂, and an unidentified phase Bi₂O₃·2TeO₂. The formation of the phase Bi₆Te₂O₁₅, in which all the Te ions are hexavalent, was confirmed by the thermogravimetry and by the Mössbauer spectra. The liquidus curves for whole system were determined by DTA method.     

Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge

For a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge, the relationship between the corrosion rate of the bridge and the composition of the rust layers formed on the girders was first investigated. These corrosion rates were clearly classified by the protective ability index (PAI) of α/γ^∗ and (β + s)/γ^∗, where α, γ^∗, β and s are the mass ratio of crystalline α-FeOOH, the total of γ-FeOOH, β-FeOOH and the spinel-type iron oxide (mainly Fe₃O₄), β-FeOOH and spinel-type iron oxide, analyzed by XRD, respectively. The inequality of the former index α/γ^∗ > 1 expressed the protectiveness criterion of the rust layer, while that of the latter index, (β + s)/γ^∗< 0.5 or > 0.5, classified the corrosion rate of the non-protective rust layer. The PAI is useful for a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge and is an important item for the corrosion assessment of the bridge.     

In Situ Observation of Phase Separation of a Barium Borate Melt in a Stable Immiscibility Region under Microgravity

The precipitation of droplets was directly observed on a BaO–B₂O₃ melt in a drop shaft experiment. This is the first time that precipitation of droplets has been observed in a 4.5 s drop test. The melt film of 4BaOz96B₂O₃ (mol%) held on a platinum wire loop was heated above the critical tem-perature to produce uniformity and was cooled down to the phase separation temperature range. Phase separation of the melt was observed directly with a video camera. The IR image of the melt was simultaneously detected with a CCD array and was converted into a two-dimensional thermograph.     

Cationic ring-opening polymerization of 2-phenyl-1,2-oxaphospholane (deoxophostone)

Summary The ring-opening polymerization of deoxophostone 5, a five-membered cyclic phosphinite, has been studied. Some cationic initiators gave polymer whereas anionic and radical initiators as well as metal chloride (Lewis acid) catalysts did not yield polymer. The polymer consisted of a phosphine oxide repeating unit 6. The polymerization proceeded via the Arbuzov-type reaction. The reduction of polymer 6 with a HSiCl₃/Et₃N system gave polyphosphine 7.     

Infiltration and Top Seed Growth-Textured YBCO Bulks With Multiple Holes

The recently reported hole-patterned YBa₂Cu₃O _y (Y123) bulks with improved superconducting properties are highly interesting from material quality and application variety points of view. It is well known that the core of plain bulk superconductors needs to be fully oxygenated and some defects like cracks, pores, and voids must be suppressed in order that the material can trap a high magnetic field or carry a high current density. To minimize the above defects, we have used a combination of standard superconducting ceramic processing and an infiltration technique to prepare regularly perforated YBa₂Cu₃O _y (Y123) bulk superconductors. This process leads to negligible shrinkage upon annealing and a uniform distribution of Y211 inclusions. Texture was evidenced by neutron pole figure measurements. Flux mapping was used to verify the superconducting homogeneity of the samples and to investigate the field-trapping ability. In addition, the textured drilled samples were reinforced using resin or metal impregnation and the influence of the different processing steps on the hardness of the materials has been investigated.     

New ring-opening polymerization via a π-allylpalladium complex

Summary A binary system of a palladium complex as catalyst and zinc alkoxide as initiator conducted a novel ring-opening polymerization of cyclic carbonate, i. e., 5,5-dimethyl-4-ethenyl-1,3-dioxan-2-one. The polymerization proceeded along with releasing carbon dioxide to produce the corresponding polyether. The -allylpalladium complex generated from the monomer with the catalyst is the key intermediate for this new polymerization. The propagating end is zinc alkoxide, which nucleophilically attacks the monomer activated as the -allylpalladium complex in the propagation.     

Copolymerization of methylmethacrylate on a ball-milled surface of coal at 77 K

The ball-milling of coal with methylmethacrylate monomer was carried out under vacuum at 77 K and at room temperature and in air. The e.s.r. and i.r. spectra of ball-milled material showed that a copolymer of coal and methylmethacrylate was formed on the surfaces of coal created by ball-mining. Oxygen is an inhibitor to this process.     

Synthesis of Metastable Tetragonal (t') Zirconia–Ceria Solid Solutions by the Polymerized Complex Method

Homogeneous metastable tetragonal ( t ') solid solutions of ZrO₂— x mol% CeO₂ ( x = 20 and 50) were successfully synthesized by the organic polymerized complex method. The citric acid-ethylene glycol solution containing Zr and Ce ions was polymerized at about 140°C and then heat-treated at about 350°C to obtain a precursor. The black precursor was heated at 450°C and then fired up to 1300° or 1590°C, resulting in the homogeneous solid solutions.     

E.s.r. study of annealing and melting effects on the molecular motion of spin trapped chain-end radicals located on the polyethylene surface

E.s.r. spectra of chain-end spin labels on the surface of polyethylene powder were obtained for high and low density polyethylene samples at various stages of heat treatment process. The subsequent crystalline structures of the samples were examined with wide angle and small angle X-ray diffraction spectra. The effects of annealing on the motion of the labels were dependent on annealing temperature and the type of the samples. Higher temperature annealing decreased the rotational correlation times (τ_c) and their activation energy in high density polyethylene but did not affect those of low density polyethylene. Melting decreases the values of τ_c and ΔE for both high an low density polyethylene samples. The cause of these decreases were attributed to the changing of the sites of the chain-end labels. The motion of the labels appeared to be influenced by the local segmental motion of the polymer main chains.