Effects of uni-axial mechanical stress on IGBT characteristics

This paper describes the impacts of mechanical stress on vertical power devices. The stress dependence of the DC characteristics of trench insulated gate bipolar transistors (IGBTs) was measured. The experimental results could be reproduced by the device simulation, which included stress dependence models of the carrier mobility and the band gap. We found that the stress dependence of the on-state voltage mainly arose from the MOSFET portion of the IGBT. Using the device simulation, we estimated the effects of mechanical stress on the surge voltage and the saturation current, which give us the important information for designing a power module with higher ruggedness.     

Wavelength-independent operation of EA-modulator integratedwavelengthselectable microarray light sources

In this letter, we have simultaneously fabricated five wavelength-selectable microarray light sources (WSLs), each having a different wavelength range integrated with an electroabsorption (EA) modulator on a single wafer. We also introduced a novel device configuration scheme for wavelength-independent modulation. The five EA-WSLs fully covered the entire C-band and had a low uniform threshold current of 6 ± 1 mA at 25°C. Wavelength-independent extinction characteristics were obtained over a tuning wavelength range of 8 nm, and 2.5-Gb/s transmission over 600 km was successfully achieved     

A QoS-aware routing mechanism for multi-channel multi-interface ad-hoc networks

To accommodate real-time multimedia application while satisfying application QoS requirements in a wireless ad-hoc network, we need QoS control mechanisms. In this paper, we propose a new routing mechanism to support real-time multimedia communication by efficiently utilize the limited wireless network capacity. Our mechanism considers a wireless ad-hoc network composed of nodes equipped with multiple network interfaces to each of which a different wireless channel can be assigned. By embedding information about channel usage in control messages of OLSRv2, each node obtains a view of topology and bandwidth information of the whole network. Based on the obtained information, a source node determines a logical path with the maximum available bandwidth to satisfy application QoS requirements. Through simulation experiments, we confirmed that our proposal effectively routed multimedia packets over a logical path avoiding congested links. As a result, the load on a network is well distributed and the network can accommodate more sessions than QOLSR. We also conducted practical experiments using wireless ad-hoc relay nodes with four network interfaces and verified the practicality of our proposal.     

Colossal Barocaloric Effect by Large Latent Heat Produced by First-Order Intersite-Charge-Transfer Transition

Materials which show novel thermal properties can be used to make highly efficient and environmentally friendly energy systems for thermal energy storage and refrigeration through caloric effects. An A-site-ordered quadruple perovskite-structure oxide, NdCu₃Fe₄O₁₂, is found to release significant latent heat, 25.5 kJ kg⁻¹ (157 J cc⁻¹), at the intersite-charge-transfer transition temperature near room temperature. The transition is first-order and accompanied by an unusual magnetic ordering and a large negative-thermal-expansion-like volume change, and thus, it causes a large entropy change (84.2 J K⁻¹ kg⁻¹). The observed entropy change is comparable to the largest changes reported in inorganic solid materials, and more importantly, it is utilized through a colossal barocaloric effect. The adiabatic temperature change by applying 5.1 kbar pressure is estimated to reach 13.7 K, which means efficient refrigeration can be realized through this effect.     

High-Density Frenkel Defects as Origin of N-Type Thermoelectric Performance and Low Thermal Conductivity in Mg3Sb2-Based Materials

Mg₃Sb₂-based intermetallic compounds with exceptionally high thermoelectric performance exhibit unconventional n-type dopability and anomalously low thermal conductivity, attracting much attention to the underlying mechanisms. To date, investigations have been limited to first-principle calculations and thermodynamic analysis of defect formation, and detailed experimental analysis on crystal structure and phonon modes has not been achieved. Here, a synchrotron X-ray diffraction study clarifies that, against a previous view of a simple crystal structure with a small unit cell, Mg₃Sb₂ is inherently a heavily disordered material with Frenkel defects, charge-neutral defect complexes of cation vacancies and interstitials. Ionic charge neutrality preserved in Mg₃Sb₂ is responsible for exotic n-type dopability, which is unachievable for other Zintl phase materials. The thermal conductivity of Mg₃Sb₂ exhibits deviation from the standard T⁻¹ temperature dependency with strongly limited phonon transport due to a strain field. Inelastic X-ray scattering measurement reveals enhanced phonon scattering induced by disorder. The results will draw renewed attention to crystal defects and disorder as means to explore new high-performance thermoelectric materials.     

Improved efficiency of polymer light-emitting diodes by inserting a hole transport layer formed without thermal treatment above glass transition temperature

We have demonstrated a significant improvement in the performance of polymer light-emitting diodes (PLEDs) by inserting the fluorene-triatylamine copolymer as hole transport layer (HTL) without a thermal treatment above the glass transition temperature (T_g). A thin HTL insolubilized by a thermal treatment above T_g is often inserted as an interlayer between an anode buffer layer and a light-emitting polymer (LEP) in PLEDs fabricated by using a conventional solution process. The evaporative spray deposition using ultradiluted solution (ESDUS) method has enabled fabricating polymer bilayer structure without an insolublizing procedure. The bilayer PLEDs fabricated by ESDUS without the thermal treatment showed significantly higher and more stable external quantum efficiency than PLEDs having the conventional interlayer. Thermal treatment above T_g of the copolymer would induce degradation of its hole injection property. Furthermore, ESDUS bilayer devices showed much higher power efficiency than interlayer devices when calcium was used for cathode. The improvements would be caused by the enhancement of hole injection and the effective electron blocking at the copolymer/LEP interface in the ESDUS bilayer devices.     

Novel gold-capped nanopillars imprinted on a polymer film for highly sensitive plasmonic biosensing

Herein, a nanoporous alumina was fabricated to use as a mold in transforming nanopillar structures onto a thin film polymer by thermal nanoimprint lithography (NIL). The size of the pores was successfully controlled by varying the applied voltages and etching time. These nanoporous structures were transferred to the Cyclo-olefin polymer (COP) film surface from the porous mold by a thermal nanoimprinting process. A plasmonic substrate was fabricated by sputtering a thin layer of gold onto this nanopillar polymer structure, and the refractive index response in a variety of media was evaluated. Finally, the biosensing capacity of this novel plasmonic substrate was verified by analysis of Human immunoglobulin and achieved a minimum detection limit of 1.0 ng/mL. With the advantages of mass production with consistent reproducibility stemming from the nanoimprint fabrication process, our gold-capped polymeric pillars are ready for the transition from academic interest into commercialization systems for practical use in diagnostic applications.     

Strain selection and scale-up fermentation for FR901379 acylase production by Streptomyces sp. no. 6907

Micafungin (FK463) is a widely used treatment for life-threatening, deep-seated fungal infections. It is an echinocandin-like lipopeptide derived from the chemical modification of deacylated FR901379, a type of lipopeptide antibiotic produced by Coleophoma empetri F-11899. The palmitoyl moiety of FR901379 is deacylated by FR901379 acylase produced by Streptomyces sp. no. 6907. In this study, our goal was to generate an improved strain of Streptomyces sp. no. 6907 capable of hyperproducing the FR901379-acylase enzyme. To accomplish this goal, modified strains of Streptomyces sp. no. 6907 were generated using UV-irradiation mutagenesis, and strain selection was performed using an agar-plate screening method to efficiently select an acylase-hyperproducing strain. Three marker indices were shown to correlate with elevated acylase production: decreased candidacidal activity of FR901379, decreased proteolytic activity on skim milk, and phenotypic characteristics. Cloning and subsequent sequencing of the acylase gene from the hyperproducing mutant revealed no mutations in either the acylase structural gene or the 5'-flanking region required for gene expression. The growth medium was also modified to maximize acylase production. We successfully increased acylase activity approximately 65-fold, compared with the original growth conditions (wild strain cultured in the original unmodified medium). To minimize formation of excess foam during the fermentation process, we optimized the parameters of agitation speed, as calculated from the discharge flow rate. Using our improved strain and the optimized medium and growth conditions, we have developed an improved and highly reproducible method for stable large-scale production of FR901379-acylase.     

Growth and poliovirus production of Vero cells on a novel microcarrier with artificial cell adhesive protein under serum-free conditions

A microcarrier is used for the three-dimensional (3D) culture of adhesion-dependent mammalian cells. We developed a novel microcarrier by binding ProNectin F, an artificial cell adhesive protein synthesized by genetically engineered Escherichia coli to a polyacrylic superabsorbent polymer. The microcarrier is characterized by containing no animal-derived components. The serum-free culture of Vero cells for vaccine production using the microcarrier increased the number of Vero cells by approximately 30% compared with the existing dextran beads coated with porcine Type I collagen, which resulted in approximately a 30% to 40% increase in the infectivity titer of the Sabin 2 strain of poliovirus. These results suggested that the developed microcarrier should be unprecedented in permitting high-yield vaccine production by means of a serum-free culture.     

The protein encoded by cancer/testis gene D40/AF15q14 is localized in spermatocytes, acrosomes of spermatids and ejaculated spermatozoa

We have previously identified and cloned a human gene, D40, that is preferentially expressed in testis among normal organs, while it is widely expressed in various human tumor cell lines and primary tumors derived from different organs. In this report, we have examined the expression and localization of this protein in human testis with an antibody specific to D40 protein. In Western analyses, the anti-D40 antibody recognized a major band with a molecular mass of 300 kDa and a minor band of 250 kDa. These bands were not observed in the testis lysates from patients with Sertoli-cell-only syndrome and with Kleinfelter syndrome, who lack germ cells of the testis, indicating that D40 protein is expressed in the germ cells of normal testis. Immunohistochemical studies have revealed that D40 protein is highly expressed in spermatocytes and in the pre-acrosome of round spermatids. In the acrosome, D40 protein expression is observed not inside but outside the acrosome membrane. This is consistent with the finding that the amino-acid sequence at the amino terminal of the D40 protein lacks a hydrophobic signal peptide that is required for proteins to translocate to the membrane. Expression of D40 protein is observed in the acrosome of ejaculated spermatozoa as well, although the level is low compared with that in the pre-acrosome of spermatids. These results suggest that D40 protein plays important roles in spermatogenesis, especially in the formation and maintenance of the acrosome.