Microwave-assisted desulfurization of NOx storage-reduction catalyst

The activity of NO_x storage-reduction (NSR) catalysts is greatly reduced by sulfur poisoning, caused by the SO₂ present in the exhaust stream. Desorption of sulfur species from poisoned NSR catalysts occurs at temperatures in excess of 600 °C using reducing atmospheres and conventional heating. In this work, microwave (MW) heating has been used to promote desulfurization of poisoned NSR catalysts. The experiments were carried out by heating the catalyst with MW radiation and using hydrogen as the reducing gas. Desorption of H₂S at 200 °C was observed. Desorption at even lower temperatures (150 °C) was observed when water was introduced to the system. In the presence of water, sulfur species desorbed as both H₂S and SO₂. An overall reduction of sulfur species of about 60% was obtained. The use of MW heating proves to be an efficient way to achieve regeneration of poisoned NSR catalysts.     

Drying characteristics of porous material immersed in a bed of hygroscopic porous particles fluidized under reduced pressure

A relatively large wet material was immersed in a fluidized bed of hygroscopic porous particle (silica gel beads) under reduced pressure. And then the drying characteristics were compared with those in the case of inert particle (glass beads). The comparison of drying characteristics is performed experimentally and theoretically. In calculation, the water transfer from the sample to the fluidized bed was considered. The calculation results are in good agreement with the experimental data. The effects of the operational conditions (the pressure in the drying chamber and the temperature of the drying gas) on the drying characteristics were also examined in both fluidizing particles.The drying finishes earlier in the case of hygroscopic porous particle than in the case of inert particle regardless of pressure in the drying chamber, since the water transfer from the sample facilitates the drying in the case of hygroscopic porous particles. The temperature decrement in drying appears in the case of inert particle. This phenomenon is also observed in the case of hygroscopic porous particle, but the decrement degree of the temperature is much smaller than that in the case of inert particle. The difference of the minimum temperature in the sample in drying between the cases of hygroscopic porous particle and inert particle is very slight for different pressures in the drying chamber.     

Evaluation of the agronomic effectiveness of natural and partially acidulated phosphate rocks in several soils using32P isotopic dilution techniques

The agronomic effectiveness of two natural phosphate rocks (PRs) from North Carolina (USA) and Togo and their 50% partially acidulated products (PAPRs) was evaluated in two greenhouse experiments using³²P isotopic dilution techniques, namely L and A_L values.In the first experiment rye grass was grown in a soil from Ghana. While the proportion of P in the plant derived from the P fertilizer (Pdff) ranged on. the average from about 10% for the PRs up to 80% for the PAPRs, the P fertilizer recovery was less than 1% for a 60-day growth period. In the second experiment, average values of P in the maize plants derived from the PAPRs ranged from 35% to 75% in 3 different soils. Both PRs were ineffective with the exception of North Carolina PR in the Seibersdorf soil. The P fertilizer recovery was 0.25% for the North Carolina PR in this soil whereas the recovery values ranged from 1.2% to 1.6% for the PAPRs.Mean values of the relative fertilizer efficiency estimated from the L values of each soil were less than 1% for the PRs whereas the values for the PAPRs which were dependent on soil type ranged from 20% up to 45%. The coefficient of relative effect of partial acidulation, that was calculated from the ratio of A_L values for PR and PAPR in each soil indicated that partial acidulation increased the effectiveness of the natural PRs in all soils under study.This study showed that the use of³²P isotope dilution techniques allows an accurate measurement of the P availability from natural and modified PR products to crops. Another advantage is that quantitative comparison of the P sources under study, PRs and PAPRs in this case, can be made even in soils where there is no response to the applied P sources.     

Novel synthesis of microcrystalline titanium(IV) oxide having high thermal stability and ultra-high photocatalytic activity: thermal decomposition of titanium(IV) alkoxide in organic solvents

Thermal decomposition of titanium(IV) tetra-tert-butoxide (TTB) in inert organic solvents at 573 K yielded microcrystalline anatase (titanium(IV) oxide, TiO₂) powders with a crystallite size of ca. 9 nm and a surface area of <100 m² g^-1. Primary and secondary alkoxides of titanium(IV), however, were not decomposed under similar conditions, indicating that the thermal stability of C-O bonds in the alkoxides was a decisive factor for their decomposition. The TiO₂ prepared from TTB by this manner was thermally stable upon calcination in air and retained high surface area of ca. 100 m² g^-1 even after calcination at 823 K. The as-prepared TiO₂ powders, without calcination, exhibited much higher rate of carbon dioxide formation than any other active photocatalysts such as Degussa P-25 and Ishihara ST-01 in the photocatalytic mineralization of acetic acid in aerated aqueous solutions. The higher activity of the present TiO₂ photocatalysts is attributed to both high crystallinity and large surface of the present product. The calcination of the as-prepared TiO₂ in air reduced the photocatalytic activity, but it was still higher than the other commercially available TiO₂'s. This revised version was published online in July 2006 with corrections to the Cover Date.     

Reaction products of α-tocopherol with methyl linoleate-peroxyl radicals

α-Tocopherol was reacted with methyl linoleateperoxyl radicals at 37°C. The peroxyl radicals were generated by the reaction of methyl linoleate with a free radical initiator, 2,2′-azobis(2,4-dimethylvaleronitrile). The primary products of α-tocopherol with methyl linoleate-peroxyl radicals were isolated by reversephase and normal-phase high performance liquid chromatography (HPLC), and their structures were characterized by ultraviolet (UV), infrared (IR),¹H and¹³C nuclear magnetic resonance (NMR) and mass spectrometry (MS). There were four stereoisomers of methyl 13-(8a-peroxy-α-tocopherone)-9(Z),11(E)-octadecadienoate and four stereoisomers of methyl9-(8a-peroxy-α-tocopherone)-10(E),12(Z)-octadecadienoate.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Properties of conductive films made from fine spherical silver-palladium alloy particles

Silver-palladium alloy films were made by a thick-film technique using several metal powders prepared by the spray-pyrolysis method. Two types of powders were used: silver-palladium alloy powders (15 mol % Pd and 30 mol % Pd) and mixtures of silver and palladium powders. The fired films were about 2–3 m in thickness. The alloy particles sintered uniformly in firing, whereas, in the case of the powder mixtures, the alloying of silver and palladium particles caused uneven particle growth and large voids were formed in the fired films. For this reason the films made from the alloy powders had better conductive properties than those made from the powder mixtures. The resistivities of the films made from the alloy powders were close to the intrinsic value for silver-palladium alloys. Further, the oxidation of palladium during heating in air was significantly suppressed in the alloy powders when the palladium content was lower than 30 mol % in accordance with thermodynamic considerations.     

COLOURING OF PURE IRON AFTER Ti~＋-O~＋ DUAL ION IMPLANTATION

用电化学的方法对经Ｔｉ~＋－Ｏ~＋二重离子注入后的钝铁表面进行处理，可呈现出深蓝、海蓝、褐、紫、金黄、淡黄等颜色用Ｘ射线光电子能谱（ＸＰＳ）对着色表面进行分析，发现表层有ＴｉＯ＿２富集，证明存在钛的氧化物是着色的必要条件．同时着色后的表面存在Ｔｉ的浓化层，着色的深浅程度与钛的浓度有关     

Increasing Efficiency of Force-Controlled Robotic Assembly: -Design of Damping Control Parameters Considering Cycle Time-

Parameter tuning of force control to achieve operations efficiently in robotic assembly is essential but time-consuming. In this paper, an optimal set of parameters for damping control is computed, which can reduce the cycle time of an assembly operation. The proposed method is formulated as a nonlinear optimization using a dynamic simulator based on 3D geometric model of assembled parts. The method is applied to clutch assembly for practical use. The results verify how the operations can be sped up using the obtained parameters. The proposed method enables users to introduce force control agilely.     

Determination of waviness decrease rate by measuring the frequency characteristics of the grinding force in centerless grinding

In centerless grinding, it is difficult to optimize the grinding conditions for minimizing the workpiece roundness error because of the high number of process parameters such as center height angle, blade angle, and stock removal rate. We had previously proposed a function for evaluating grinding conditions, i.e., the waviness decrease rate, in order to automatically select the optimum process parameters. In order to build a closed-loop control system for the process parameters, however, it is necessary to find a practical way to determine the waviness decrease rate. In this paper, the relationship between the waviness decrease rate and the dynamic components of the grinding force was investigated analytically. It was found that the frequency characteristics of the waviness decrease rate show a similar tendency to those of the grinding force. A grinding force measurement system was built and experiments for measuring the frequency characteristics of the grinding force were carried out. As a result, it was confirmed that the waviness decrease rate can be determined by measuring the frequency characteristics of the grinding force.