Degradation of drag reducing polymers in aqueous solutions

The performance of drag reducing polymers in turbulent flow is restricted by their mechanical degradation. This study examines how the working fluid can affect the degradation behavior of diluted drag reducing polymeric solutions. Solutions having different proportions of tap water and de-ionized water served as the working fluids. Three commercially available water soluble polymeric agents, namely, an anionic copolymer of polyacrylamide, xanthan gum, and polyethylene oxide, were then added to these solutions. All experiments had identical flow rates corresponding to turbulent conditions in a laboratory scale pipe line. Variation of pressure drop in the pipe line was then measured for 2 hours. It was found that polymer degradation is accelerated in tap water solutions compared to that in de-ionized water solutions. However, this is dependent on the specification of the polymer used, namely, the molecular weight of the polymer and the rigidity of its molecular backbone. Furthermore, a new mathematical relation has been developed to investigate degradation of the polymers over time.     

Surfactant-Assisted Dispersion of MWCNTs in Epoxy Resin Used in CFRP Strengthening Systems

The epoxy resin used as the bonding agent in carbon fiber-reinforced polymer (CFRP) strengthening systems was modified by the infusion of multiwalled carbon nanotubes (MWCNTs). Two types of surfactants, Triton X-100 and C₁₂E₈, were used to disperse the nanotubes in the epoxy resin employing ultrasonic mixing. Dynamic mechanical analysis and tensile tests were conducted to study the effect of the surfactant-assisted dispersion of nanotubes on the thermal and mechanical properties of epoxy composites. The morphology of the epoxy composites was interpreted using scanning electron microscopy (SEM). Moreover, the effect of surfactant treatment on the structure of nanotubes was investigated by Fourier transform infrared (FT-IR). Based on the experimental results, the tensile strength and the storage modulus of the epoxy resin were increased by 32% and 26%, respectively, by the addition of MWCNTs. This was attributed to the homogeneous dispersion of nanotubes in the epoxy resin according to the SEM images. Another reason for the enhancement in the tensile properties was the reinforced nanotube/epoxy interaction as a result of the surfactant anchoring effect which was proved by FT-IR. A moderate improvement in the glass transition temperature (T _g) was recorded for the composite fabricated using Triton X-100, which was due to the restricted molecular motions in the epoxy matrix. To characterize the temperature-dependent tensile behavior of the modified epoxy composites, tensile tests were conducted at elevated temperatures. It was revealed that the MWCNT modification using surfactant substantially improves the tensile performance of the epoxy adhesive at temperatures above the T _g of the neat epoxy.     

Physical and mechanical properties of the fully interconnected chitosan ice‐templated scaffolds

Porous chitosan scaffolds were prepared with a freeze‐casting technique with different concentrations, 1.5 and 3 wt %, and also different cooling rates, 1 and 4°C/min. The pore morphology, porosity, pore size, mechanical properties, and water absorption characteristics of the scaffolds were studied. Scanning electron microscopy images showed that the freeze‐cast scaffolds were fully interconnected because of the existence of pores on the chitosan walls in addition to many unidirectionally elongated pores. Increases in the chitosan concentration and freezing rate led to elevations in the thickness of the chitosan walls and reductions in the pores size, respectively. These two results led to the enhancement of the compressive strength from 34 to 110 kPa for the scaffolds that had 96–98% porosity. Also, augmentation of the chitosan concentration and decreases in the freezing rate led to the reduction of the number of pores on the chitosan walls. Furthermore, the volume of water absorption increased with a reduction in the chitosan concentration and cooling rate from 690 to 1020%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41476.     

Effect of hydrogen combustion reaction on the dehydrogenation of ethane in a fixed-bed catalytic membrane reactor

A two-dimensional non-isothermal mathematical model has been developed for the ethane dehydrogenation reaction in a fixed-bed catalytic membrane reactor. Since ethane dehydrogenation is an equilibrium reaction, removal of produced hydrogen by the membrane shifts the thermodynamic equilibrium to ethylene production. For further displacement of the dehydrogenation reaction, oxidative dehydrogenation method has been used. Since ethane dehydrogenation is an endothermic reaction, the energy produced by the oxidative dehydrogena-tion method is consumed by the dehydrogenation reaction. The results show that the oxidative dehydrogenation method generated a substantial improvement in the reactor performance in terms of high conversions and significant energy saving. It was also established that the sweep gas velocity in the shell side of the reactor is one of the most important factors in the effectiveness of the reactor.     

Gas-liquid flow mass transfer in a T-shape microreactor stimulated with 1.7 MHz ultrasound waves

This paper describes the application of ultrasound waves on hydrodynamics and mass transfer characteristics in the gas-liquid flow in a T-shape microreactor with a diameter of 800 μm.A 1.7 MHz piezoelectric transducer (PZT) was employed to induce the vibration in this microreactor.Liquid side volumetric mass transfer coefficients were measured by physical and chemical methods of CO2 absorption into water and NaOH solution.The approach of absorption of CO2 into a 1 mol· L-1 NaOH solution was used for analysis of interfacial areas.With the help of a photography system,the fluid flow patterns inside the microreactor were analyzed.The effects of superficial liquid velocity,initial concentration of NaOH,superficial CO2 gas velocity and length of microreactor on the mass transfer rate were investigated.The comparison between sonicated and plain microreactors (microreactor with and without ultrasound) shows that the ultrasound wave irradiation has a significant effect on kLa and interfacial area at various operational conditions.For the microreactor length of 12 cm,ultrasound waves improved kLa and interfacial area about 21％ and 22％,respectively.From this study,it can be concluded that ultrasound wave irradiation in microreactor has a great effect on the mass transfer rate.This study suggests a new enhancement technique to establish high interfacial area and kLa in microreactors.     

Graphene network enabled high speed electrical actuation of shape memory nanocomposite based on poly(vinyl acetate)

Here strong electroactive shape memory nanocomposites were prepared by incorporating graphene nanoplatelets into poly(vinyl acetate) (PVAc ) through the simple solvent mixing method. TEM and XRD revealed that well exfoliated graphene nanoplatelets formed a continuous network throughout the matrix with a large amount of interconnectedness. Dynamic mechanical analysis showed that the inclusion of graphene significantly improves both glassy and rubbery moduli of the matrix. Furthermore, the prepared nanocomposites demonstrated a marked electrical conductivity up to 24.7 S m^?1 and thereby surprisingly rapid electrical actuation behaviour exhibiting a 100% recovery ratio in 2.5 s. Moreover, PVAc and its nanocomposites displayed scratch self‐healing capability. This work demonstrates that the PVAc /graphene nanocomposites with high modulus and excellent electroactive shape memory performance can be a promising material in many applications such as sensors and fast deployable and actuating devices. © 2016 Society of Chemical Industry     

Polyvinylpolypyrrolidone-Supported Chlorosulfonic Acid: An Efficient Catalyst for One-Pot Synthesis of Dihydropyrimidinones and Octahydroquinazolin-2,5-diones

Polyvinylpolypyrrolidone-supported chlorosulfonic acid has been successfully applied to perform one-pot reaction of arylaldehydes, urea, ethylacetoacetate, or cyclic 1,3-diketo compounds under solvent-free condition at 70°C to provide a series of dihydropyrimidinones and octahydroquinazolin-2,5-diones in good to excellent yields. The method offers several advantages such as high yield, short reaction time, simple workup, easy preparation, and reusability of the catalyst. The [PVPP-SO₃H]⁺Cl^? catalyst was characterized via Fourier transform infrared spectroscopy (FT-IR) and thermal gravimetric analysis (TGA). Moreover, the catalyst could be recycled several times without significant loss of its catalytic activity. Clean methodologies, easy work-up procedure, high yield, and simple preparation of the catalyst are some advantages of this article.     

A numerical study on heat transfer enhancement and design of a heat exchanger with porous media in continuous hydrothermal flow synthesis system

The aim of this study is to use a new configuration of porous media in a heat exchanger in continuous hydrothermal flow synthesis (CHFS) system to enhance the heat transfer and minimize the required length of the heat exchanger.For this purpose,numerous numerical simulations are performed to investigate performance of the system with porons media.First,the numerical simulation for the heat exchanger in CHFS system is validated by experimental data.Then,porous media is added to the system and six different thicknesses for the porous media are examined to obtain the optimum thickness,based on the minimum required length of the heat exchanger.Finally,by changing the flow rate and inlet temperature of the product as well as the cooling water flow rate,the minimum required length of the heat exchanger with porous media for various inlet conditions is assessed.The investigations indicate that using porous media with the proper thickness in the heat exchanger increases the cooling rate of the product by almost 40％and reduces the required length of the heat exchanger by approximately 35％.The results also illustrate that the most proper thickness of the porous media is approximately equal to 90％ of the product tube's thickness.Results of this study lead to design a porous heat exchanger in CHFS system for various inlet conditions.     

Simultaneously energy production and dairy wastewater treatment using bioelectrochemical cells: In different environmental and hydrodynamic modes

A successful design, previously adapted for treatment of complex wastewaters in a microbial fuel cell (MFC), was used to fabricate two MFCs, with a few changes for cost reduction and ease of construction. Performance and electrochemical characteristics of MFCs were evaluated in different environmental conditions (in complete darkness and presence of light), and different flow patterns of batch and continuous in four hydraulic retention times from 8 to 30 h. Changes in chemical oxygen demand, and nitrate and phosphate concentrations were evaluated. In contrast to the microbial fuel cell operated in darkness (D-MFC) with a stable open circuit voltage of 700 mV, presence of light led to growth of other species, and consecutively low and unsteady open circuit voltage. Although the performance of theMFC subjected to light (L-MFC)was quite lowand unsteady in dynamic state (internal resistance = 100 Ω, power density = 5.15 W·m^-3), it reached power density of 9.2 W·m^-3 which was close to performance of D-MFC (internal resistance = 50 Ω, power density = 10.3 W·m^-3). Evaluated only for D-MFC, the coulombic efficiency observed in batch mode (30%) was quite higher than the maximum acquired in continuous mode (9.6%) even at the highest hydraulic retention time. In this study, changes in phosphate and different types of nitrogen existing in dairy wastewater were investigated for the first time. At hydraulic retention time of 8 h, the orthophosphate concentration in effluent was 84% higher compared to influent. Total nitrogen and total Kjeldahl nitrogen were reduced 70% and 99% respectively at hydraulic retention time of 30 h, while nitrate and nitrite concentrations increased. The microbial electrolysis cell (MEC), revamped from D-MFC, showed the maximum gas production of 0.2 m³ H₂·m^-3·d^-1 at 700 mV applied voltage.