Validation of a Method for Quantitation of Soybean Lectin in Commercial Varieties

Soybean agglutinin (SBA) protein, also known as soybean lectin, is regarded as an anti‐nutrient due to its negative effect on the ability of monogastric animals to gain weight following consumption of raw soybean seed. Historically, SBA has been measured using a time‐consuming and cumbersome hemagglutination procedure. The objective of our research was to obtain a validated methodology that is precise and accurate in the measurement of SBA while allowing minimally equipped laboratories to effectively conduct the analysis, thus our focus was on evaluating an existing commercially available ELISA, an enzyme‐linked‐lectin‐assay (ELLA), and a hybrid ELISA/ELLA. A new ELLA technique that can detect and quantify lectins was chosen and modified specifically for the quantitation of SBA in soybean seed. The proposed ELLA methodology is similar to a standard sandwich ELISA, and uses polyacrylamide‐linked N‐acetylgalactosamine (Gal–NAc–PAA) for a capture phase and the biotinylated version (Gal–NAc–PAA–Biotin) for detection. Based upon the validation data, the ELLA method can precisely and accurately determine soybean lectin levels in soybean seed. The validated ELLA method was used to quantify SBA in nine commercial soybean varieties introduced between 1972 and 2008 and demonstrated that the natural variability of SBA is subject to the effects of genotype and environment.     

Study of the effect of processing conditions on the co‐injection of PBS/PBAT and PTT/PBT blends for parts with increased bio‐content

This work studies the effect of processing parameters on mechanical properties and material distribution of co‐injected polymer blends within a complex mold shape. A partially bio‐sourced blend of poly(butylene terephthalate) and poly(trimethylene terephthalate) PTT/PBT was used for the core, with a tough biodegradable blend of poly (butylene succinate) and poly (butylene adipate‐co‐terephthalate) PBS/PBAT for the skin. A ½ factorial design of experiments is used to identify significant processing parameters from skin and core melt temperatures, injection speed and pressure, and mold temperature. Interactions between the processing effects are considered, and the resulting statistical data produced accurate linear models indicating that the co‐injection of the two blends can be controlled. Impact strength of the normally brittle PTT/PBT blend is shown to increase significantly with co‐injection and variations in core to skin volume ratios to have a determining role in the overall impact strength. Scanning electron microscope images were taken of co‐injected tensile samples with the PBS/PBAT skin dissolved displaying variations of mechanical interlocking occurring between the two blends. © 2014 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41278.     

The potential to retrofit sustainable drainage systems to address combined sewer overflow discharges in the Thames Tideway catchment

Experience of retrofitting sustainable drainage systems (SuDS) in the United Kingdom is limited, and there are no well‐established procedures for evaluating the feasibility, value or cost‐effectiveness of doing this, particularly at the catchment scale. This paper demonstrates a two‐phase process for evaluating the potential to retrofit SuDS to address combined sewer discharges in three subcatchments within the Thames Tideway catchment of London. The first phase evaluates what might be achieved with various levels of disconnection (‘global’ disconnection scenarios) using hydraulic models, while the second phase considers how disconnection might practically be achieved. High levels of disconnection are technically possible but practicably difficult. In selected cases, and with aggressive implementation of SuDS, combined sewer overflow CSO discharges could potentially be eliminated or reduced to acceptable levels without the need for any modifications to underground assets. However, retrofit SuDS could not eliminate the requirement for some form of sewer modification in any subcatchments.     

Riparian anomie: Reflections on the Los Angeles River

This paper explores the highly urbanized landscape of the Los Angeles River. Direct encounters with the contemporary river are combined with an historical exploration of some of the developments associated with its transformation into a 51-mile concrete drainage channel. It is suggested that the current landscape of the Los Angeles River not only reveals much about the complex relations between nature and culture in southern California but also illustrates how the contemporary city is marked by a schism between technical conceptions of water control and new attempts to combine river management with wider social and ecological objectives.     

Safety risk perception in construction companies in the Pacific Northwest of the USA

Unsafe worker actions contribute greatly to the frequency and severity of construction injuries. Recently, contractors have expressed concern with the high rate of injuries that occur when workers violate company safety policies. To enhance knowledge associated with this topic the following four objectives were targeted: (1) quantifying the current level of safety risk as perceived by construction workers; (2) quantifying the risk tolerance of workers and managers; (3) comparing the risk perceptions and tolerance of workers with managers; and (4) identifying factors that may affect one’s risk tolerance. Fifty‐one risk perceptions were gathered through interviews with managers and workers of nine different construction firms in the Pacific Northwest region of the United States. The results indicate that the level of current perceived risk is approximately five times higher than the tolerable risk value, workers are most dissatisfied with the frequency of high severity injuries, and there is a statistically significant difference in the risk tolerance between workers and managers. The findings presented can be used by project managers to increase awareness of risk tolerances, current areas where workers feel improvement is most needed, and for goal setting.     

Effectiveness of cationically modified cellulose polymers for dewatering algae

A method to flocculate algal cultures of Chlamydomonas reinhardtii using four different industrially produced polymers is presented. Starting with a 1 wt% stock polymer solution, flocculation times less than 60 min were observed for 0.1 to 0.6 g polymer per L of algae culture, while control samples took greater than 1400 min to flocculate. Cell counts showed that 99% of the cells were flocculated using the polymers compared to 73% for the control. Finally, the flocculation process was successful at both 5 and 40 mL batch sizes for one polymer; therefore, the method is efficient, effective and may be scalable.     

Uncertainty quantification via bayesian inference using sequential monte carlo methods for CO2 adsorption process

This work presents the uncertainty quantification, which includes parametric inference along with uncertainty propagation, for CO₂ adsorption in a hollow fiber sorbent, a complex dynamic chemical process. Parametric inference via Bayesian approach is performed using Sequential Monte Carlo, a completely parallel algorithm, and the predictions are obtained by propagating the posterior distribution through the model. The presence of residual variability in the observed data and model inadequacy often present a significant challenge in performing the parametric inference. In this work, residual variability in the observed data is handled by three different approaches: (a) by performing inference with isolated data sets, (b) by increasing the uncertainty in model parameters, and finally, (c) by using a model discrepancy term to account for the uncertainty. The pros and cons of each of the three approaches are illustrated along with the predicted distributions of CO₂ breakthrough capacity for a scaled‐up process. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3352–3368, 2016