The Clouds distributed operating system

The authors discuss a paradigm for structuring distributed operating systems, the potential and implications this paradigm has for users, and research directions for the future. They describe Clouds, a general-purpose operating system for distributed environments. It is based on an object-thread model adapted from object-oriented programming     

Developing the Processing Maps Using the Hyperbolic Sine Constitutive Equation

Hot compression tests were performed on a duplex stainless steel at temperatures ranging from 1223 K to 1473 K (950 °C to 1200 °C) and strain rates from 0.001 to 100 s^?1. The constitutive analysis of flow stress was carried out using the hyperbolic sine function, and the material constants were determined at two typical strains of 0.3 and 0.7. The power dissipation map, instability map, and processing map for the material were developed for strains of 0.3 and 0.7. The developed processing maps were based on the hyperbolic sine as well as the conventional power-law constitutive equations. The efficiency of power dissipation (η) varied from 12 to 60 pct over the studied temperature and strain rate. The highest value of η was obtained at strain rates below 0.01 s^?1, whereas the lowest value of η was observed at the intermediate strain rates. The instability region in sin h-based processing map was only observed in the range of 1423 K to 1473 K (1150 °C to 1200 °C) and at a strain rate of 100 s^?1, while the conventional processing map did not predict any instability region. Optical microscopy observations were more consistent with the results of the sin h-based processing map and indicated that the instability regime at high temperatures and high strain rates was due to the development of adiabatic shear bands.     

Antioxidant Activity of Ethanol and Lipophilic Extracts of Common Fruity Vegetables in Bangladesh

The amount of phenolics, flavonoids, and anthocyanins in ethanol extracts and antioxidant activity of both ethanol and lipophilic extracts of common fruity vegetables in Bangladesh were studied. Among the ethanol extracts of 15 fruity vegetables, M. oleifera had the highest total polyphenol content (85.05 mg gallic acid equivalent/g extract) followed by L. acutangula (61.74 mg gallic acid equivalent/g extract) and A. esculentus (48.92 mg gallic acid equivalent/g extract). L. acutangula had high a content of flavonoids (14.46 mg (+)-catechin equivalent/g extract), which was almost similar to L. siceraria (13.67 mg catechin equivalent/g extract) followed by A. esculentus (11.95 mg catechin equivalent/g extract) and S. melongena (11.42 mg catechin equivalent/g extract). Highest anthocyanins content was in F. hispida (2.22 μmol/g extract) followed by S. melongena (1.04 μmol/g extract). Ethanol extracts of A. esculentus, F. hispida, L. acutangula, L. siceraria, and S. melongena exhibited high DPPH free radical scavenging activity with IC₅₀ of 70.4, 64.9, 70.4, 64.9, and 94.3 μg/mL respectively, whereas for the same lipophilic extracts of F. hispida and S. melongena showed lowest (37 μg/mL) IC₅₀ followed by M. oleifera (47.6 μg/mL), L. siceraria (57.5 μg/mL), and A. esculentus (63.3 μg/mL). These vegetables also showed high reducing powers, NO scavenging and total antioxidant capacity. Therefore, the top five potential fruity vegetables consist of both hydrophilic and lipophilic antioxidant(s), the order being F. hispida > M. oleifera > A. esculentus, L. acutangula > L. siceraria > and S. melongena.     

Carburizing of Duplex Stainless Steel (DSS) Under Compression Superplastic Deformation

A new surface carburizing technique which combines superplastic deformation with superplastic carburizing (SPC) is introduced. SPC was conducted on duplex stainless steel under compression mode at a fixed 0.5?height reduction strain rates ranging from 6.25?×?10^?5?to 1?×?10^?3?s^?1?and temperature ranging from 1173?K to 1248?K (900?°C to 975?°C). The results are compared with those from conventional and non-superplastic carburizing. The results show that thick hard carburized layers are formed at a much faster rate compared with the other two processes. A more gradual hardness transition from the surface to the substrate is also obtained. The highest carburized layer thickness and surface hardness are attained under SPC process at 1248?K (975?°C) and 6.25?×?10^?5?s^?1?with a value of (218.3?±?0.5)???m and (1581.0?±?5.0) HV respectively. Other than that, SPC also has the highest scratch resistance.     

Household food security in the face of climate change in the Hindu-Kush Himalayan region

This study attempts to understand local people’s perceptions of climate change, its impacts on agriculture and household food security, and local adaptation strategies in the Hindu-Kush Himalayan (HKH) region, using data from 8083 households (HHs) from four river sub-basins (SBs), i.e. Upper Indus (Pakistan), Eastern Brahmaputra (India), Koshi (Nepal) and Salween and Mekong (China). The majority of households in SBs, in recent years, have perceived that there have been more frequent incidences of floods, landslides, droughts, livestock diseases and crop pests, and have attributed these to climate change. These changes have led to low agricultural production and income, particularly in Eastern Brahmaputra (EB) where a substantial proportion of HHs reported a decline in the production of almost all staple and cash crops, resulting in very low farm income. Consequently, households’ dependency on external food items supplied from plain areas has increased, particularly in the Upper Indus (UI) and EB. After hazards, households face transitory food insecurity owing to damage to their local food systems and livelihood sources, and constrained food supply from other areas. To cope with these, HHs in SBs make changes in their farming practices and livestock management. In EB, 11 % of HHs took on new off-farm activities within the SB and in SM, 23 % of HHs chose out-migration as an adaptation strategy. Lastly, the study proposes policy instruments for attaining sustainable food security, based on agro-ecological potential and opportunities for increasing agricultural resilience and diversity of livelihoods.     

Thermodynamic, electrochemical and quantum chemical investigation of some Schiff bases as corrosion inhibitors for mild steel in hydrochloric acid solutions

The corrosion inhibition of mild steel in 1.0 M HCl solution by four Schiff bases was investigated using weight loss and electrochemical measurements and quantum chemical calculations. All compounds showed >90% inhibition efficiency at their optimum concentrations. The activation energy (E_a) of corrosion and other thermodynamic parameters were calculated to elaborate the mechanism of corrosion inhibition. The adsorption of the inhibitors on the mild steel surface follows Langmuir isotherm model. Polarization studies indicated that all studied inhibitors are mixed type. The computed quantum chemical properties viz., electron affinity (EA) and molecular band gap (ΔE_MBG) show good correlation with experimental inhibition efficiencies.     

Modeling the Flow Curve Characteristics of 410 Martensitic Stainless Steel Under Hot Working Condition

The hot deformation behavior of AISI 410 martensitic stainless steel was investigated by conducting hot compression tests between 1173 K (900 °C) and 1423 K (1150 °C) and between strain rates of 0.001 s⁻¹ to 1 s⁻¹. The hyperbolic sine function described the relation well between flow stress at a given strain and the Zener–Hollomon parameter (Z). The variation of flow stress with deformation temperature gave the average value of apparent activation energy as 448 kJ/mol. The strain and stress corresponding to two important points associated with flow curve (i.e., peak strain and the onset of steady-state flow) were related to the Z parameter using power-law equations. A model also was proposed based on the Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation to estimate the fractional softening of dynamic recrystallization at any given strain. This model can be used readily for the prediction of flow stress. The values of n and k, material constants in the JMAK equation, were determined for the studied material. The strains regarding the peak and the onset of steady-state flow were formulated in term of applied strain rate and the constants of the JMAK equation. A good agreement was found between the predicted strains and those obtained by the experimental work.     

Electrical‐Polarization‐Induced Ultrahigh Responsivity Photodetectors Based on Graphene and Graphene Quantum Dots

Hybrid quantum dot–graphene photodetectors have recently attracted substantial interest because of their remarkable performance and low power consumption. However, the performance of the device greatly depends on the interfacial states and photogenerated screening field. As a consequence, the sensitivity is limited and the response time is relatively slow. In order to circumvent these challenges, herein, a composite graphene and graphene quantum dot (GQD) photodetector on lead zirconate titanate (Pb(Zr_0.2Ti_0.8)O₃) (PZT) substrates has been designed to form an ultrasensitive photodetector over a wide range of illumination power. Under 325 nm UV light illumination, the device shows sensitivity as high as 4.06 × 10⁹ A W^?1, which is 120 times higher than reported sensitivity of the same class of devices. Plant derived GQD has a broad range of absorptivity and is an excellent candidate for harvesting photons generating electron–hole pairs. Intrinsic electric field from PZT substrate separates photogenerated electron–hole pairs as well as provides the built‐in electric field that causes the holes to transfer to the underlying graphene channel. The composite structure of graphene and GQD on PZT substrate therefore produces a simple, stable, and highly sensitive photodetector over a wide range of power with short response time, which shows a way to obtain high‐performance optoelectronic devices.     

Quantitative duplex real-time polymerase chain reaction assay with TaqMan probe detects and quantifies Crocodylus porosus in food chain and traditional medicines

Consumption and exploitation of crocodiles have been rampant for their exotic, nutritive and medicinal attributes. These depredations are alarming and although they have continued to be monitored by wildlife and conservation agencies, unlawful trading of crocodiles shows an increasing trend worldwide. Recently, conventional polymerase chain reaction (PCR) and PCR-restriction fragment length polymorphism (RFLP) assays for crocodile have been documented but they are only suitable for identification and cannot quantify adulterations. We described here a quantitative duplex real-time PCR assay with probes to quantify contributions from Crocodylus porosus materials simultaneously. A very short amplicon size of 127bp was used because longer targets could have been broken down in samples, bringing considerable uncertainty in molecular analysis. We have validated a TaqMan probe-based duplex real-time PCR (qPCR) assay for the detection of 0.004 ng DNA in pure state and 0.1% target meat in model chicken meatball. False negative detection was eliminated through an endogenous control (141-bp site of eukaryotic 18S rRNA). Analysis of 12 model chicken meatballs adulterated with C. porosus reflected 96.3?120.2% target recovery at 0.1?10% adulterations. A validation test of 21 commercial food and traditional medicine (TM) crocodile-based products showed 100% effectiveness. Short amplicon sizes, alternative complementary target, exceptional stability and superior sensitivity suggested the assay could be used for the identification and quantitative determination of C. porosus in any food or TM samples even under degraded conditions.