Experimental investigation on the stability of bride girder against tsunami forces

Bridges are the most useful part in the transportation network. Any disruption of the bridge structures may hamper the whole transportation system. In the last recent tsunamis, numerous number of bridges were structurally damaged by the tsunami waves. Lack of proper provisions of tsunami forces in the design guidelines also contributes to the augmentations of the damage level. Therefore, proper evaluation of the tsunami forces on the bridge girder should be introduced in the design promptly. In this study, laboratory experiments were carried out to reveal the damage mechanism of the bridge girder by assessing the exerted tsunami forces. Both broken and unbroken waves were considered for the analysis. The results showed that measured forces were larger for broken waves than those of unbroken waves. Maximum force of the broken waves was 4.59 times as large as the hydrostatic pressure. Also, waves reached the peak value more rapidly for larger wave heights than those of smaller ones. Additionally, a girder that is placed at a higher position is much vulnerable to tsunami hazard.     

Mechanical properties study of photocured paperboard surface treated with aliphatic epoxy diacrylate

In order to improve the quality of paperboard (a well‐known packing material) surface by photocuring method, different formulations were developed with aliphatic epoxy diacrylate (EA‐1020) oligomer along with reactive monomers of various functionalities. The reactive monomers are tripropylene glycol diacrylate (TPGDA), a difunctional monomer, and trimethylol propane triacrylate (TMPTA), a trifunctional monomer. 2‐Benzyl‐2‐dimethylamino‐1(4morpholinophenyl) butanone‐1 (Irgacure 369), a photoinitiator (2%), was incorporated into the formulations to initiate photocuring reaction. The formulated solutions were coated on clean glass plate and irradiated under UV radiation of different intensities. Different physical properties like pendulum hardness and gel content of the cured films were studied. The formulation containing TMPTA showed better properties. After characterization of the films, these formulations were applied on paperboard surfaces and cured under the same UV radiation. Various physicomechanical properties such as pendulum hardness, tensile properties, surface gloss, adhesion, abrasion, and water uptake were studied. The best performance was obtained at 12 passes of radiation with 18% TMPTA‐containing formulation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1774–1780, 2003     

Effect of operating factors on liquid–liquid mass transfer and dispersion pattern of sedimentary liquid in a mechanically stirred vessel

Liquid–liquid dispersion and mass transfer were investigated in mechanically stirred vessels without baffles by changing operation factors such as an impeller rotation speed, off-bottom clearance, volumetric liquid ratio, etc. The dispersion regime was categorized into five groups: the sedimentary liquid was kept at the vessel bottom (I), partially elevated without any collision (II), partially dispersed by colliding with the impeller bottom (III), both liquids were partially dispersed by collisions with impeller blades (III’), and the sedimentary liquid was completely dispersed (IV). The dispersion switched to I → II → III → IV with the increasing rotation speed and decreasing off-bottom clearance. The liquid–liquid mass transfer rate was significantly enhanced with the collision of the sedimentary liquid with the impeller bottom, and subsequently increased with the increasing rotation speed, volumetric liquid ratio, and vessel diameter and with the decreasing off-bottom clearance. A multiple regression analysis method was applied to determine the mass transfer rates of III and III’.     

Thermal behaviour and crystallization analysis of ethylene-propylene (EP) copolymer and EP-styrene terpolymer

Polyolefin copolymers have been an important commercial product since their invention. Hence, it is crucial to study their co- and terpolymers due to their extensive use. In this paper, in situ synthesis of ethylene-propylene (EP) copolymer, its terpolymer with styrene, and composites with nickel-chromium (NiCr) layered double hydroxide (LDH) has been reported along with their thermal properties. Styrene had a significant impact on the activity, increasing the yield by 195% and 235% with an addition of 0.5 and 1.0 mL styrene, respectively, compared to neat EP. The crystallinity, melting temperature, and thermal stability decreased due to styrene; nevertheless, it performed better compared to a similar work of terpolymer where α-olefin was the third monomer. The incorporation of NiCr LDH as a drop-in filler during in situ polymerization affected adversely the thermal stability of the terpolymer. However, the ultrasonication treatment improved the thermal stability of the final product.     

ZnO nanorods surface-decorated by WO3 nanoparticles for photocatalytic degradation of endocrine disruptors under a compact fluorescent lamp

Nanoscaled tungsten oxide (WO₃) particles coated on ZnO nanorods (ZNRs) were newly synthesized by combining a hydrothermal technique with a chemical solution process. The structure, morphologies and compositions of the as-prepared WO₃–ZNR nanocomposites were characterized through XRD, FESEM, TEM and Raman measurements. The results revealed that pure monoclinic WO₃ nanoparticles with an average size range of 18–26 nm were distributed on the surfaces of ZNRs and attached strongly. Particularly, the optical properties as well as photocatalytic characteristics of pure ZNRs and WO₃–ZNR nanocomposites with different loadings of WO₃ were also examined. The absorption of WO₃–ZNR nanocomposites was redshifted due to effective immobilization of WO₃ on ZNRs. Under irradiation of a 55 W compact fluorescence lamp, the photocatalytic activities of the WO₃–ZNR nanocomposites were superior to those of pure ZNRs and P25 in the degradation of resorcinol (ReOH). Furthermore, WO₃–ZNR nanocomposites showed very favorable recycle use potential and high sedimentation rate. Other endocrine disrupting chemicals (EDCs) such as phenol, bisphenol A (BPA) and methylparaben were also successfully photodegraded under identical conditions. These characteristics showed the practical applications of the WO₃–ZNR nanocomposites in indoor environmental remediation.     

The effects of processing parameters on formation of nano-spinel (MgAl2O4) from LiCl moltensalt

Nano-MgAl₂O₄ particles were successfully synthesized at 850 °C using the molten-salt method, and the effects of processing parameters, such as temperature, holding time and amount of salt on the crystallization of MgAl₂O₄ were investigated. Nano-alumina, magnesia and lithium chloride were used as starting materials. LiCl molten salt provided a liquid medium for reaction of Al₂O₃ and MgO to form MgAl₂O₄. The results demonstrated that MgAl₂O₄ started to form at about 650 °C and that, after the temperature was increased to 1000 °C, the amounts of MgAl₂O₄ in the resultant powders increased with a concomitant decrease in Al₂O₃ and MgO contents. After washing with hot-distilled water, the samples heated for 3 h at 850 °C were single-phase MgAl₂O₄ with 30–50 nm particle size. Furthermore, the synthesized MgAl₂O₄ particles retained the size and morphology of the Al₂O₃ powders, which indicated that a template formation mechanism dominated the formation of MgAl₂O₄ by molten-salt method.     

Preparation of Rayon Fiber-Reinforced Polypropylene Composites by Extrusion Techniques

Hybrid composites from rayon fibers (～2–5 cm size) and polypropylene (PP) were fabricated by using an extruder. Fibre content of the composite was varied from 5–30% by weight and physico-mechanical properties of the composites were measured. Surface morphology as observed by SEM showed good interface adhesion between rayon and PP matrix. Furthermore inclusion of rayon (up to 15% fiber inclusion) in the composite increased tensile, bending and hardness properties. As the fiber content in the composite increased more than 15%, physico-mechanical properties decreased due to the decrease of fiber matrix adhesion. The change of tensile properties due to environmental aging was carried out by keeping the composite under soil for 1 month and tensile properties were measured periodically. The aging result suggests that composites retained about 75% of its original tensile and bending strength even after 1 month soil burial. The modified fibers were also used for the study. As such the fibers were treated with vinyl-trimethyoxysilane and methanol solution and irradiated under UV before being used with PP in extruder. The results showed retardation of the physico-mechanical properties for composites obtained from irradiated rayon fibers than the composites fabricated from non irradiated rayon fibers.     

MICROFLORA CHANGES IN TUNA MINCE DURING CONVECTION AIR DRV1NG

Abstract

Microorganisms grow in tuna during drying at low temperatures. The drying temperature of 50°C or below is not lethal to the microflora. The decimal reduction time (D-value) varied from 12.66 to 2.63 hr when drying temperature increased from 60 to 100°C, respectively. These values can be used to estimate the lethal effect of drying on the natural microflora in tuna.