Iterative step‐by‐step procedure for optimal placement and design of viscoelastic dampers to improve damping ratio

In this study, an iterative step‐by‐step procedure is proposed for optimal placement and design of viscoelastic dampers in order to achieve a target damping ratio based on simple equations and quick estimation. Through the procedure, the dampers are placed one by one in stories with maximum interstory drift at each sequence. Effect of lateral stiffness of added dampers and consequent changes in frequency of the structure as well as changes in damping characteristic of the structure after adding each damper are also considered at each sequence. In order to achieve an economical design, dampers are designed according to the lateral stiffness at each story of the main structure instead of using identical dampers in all stories. During the whole procedure, a time‐history analysis is performed at each sequence. Two numerical examples, including an 8‐story and a 15‐story building, are presented. The results indicate that optimal arrangement of dampers has a considerable influence on reduction of roof displacement up to 25% compared to uniformly distributed arrangement of dampers. In addition, with optimal arrangement, the number of dampers needed to achieve a specific interstory drift is significantly reduced, and the structural damping ratio is improved to a target value, reflecting global optimality of the proposed method.     

Radiosynthesis and biodistribution of [^18F]-tetracosactide using a semi-automated [^18F]SFB production module

In order to prepare a specific melanocortin type 2 receptor (MC2R) ligand, b1-24-corticotrophin was pre-pared in one-step reaction with [18F] SFB and b-1-24-corticotrophin pharmaceutical solution (1 mg/mL, pH=6.5). [18F]SFB was prepared in a semi-automated module in two steps with an overall radiochemical yield of 47% to EOB (not-decay corrected) in 90 min. The 18F-labeled intermediates and 18F-labeled peptide was checked by RTLC and HPLC. The results show that the radiochemical purity is >95% and the yield to EOB (not-decay corrected) is 29% for final 18F-labeled peptide at optimized conditions. Preliminary in vivo studies in normal mice were performed to deter-mine biodistribution of the 18F-labeled peptide for 150 min. The results show that the major tracer uptake is consistent with the natural distribution of MC2R receptors in mammals. Testes/blood and testes/muscle ratios for 18F-labeled peptide at 150 min were 184 and 1.56, respectively, and adipocyte/blood and adipocyte/muscle ratios at 120 min were 221 and 142, respectively. The data support the specific receptor binding of the radiolabeled peptide as reported for MC2R receptor accumulation in adipocytes and testes and demonstrates the retention of biological activity of the pep-tide. This tracer can be used in detection of MC2R distribution in malignancies and sex organ diseases.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.     

A comparative study for synthesis methods of nano-structured (9Ni–2Mg–Y) alloy catalysts and effect of the produced alloy on hydrogen desorption properties of MgH2

9Ni–2Mg–Y alloy powders were prepared by arc melting, induction melting, mechanical alloying, solid state reaction and subsequent ball milling processes. The results showed that melting processes are not suitable for preparation of 9Ni–2Mg–Y alloy due to high losses of Mg and Y. Therefore, 9Ni–2Mg–Y alloy powder was prepared by three methods including: 1) mechanical alloying, 2) mechanical alloying + solid state reaction + ball milling, and 3) mixing + solid state reaction + ball milling. The prepared 9Ni–2Mg–Y alloy powders were compared for their catalytic effects on hydrogen desorption of MgH₂. It is found that 9Ni–2Mg–Y alloy powder prepared by mechanical alloying + solid state reaction + ball milling method has a smaller particle size (1–5 μm) and higher surface area (1.7 m² g⁻¹) than that of other methods. H₂ desorption tests revealed that addition of 9Ni–2Mg–Y alloy prepared by mechanical alloying + solid state reaction + ball milling to MgH₂ decreases the hydrogen desorption temperature of MgH₂ from 425 to 210 °C and improves the hydrogen desorption capacity from 0 to 3.5 wt.% at 350 °C during 8 min.     

Al2O3–Water nanofluid heat transfer and entropy generation in a ribbed channel with wavy wall in the presence of magnetic field

In this article, a parametric study is conducted to evaluate heat transfer enhancement in a ribbed channel containing Al₂O₃–Water nanofluid with wavy wall. The physical domain is under the influence of the magnetic field that creates a negative force against the working fluid to move. Nanofluid with higher temperature enters the cool ribbed duct and heat is exchanged along the walls of channel. The effects of the dominant parameters including number of the blocks, solid volume fractions of nanofluid, Hartmann number, Reynolds number, and different states of amplitude sine waves are numerically tested on the local and average Nusselt number, skin friction, and total entropy generation. Excellent agreement between present study and previous literature is observed. It is found that, an augmentation in magnetic field will result in higher values of both local and average Nusselt number accompanying with bigger values of skin friction and entropy generation. Computations illustrate that, increasing the solid volume fraction of the Al₂O₃ nanoparticles will raise the Nusselt number and total entropy generation rate but its effect on the skin friction is negligible. Also, numerical results imply that increasing amplitude sine waves of the geometry has incremental effect on the Nusselt number and skin friction but its effect on the total entropy generation rate is not so clear. Moreover, by adding number of the used blocks in the presence of magnetic field, the local Nusselt number experiences more jumps but it does not increase the average Nusselt number, necessarily. In addition, using more blocks increases skin friction but it has a reverse effect on the total entropy generation rate.     

Platinum–Iron nanoparticles supported on reduced graphene oxide as an improved catalyst for methanol electro oxidation

Platinum–Iron nanoparticles supported on reduced graphene oxide powder are synthesized by chemical reduction method as an anode catalyst for the methanol electro oxidation. The characterization of the catalyst has been investigated using physical and electrochemical methods. Prepared catalyst was characterized by scanning electron microscopy (SEM), TEM (Transmission electron microscopy), FT-IR (Fourier-transform infrared spectroscopy), Raman spectroscopy and, X-ray diffraction (XRD) and energy dispersive analysis of X-ray (EDX). Pt and Pt-Fe nanoparticles are uniformly dispersed on the surface of reduced graphene oxide (rGO) powder nanocomposite support. The catalytic properties of the catalyst for methanol electro-oxidation were thoroughly studied by electrochemical methods that involved in the cyclic voltammetry, linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS). The Pt-Fe/rGo exhibits high electrocatalytic activity, catalyst tolerance for the CO poisoning and catalyst durability for electro-oxidation of methanol compared to the Pt/rGo and commercial Pt/C catalyst. Therefore, the Pt-Fe/rGo catalyst is a good choice for application in direct methanol fuel cells.     

Numerical evaluation and the effects of geometrical and operational parameters on thermal performance of the shell and double coil tube heat exchanger

Heat exchangers are extensively used in various industries. In this study, the impact of geometric and flow parameters on the performance of a shell and double helical coil heat exchanger is studied numerically. The investigated geometric parameters include external coil pitch, internal coil pitch, internal coil diameter, and coil diameter. The influences of considered geometrical parameters are analyzed on the output temperature of the hot and cold fluid, convective heat transfer coefficient, pressure drop, and average Nusselt number. Water is considered as working fluid in both shell and tube. As an innovation, double helical coils are used instead of one in the heat exchanger. To compare the obtained results accurately, in each section, the heat transfer area (coil outer surface) is kept constant in all models. The results show that the geometrical parameters of double helical coils significantly affect the heat transfer rate.     

LBM investigation of a Cu-water nanofluid over various configurations of pipes in the mixed convection flow

Increasing the heat capacity of heat exchangers is a crucial need for modern devices. The thermal conductivity of the usual fluids and the Nusselt (Nu) number of flows containing such fluids are two bottlenecks in the way of increasing heat delivery in the heat exchangers. For this reason, nanofluids have been introduced. The effect of utilizing a Cu-water nanofluid as a coolant of two hot pipes in a square cavity is investigated numerically with a two-component lattice Boltzmann method. The volume fraction of nanoparticles is assumed to be constant (0.03) while the Richardson (Ri) number varies from 0.02 to 20. Results show that the effectiveness of nanoparticles is better observed in the natural convection mode. However, sedimentation is also very probable at high Ri numbers, which significantly reduces the effectiveness of the nanoparticles. Configurations which produce a natural convection stream similar to the forced convection one as well as the configurations with high spacing and hence, low heat stream interactions, are the best choices for a uniform heat rate from the pipes.     

Modeling managerial behavior in real options valuation for project-based environments

Project valuation, as a decision-making tool for initiating investments in projects, should be able to value project flexibilities and incorporate reasonable risk preferences of relevant decision makers. Real options valuation methods are the available approaches for valuing project flexibilities, whereas they have shortcomings in considering managers’ reasonable risk preferences in project decisions. Therefore, researchers have suggested approximating the perspective on risk of real options methods and practitioners in project management. This study proposes a fair real options valuation for project-based environments by a behavioral economic approach, which adopts binomial lattice method, Monte-Carlo simulation, and cumulative prospect theory. The results show that behavioral factors such as ‘risk attitude’ and ‘loss aversion’ should be accepted in project investment decisions while limited to an acceptable amount depending on the project conditions (e.g. uniqueness of decision-making scenarios). This research contributes to the project management domain by enhancing project investment decisions that include project flexibilities.     

All two-input logic gates by a single-stage single electron box

In this paper, the design of all two-input logic gates is presented by only a single-stage single electron box (SEB) for the first time. All gates are constructed based on a same circuit. We have used unique periodic characteristics of SEB to design these gates and present all two-input logic gates (monotonic/non-monotonic, symmetric/non-symmetric) by a single-stage design. In conventional monotonic devices, such as MOSFETs, implementing non-monotonic logic gates such as XOR and XNOR is impossible by only a single-stage design, and a multistage design is required which leads to more complexity, higher power consumption and less speed of the gates. We present qualitative design at first and then detailed designs are investigated and optimised by using our previous works. All designs are verified by a single electron simulator which shows correct operation of the gates.