Optimization of optical single sideband configurations for radio over fiber transmission and multi-type data communication over a DWDM link

Two new optical single side band (OSSB) configurations for radio frequency (RF) transmission of data are proposed based on the structures that have been designed for baseband digital data transmission. The performances of these schemes are evaluated based on the relevant eye diagrams and bit error rate (BER). The proposed configurations are studied and analyzed mathematically. Eye diagrams and BER’s indicate an acceptable performance for the suggested structures. Feasible settings for the RF electrical power of the links are considered and the link performance for each setting is evaluated. A 4-dense wavelength division multiplexing (4-DWDM) link is considered for transmitting different types of data over a single mode fiber (SMF). Baseband digital data in the format of OSSB and RF-OSSB signals are transmitted over a 4-DWDM link. Furthermore, the link performance is considered for different electrical power settings of OSSB signal in order to achieve efficient transmission for DWDM network.     

Multiscale analysis of viscoelastic laminated composite plates using generalized differential quadrature

In this paper, a laminated composite plate is analyzed using a multiscale method. At first, material properties of a lamina are obtained using an analytical micromechanical approach called simplified unit cell method (SUCM), and then in structural level, the generalized differential quadrature method (GDQM) is used to analyze a laminated composite plate. By means of the Boltzmann superposition principle, the viscoelastic behavior of the matrix is obtained. The Prony series is considered to define the compliance of matrix. To verify the results, graphiteT300/epoxy5208 composite material is analyzed and the results are compared with existing experimental data. The multiscale algorithm includes obtaining overall properties of the composite by SUCM; then, these properties are used to define the bending stiffness. Governing equations of motion of laminated composite plate are solved via GDQM and Newton–Raphson method. Variations of stresses and displacements versus time and volume fraction of the fibers are shown for laminated composite plates with different boundary conditions.     

Thermal degradation behavior and kinetic studies of polyacrylamide gel in TiO2 nanoparticles synthesis

Polyacrylamide gel (PAMG) method is a simple, fast and cheap method used for the synthesis of a wide variety of nanopowders. However, no adequate results have been reported on the thermal degradation behavior of PAMG which can be very effective on the final product properties. In this work, thermal degradation behavior of PAMG in the presence of TiCl₄ as a precursor salt for synthesis of TiO₂ nanoparticles was examined in comparison with linear polyacrylamide (LPAM) and pure PAMG by thermogravimetry/differential thermal analysis. Their thermal degradation kinetics was investigated, as well. The results showed that thermal degradation of all samples occurred in two stages at different onset temperatures. Despite the high thermal stability of pure PAMG compared to LPAM, the presence of TiCl₄ as a mineral material in PAMG structure decreases the thermal degradation onset temperature, considerably. Furthermore for LPAM and PAMG, majority of weight loss occurs in the second stage, but in PAMG with TiCl₄ the weight loss occurs mainly at the first stage. For more detailed investigation, residual materials were characterized by Fourier transform infrared spectroscopy and X-ray diffraction (XRD) techniques, attributing this trend to the presence of mineral materials in PAMG structure. XRD and transmission electron microscopy were also applied to confirm anatase crystalline structure and nanoscale distribution of the TiO₂ particles synthesized via PAMG method.     

MFLP: a low power encoding for on chip networks

Network on chip (NoC) has been proposed as an appropriate solution for today’s on-chip communication challenges. Power dissipation has become a key factor in the NoCs because of their shrinking sizes. In this paper, we propose a new encoding approach aimed at power reduction by decreasing the number of switching activities on the buses. This approach assigns the symbols to data word in such a way that the more frequent words are sent by less power consumption. This algorithm dedicates the symbols with less ones to high probability data and uses transition signaling to transmit data. The proposed method, unlike the existing low power encoding, does not rely on spatial redundancy and keeps the width of the bus constant. Experimental evaluations show that our approach reduces the power dissipation up to 46 % with 2.70, 0.51, and 15.43 % power, critical path and area overhead in the NoCs, respectively.     

Effects of aluminium nitride silane-treatment on the mechanical and thermal properties of polybenzoxazine matrix

A new kind of polymer composite, produced from the typical polybenzoxazine and 0–30 wt-% native and silane-treated aluminium nitride (T-AlN), was investigated. The mechanical tests revealed a significant increase in the microhardness and flexural properties upon adding the T-AlN particles compared to that obtained from the untreated ones. By adding 0–30 wt-% T-AlN, the tensile moduli were accurately reproduced by the Halpin-Tsai and Nielsen models. At 30 wt-% T-AlN, dynamic mechanical analysis showed a significant increase in the storage moduli and the glass transition temperature (T_g), reaching 3.2?GPa and 217°C, respectively. The thermal stability of these materials was significantly improved upon the addition of the T-AlN fillers. These improvements are attributed to the high thermal and mechanical properties of the fillers and their good dispersion and adhesion in and to the matrix as revealed by a morphological analysis.     

Isogeometric level set topology optimization for elastoplastic plane stress problems

International Journal of Mechanics and Materials in Design - This article aims to utilize IsoGeometric analysis (IGA) and Level set method for topology optimization of elastoplastic plane stress...     

Synthesis of highly isotactic poly 1-hexene using Fe-doped Mg(OEt)2/TiCl4/ED Ziegler–Natta catalytic system

In this article, polymerization of 1-hexene with FeCl_3-doped Mg(OET)₂/TiCl₄/electron donor (ED) catalytic system is presented. For this purpose, first a number of TiCl₄ catalysts supported on Mg(OEt)₂ and Fe-doped Mg(OEt)₂ supports were prepared with ethylbenzoate or dibutylphthalate as the internal EDs. After successive catalysts synthesis, they were employed in 1-hexene polymerization using cyclohexyl methyl dimethoxysilane as external ED as well as without it. The catalysts activity and molecular weight distribution (MWD) of poly 1-hexenes (PHs) were influenced strongly by both FeCl₃ doping and donor presence so that a remarkable increase in the catalyst activity was seen in doped catalysts. Deconvolution of MWD curves revealed that increase in the type of active centers by introducing FeCl₃ into the support should be responsible for the broadening of MWD of PHs. ¹³CNMR analysis indicated that while isotacticity does not change considerably by Fe doping, EDs increase its amount as high as 8–21%. Second, the stereoselective behavior of active Ti species in doped and undoped catalysts was fully explored by molecular modeling using density functional theory (DFT) method. Finally, with the aid of rheological measurements, the processability of polymers were evaluated and then the gel permeation chromatography (GPC) results were approved through the values obtained from model fitting as well as changes in moduli crossover modulus.     

The influence of heterogeneous meninges on the brain mechanics under primary blast loading

In the modeling of brain mechanics subjected to primary blast waves, there is currently no consensus on how many biological components to be used in the brain–meninges–skull complex, and what type of constitutive models to be adopted. The objective of this study is to determine the role of layered meninges in damping the dynamic response of the brain under primary blast loadings. A composite structures composed of eight solid relevant layers (including the pia, cerebrospinal fluid (CSF), dura maters) with different mechanical properties are constructed to mimic the heterogeneous human head. A hyper-viscoelastic material model is developed to better represent the mechanical response of the brain tissue over a large strain/high frequency range applicable for blast scenarios. The effect of meninges on the brain response is examined. Results show that heterogeneous composite structures of the head have a major influence on the intracranial pressure, maximum shear stress, and maximum principal strain in the brain, which is associated with traumatic brain injuries. The meninges serving as protective layers are revealed by mitigating the dynamic response of the brain. In addition, appreciable changes of the pressure and maximum shear stress are observed on the material interfaces between layers of tissues. This may be attributed to the alternation of shock wave speed caused by the impedance mismatch.     

Energy use efficiency and economical analysis of almond production: a case study in Chaharmahal-Va-Bakhtiari province,Iran

The aim of this study was to analyse input–output energy and economical assessment of almond production in three age groups of orchards (group I 6–10, group II 11–15 and group III 16–20 years old) in Chahrmahal-Va-Bakhtiari province, Iran. Data for almond production were collected by administering questionnaire in face-to-face interviews from the orchards selected based on random sampling method during a 3-year period. The results showed that 57,027.13, 60,341.14 and 61,640.43 MJ ha^?1 energy was consumed by group I, group II and group III, respectively. The most energy input was consumed by electricity, followed by chemical fertilizer. Energy indices were calculated, and the results revealed that energy efficiency was 0.62, 1.12 and 0.81 in the triple groups of orchards, respectively. Economical assessment showed that total production cost of almond in group I, II and III was $4547.54, $5799.26 and $5687.05 ha^?1, respectively. In all orchard groups, the shares of variable and fixed production costs found to be same nearly. Net return for almond production was $14,516.22, $30,735.19 and $21,395.57ha^?1, respectively. According to the research results, it was concluded that although almond production in the study region was not an efficient process in terms of energy consumption, it was a profitable agricultural operation.