Using the Mass Method to Produce PVC/Clay Nanocomposite Foams: The Effect of Nano-clay and Foaming Conditions on Density and Cell size

Nanocomposite foams contain very fine cells because of the fillers in nano scale. Due to the limited size of the cells, the mechanical and physical properties of nanocomposite foams are improved compared to polymer foams. In this study PVC/clay nanocomposite foams containing various concentrations of nano-clay (1, 3 and 5 phr) were successfully prepared. The samples were placed under CO₂ gas pressure at 5 MPa, by immersing in glycerin bath at 60, 70, 80 °C and 20, 30, 40 s, respectively, to form foams. The density and the cell size as a factor of nano-clay content, foaming time and temperature were investigated using Archimedes method and scanning electron microscopy, respectively. The minimum density was obtained in the sample containing 1 phr nanoclay prepared at 80 °C and 40 s. The minimum cell size was related to the sample containing 5 phr nanoclay at 60 °C and 20 s.     

Study of inhibition effect of carboxylic salt derivative on corrosion of C1010 carbon steel in saline solution

In the present work, sodium 4-[(4-formylbenzylidene) amino] benzoiate (4) was synthesized and its structure was confirmed using spectroscopic techniques. Prepared compound was successfully applied as a corrosion inhibitor for C1010 carbon steel in 3.5% NaCl solution at 25°C. Different electrochemical measurements such as linear polarization resistance (LPR), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) were used to evaluate the suggested inhibitor (4). The results of different electrochemical measurements show that inhibition efficiencies obtained from EIS curves are in consistence with the results of potentiodynamic polarization and LPR measurements due to increase corrosion inhibition efficiency by increasing the concentration of organic inhibitor (4). Semi-empirical calculations with PM3 method were used to find relationship between molecular structure and inhibiting effect of suggested inhibitor (4).     

Removal of ciprofloxacin from aqueous solution by a continuous flow electro-coagulation process

This study deals with the performance and modeling of the electro-coagulation process for ciprofloxacin (CIP) removal by using aluminum electrode as anode in a continuous electrochemical reactor. The initial pH, temperature, current density, time and flow rate were selected as independent variables in response surface methodology (RSM) involving a five-level central composite design (CCD), while CIP removal efficiency was considered as the response function. The result of optimization showed that the maximum amount of CIP removal efficiency (88%) presented at the optimal condition of pH=5.6, t=100min, T=25.5 °C, I=5.6mA/cm² and V=25.9 mL/min. In addition, the mineralization of the CIP was investigated by chemical oxygen demand (COD) and total organic carbon (TOC) measurements that showed 77% COD removal and 49%TOC removal.     

Synthesis and characterization of diethyl-dithiocarbamic acid 2-[4-(2-diethylthiocarbamoylsulfanyl-2-phenyl-acetyl)-2,5-dioxo-piperazin-1-yl]-2-oxo-1-phenyl-ethyl ester as new reversible addition-fragmentation chain transfer agent for polymerization of ethyl methacrylate

Diethyl-dithiocarbamic acid 2-[4-(2-diethylthiocarbamoylsulfanyl-2-phenyl-acetyl)-2,5-dioxo-piperazin-1-yl]-2-oxo-1-phenyl-ethyl ester as a novel di-functional reversible addition–fragmentation chain transfer (RAFT) agent was synthesized based on 2,5-diketopiperazine. The RAFT agent was designed based on the propagating core (R group) approach and characterized by ¹H NMR, ¹³C NMR, FT-IR, elemental analysis, and melting point technique. Then, ethyl methacrylate was synthesized via free radical and RAFT polymerizations. To investigate the effect of the RAFT agent on the kinetic of polymerization, molecular weight, and polydispersity index (PDI) of polymers and also monomer conversion were monitored. Also, synthesized polymers were characterized by ¹H NMR, ¹³C NMR, FT-IR, and TGA. Characterization analyses of synthesized RAFT agent were consistent with the structure. NMR and FTIR analyses confirmed end group incorporation of RAFT agent into polymer structure. According to results, poly(ethyl methacrylate) with low PDI (1.14) was obtained. Kinetic study indicated well-controlled polymerization of ethyl methacrylate by synthesized RAFT agent. TGA results showed that RAFT agent could reduce termination reactions and so reduce head-to-head bonds and chain-end unsaturation by keeping the concentration of radicals low enough.     

Protein Kinases and Parkinson’s Disease

Currently, the lack of new drug candidates for the treatment of major neurological disorders such as Parkinson’s disease has intensified the search for drugs that can be repurposed or repositioned for such treatment. Typically, the search focuses on drugs that have been approved and are used clinically for other indications. Kinase inhibitors represent a family of popular molecules for the treatment and prevention of various cancers, and have emerged as strong candidates for such repurposing because numerous serine/threonine and tyrosine kinases have been implicated in the pathobiology of Parkinson’s disease. This review focuses on various kinase-dependent pathways associated with the expression of Parkinson’s disease pathology, and evaluates how inhibitors of these pathways might play a major role as effective therapeutic molecules.     

Drainage potential of degraded railway ballast considering initial gradation and intrusion of external fine materials

The aggregate in the ballast layer of the railway track structure degrades due to the splitting of single particles and the abrasion of the angular corners, resulting in a ballast course comprised of degraded aggregate with a lower drainage potential. In the present study, the hydraulic conductivity of clean, degraded and clay-fouled degraded ballast specimens was evaluated considering the initial particle size distribution of aggregate and the degradation mechanism to investigate the permeability of ballast fouled by both internal and external factors. First, degraded ballast aggregate was generated by using a large-scale impact loading testing apparatus. Then, a large-scale constant head permeability test was performed to estimate the hydraulic conductivity of degraded ballast aggregate contaminated with clay. Based on the obtained results, the flow regime through extremely degraded ballast remained between a completely turbulent regime (observed in the case of clean ballast) and a laminar flow regime. Darcy’s law was shown to be valid for degraded aggregate samples contaminated with clay. While the degradation of the aggregate had the expected effect of reducing hydraulic conductivity, the abrasion of asperities was shown to have an even greater impact on hydraulic conductivity. Also, the further degradation of aggregate under impact loading was shown to accelerate the reduction in the permeability of clay-fouled degraded ballast to an unacceptable extent.     

Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger

Heat exchangers are integral parts of important industrial units such as petrochemicals, medicine and power plants. Due to the importance of systems energy consumption, different modifications have been applied on heat exchangers in terms of size and structure. In this study, a novel heat exchanger with helically grooved annulus shell and helically coiled tube was investigated by numerical simulation. Helically grooves with the same pitch of the helical coil tube and different depth are created on the inner and outer wall of annulus shell to improve the thermal performance of heat exchanger. In the first section, thermal performance of the shell and coil heat exchanger with the helical grooves on its outer shell wall was compared with same but without helical grooves. At the second section, helically grooves created on both outer and inner wall of the annulus shell with different groove depths. The results showed that the heat exchanger with grooves on both inner and outer shell wall has better thermal performance up to 20% compared to the heat exchanger with grooves on only outer shell wall. The highest thermal performance achieves at lower flow rates and higher groove depths whereas the pressure drop did not increase significantly.     

A novel stimuli-responsive magnetic hydrogel based on nature-inspired tragacanth gum for chemo/hyperthermia treatment of cancerous cells

Journal of Polymer Research - Derivatives of formyl pyrazole were synthesized by the reaction of acetophenone, 4-methyl acetophenone, 3-acetyl furan, 3-acetyl thiophen and phenyl hydrazine...     

Use of a selective extractant-impregnated resin for removal of Pb(II) ion from waters and wastewaters: Kinetics,equilibrium and thermodynamic study

Adsorption of Pb(II) ion by a novel extractant-impregnated resin, EIR, was studied as a function of various experimental parameters using batch adsorption experiments. The new EIR was prepared by impregnating gallocyanine (GCN) onto Amberlite XAD-16 resin beads. The EIR was characterized by nitrogen analysis and SEM micrographs. The new EIR showed excellent selectivity factor values (α) for Pb(II) adsorption respect to other metal ions. The effects of some chemical and physical variables were evaluated and the optimum conditions were found for Pb(II) removal from aqueous solutions. The equilibrium adsorption isotherm was fitted with the Langmuir adsorption model. The maximum adsorption capacity (q_max) of EIR for Pb(II) ions was found to be 367.92 mg g⁻¹. The kinetic studies showed that the intra-particle diffusion is the rate-controlling step. Also, the intra-particle diffusion coefficients, D_ip values, were of the order of 10⁻¹² m² s⁻¹. The values of enthalpy (ΔH°) were positive, which confirms the endothermic nature of adsorption process. Also, the positive entropy changes (ΔS°) were showed that the randomness increased along with the adsorption process. In addition, the obtained negative values of Gibbs free energy (ΔG°) indicated feasible and spontaneous nature of the adsorption process at different temperatures. The new adsorbent was very stable so that it can be successfully used for many consecutive cycles without significant loss in its adsorption capacity.     

Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.