Design improvements on rotary valve particle feeders used for obtaining suspended airflows

The back repulsion of low density particles, sticking of particles in feeder valve and interlocking and cohesive archs of particles in feeder hopper have been widely observed problems of a conventional rotary valve feeder used for feeding of granular particles into an airflow line. In this study, these problems of the rotary valve feeders were isolated by means of novel modifications to its conventional design. Results of the modifications showed that the modified feeder can be sensitively used to feed granular particles with mass feeding rates ranging between 5±0.15 and 85±0.85 g/s without encountering problems experienced with conventional rotary valves.     

Use of Warranties on Highway Projects: A Real Option Perspective

Since the introduction of warranty provisions in federal highway jobs, more and more state departments of transportation (DOTs) have considered the use of such provisions to protect their initial investment. This paper describes the pros and cons of warranty contracting in highway construction based on a survey of warranty practices in the United States. In particular, the need for state DOTs to buy a warranty for a well-built project is questioned. As an alternative, this paper introduces the warranty option, which gives the DOT the right to buy a warranty only if it becomes necessary at the end of construction. This option is exercised if the performance on site warrants it. This paper describes the mechanics of the warranty option and its advantages over the conventional warranty. A bid evaluation model is also developed for the warranty option approach.     

Methacrylic acid–acrylamide-g-poly(ethyleneterephthalate) fibres for urea hydrolysis

This paper presents the results of urease immobilization onto methacrylic acid–acrylamide grafted poly(ethyleneterephthalate) fibres. The graft yield strongly affected the maximum activity of the immobilized enzyme up to a value of 70·2%. Higher grafting caused a decline in urease activity and led to the degradation of the fibres. The minor changes observed in K_m and V_max demonstrated that the conformational changes existed during immobilization were not extensive. However, 70·2% methacrylic acid–acrylamide-g-fibres containing urease were more stable towards acidic and alkaline pH, high temperature and storage conditions compared with free enzyme. Apart from the increase in stability to heat inactivation, the initial enzymatic activity of the urease–fibre system remained almost unchanged even after 40 repeated assays corresponding to 10 h of operation in 4 months, indicating the excellent durability of the system.     

Synthesis of artificial neural networks by transconductors only

Hardware implementation of artificial neural networks has been attracting great attention recently. In this work, the analog VLSI implementation of artificial neural networks by using only transconductors is presented. The signal flow graph approach is used in synthesis. The neural flow graph is defined. Synthesis of various neural network configurations by means of neural flow graph is described. The approach presented in this work is technology independent. This approach can be applied to new neural network topologies to be proposed or used with transconductors designed in future technologies.     

Extracting trust information from security system of a service

The issue of trust is a research problem in emerging open environments, such as ubiquitous networks. Such environments are highly dynamic and they contain diverse number of services and autonomous entities. Entities in open environments have different security needs from services. Trust computations related to the security systems of services necessitate information that meets needs of each entity. Obtaining such information is a challenging issue for entities. In this paper, we propose a model for extracting trust information from the security system of a service based on the needs of an entity. We formally represent security policies and security systems to extract trust information according to needs of an entity. The formal representation ensures an entity to extract trust information about a security property of a service and trust information about whole security system of the service. The proposed model is applied to Dental Clinic Patient Service as a case study with two scenarios. The scenarios are analyzed experimentally with simulations. The experimental evaluation shows that the proposed model provides trust information related to the security system of a service based on the needs of an entity and it is applicable in emerging open environments.     

Uncertainty modeling and robust minimax LQR control of multivariable nonlinear systems with application to hypersonic flight

For a class of multi‐input and multi‐output nonlinear uncertainty systems, a novel approach to design a nonlinear controller using minimax linear quadratic regulator (LQR) control is proposed. The proposed method combines a feedback linearization method with the robust minimax LQR approach in the presence of time‐varying uncertain parameters. The uncertainties, which are assumed to satisfy a certain integral quadratic constraint condition, do not necessarily satisfy a generalized matching condition. The procedure consists of feedback linearization of the nominal model and linearization of the remaining nonlinear uncertain terms with respect to each individual uncertainty at a local operating point. This two‐stage linearization process, followed by a robust minimax LQR control design, provides a robustly stable closed loop system. To demonstrate the effectiveness of the proposed approach, an application study is provided for a flight control problem of an air‐breathing hypersonic flight vehicle (AHFV), where the outputs to be controlled are the longitudinal velocity and altitude, and the control variables are the throttle setting and elevator deflection. The proposed method is used to derive a linearized uncertainty model for the longitudinal motion dynamics of the AHFV first, and then a robust minimax LQR controller is designed, which is based on this uncertainty model. The controller is synthesized considering seven uncertain aerodynamic and inertial parameters. The stability and performance of the synthesized controller is evaluated numerically via single scenario simulations for particular cruise conditions as well as a Monte‐Carlo type simulation based on numerous cases. It is observed that the control scheme proposed in this paper performs better, especially from the aspect of robustness to large ranges of uncertainties, than some controller design schemes previously published in the literature. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

A new ECG beat clustering method based on kernelized fuzzy c-means and hybrid ant colony optimization for continuous domains

The kernelized fuzzy c-means algorithm uses kernel methods to improve the clustering performance of the well known fuzzy c-means algorithm by mapping a given dataset into a higher dimensional space non-linearly. Thus, the newly obtained dataset is more likely to be linearly seprable. However, to further improve the clustering performance, an optimization method is required to overcome the drawbacks of the traditional algorithms such as, sensitivity to initialization, trapping into local minima and lack of prior knowledge for optimum paramaters of the kernel functions. In this paper, to overcome these drawbacks, a new clustering method based on kernelized fuzzy c-means algorithm and a recently proposed ant based optimization algorithm, hybrid ant colony optimization for continuous domains, is proposed. The proposed method is applied to a dataset which is obtained from MIT–BIH arrhythmia database. The dataset consists of six types of ECG beats including, Normal Beat (N), Premature Ventricular Contraction (PVC), Fusion of Ventricular and Normal Beat (F), Artrial Premature Beat (A), Right Bundle Branch Block Beat (R) and Fusion of Paced and Normal Beat (f). Four time domain features are extracted for each beat type and training and test sets are formed. After several experiments it is observed that the proposed method outperforms the traditional fuzzy c-means and kernelized fuzzy c-means algorithms.     

An artificial neural network model for the effects of chicken manure on ground water

In the areas where broiler industry is located, poultry manure from chicken farms could be a major source of ground water pollution, and this may have extensive effects particularly when the farms use nearby ground water as their fresh water supply. Therefore the prediction the extent of this pollution, either from rigorous mathematical diffusion modeling or from the perspective of experimental data evaluation bears importance. In this work, we have investigated modeling of the effects of chicken manure on ground water by artificial neural networks. An ANN model was developed to predict the total coliform in the ground water well in poultry farms. The back-propagation algorithm was employed for training and testing the network, and the Levenberg-Marquardt algorithm was utilized for optimization. The MATLAB 7.0 environment with Neural Network Toolbox was used for coding. Given the associated input parameters such as the number of chickens, type of manure pool management and depth of well, the model estimates the possible amount of total coliform in the wells to a satisfactory degree. Therefore it is expected to be of help in future for estimating the ground water pollution resulting from chicken farms.     

Optimum topology design of various geometrically nonlinear latticed domes using improved harmony search method

Domes are elegant and economical structures used in covering large areas. They are built in various forms. According to their form, they are given special names such as lamella, network, and geodesic domes. In this paper, optimum topological design algorithm is presented that determines the optimum number of rings, the optimum height of crown and tubular section designations for the member groups of these domes. The design algorithm developed has a routine that generates the data required for the geometry of these domes automatically. The minimum weight of each dome is taken as the objective function. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design–American Institute of Steel Constitution). The optimum topological design problem that considers these constraints turns out to be discrete programming problem. Improved harmony search algorithm is suggested to determine its optimum solution. The design algorithm also considers the geometric nonlinearity of these dome structures. Design examples are presented to demonstrate the effectiveness and robustness of the design optimization algorithm developed.