Phenolic profiles of Turkish olives and olive oils

Phenolic compound distribution of Turkish olive cultivars and their matching olive oils together with the influence of growing region were investigated. One hundred and one samples of olives from 18 cultivars were collected during two crop years from west, south and south‐east regions of Turkey. The olives were processed to oils and both olive and olive oil samples were evaluated for their phenolic compound distribution. The results have shown that main phenolics of Turkish olives were tyrosol, oleuropein, p‐coumaric acid, verbascoside, luteolin 7‐O‐glucoside, rutin, trans cinnamic acid, luteolin, apigenin, cyanidin 3‐O‐glucoside and cyanidin 3‐O‐rutinoside. Oleuropein and trans cinnamic acid were present in higher amounts among all phenolics. Principal component analyses showed that the growing region did not have drastic effect on phenolic profile of olives. The major phenolic compounds of olive oils were tyrosol, syringic acid, p‐coumaric acid, luteolin‐7‐O‐glucoside, trans cinnamic acid, luteolin and apigenin. Luteolin is a predominant phenolic compound in almost all oil samples. Total phenol concentrations of Southeast Anatolian oils were found to be lower than those of the other regions.     

Potassium persulfate-mediated preparation of conducting polypyrrole/polyacrylonitrile composite fibers: Humidity and temperature-sensing properties

Conducting polypyrrole (PPy)/polyacrylonitrile (PAN) composite fibers were prepared by the polymerization of pyrrole in the presence of PAN fibers with potassium persulfate in an acidic aqueous solution. We obtained composite fibers containing concentrations of PPy as high as 1.14% and having surface resistivities as low as 0.6 kΩ/cm² by changing the polymerization parameters, including the temperature and concentrations of pyrrole and oxidant. The tensile strength of 10.02 N/m² and breaking elongation of 32.68% for the pure PAN fiber increased up to 10.45 N/m² and 33.23%, respectively, for the composite fiber containing 0.13% PPy. The change in the resistivity of the PPy/PAN composite fiber during heating–cooling cycles in the temperature range of +5 to 120°C was examined. Scanning electron microscopy and optical microscopy images of the composite fibers showed that the PPy coating was restricted to the surfaces of the PAN fibers. Surface resistivity measurements, Fourier transform infrared spectroscopy, and thermogravimetric analysis techniques were also used to characterize the composite fibers. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Treatment of phenol formaldehyde production wastewater by electrooxidation-electrofenton successive processes

ABSTRACT

Treatments of phenol formaldehyde producing wastewater (PFPW) by electrooxidation (EO) and electro-Fenton (EF) successive processes were carried out in a batch electrolytic reactor using graphite (Gr) and stainless steel (Ss) electrodes. After the completion of the EO process, the wastewater was further treated with EF process. The influence of operating variables such as current density, operating time, initial pH_i and H₂O₂ concentration was evaluated for removals of phenol, TOC and COD in PFPW. Gr/Gr, Gr/Ss or Ss/Ss and Ss/Gr electrode pair were used as anode and cathode. The best removal efficiency in the EO process was obtained with Gr/Gr (93%) as compared to Gr/Ss (82%), Ss/Ss (63%) and Ss/Gr (55%). The removal efficiencies for the EO process using Gr-Gr electrode pair were obtained as 93% for phenol, 61% for COD and 44% for TOC at initial pH_i 7,5 g/L of NaCl, 50 mA/cm² and 5 h. In the EF process, the removal efficiencies at pH_i 3,5 mA/cm² and 30 mM H₂O₂ and 45 min were 100% for phenol, 76% for COD and 59% for TOC. This study provided that the successive processes are an effective method for the removal of phenolic compounds from the wastewater.     

Determining Frying Oil Degradation by Near Infrared Spectroscopy Using Chemometric Techniques

A rapid method for the determination of some important physicochemical properties in frying oils has been developed. Partial least square regression (PLS) calibration models were applied to the physicochemical parameters and near infrared spectroscopy (NIR) spectral data. PLS regression was used to find the NIR region and the data pre-processing method that give the best prediction of the chemical parameters. Calibration and validation were appropriated by leave one out cross validation and test set validation techniques for predicting free fatty acids (FFA), total polar materials (cTPM; measured by chromatographic method and iTPM measured by an instrumental method), viscosity and smoke point of the frying oil samples. For PLS models using the cross validation techniques, the best correlations (r) between NIR predicted data and the standard method data for iTPM in oils were 93.79 and root mean square error of prediction (RMSEP) values were 5.53. For PLS models using the test set validation techniques, the best correlations (r) between NIR predicted data and standard method data for FFA, cTPM, viscosity and smoke point in oils were 92.58, 94.61, 81.95 and 84.07 and RMSEP values were 0.121, 3.96, 22.30 and 8.74, respectively. In conclusion, NIR technique with chemometric analysis was found very effective in predicting frying oil quality changes.     

Switchable Fluorescence of Doxorubicin for Label-Free Imaging of Bioorthogonal Drug Release

Monitoring the release and activation of prodrug formulations provides essential information about the outcome of a therapy. While the prodrug delivery can be confirmed by using different imaging techniques, confirming the release of active payload by using imaging is a challenge. Here, we have discovered that the switchable fluorescence of doxorubicin can validate drug release upon its uncaging reaction with a highly specific chemical partner. We have observed that the conjugation of doxorubicin with a trans-cyclooctene (TCO) diminishes its fluorescence at 595 nm. This quenched fluorescence of the doxorubicin prodrug is recovered upon its bond-cleaving reaction with tetrazine. Clinically assessed iron oxide nanoparticles were used to formulate a doxorubicin nanodrug. The release of doxorubicin from the nanodrug was studied under various experimental conditions. A fivefold increase in doxorubicin fluorescence is observed after complete release. The studies were carried out in vitro in MDA-MB-231 breast cancer cells. An increase in Dox signal was observed upon tetrazine administration. This switchable fluorescence mechanism of Dox could be employed for fundamental studies, that is, the reactivity of various tetrazine and TCO linker types under different experimental conditions. In addition, the system could be instrumental for translational research where the release and activation of doxorubicin prodrug payloads can be monitored by using optical imaging systems.     

Development of ductile green flame retardant poly(lactic acid) composites using hydromagnesite&huntite and bio-based plasticizer

Turning brittle poly(lactic acid) (PLA) to ductile form via plasticizer inclusion is an effective option in the case of processing with high amounts of additives. Additionally, the integration of natural flame retardants to PLA involving bio-based plasticizer enables to use of environmentally friendly composites in conditions where fire resistance performance is required. In the current study, ductile green fire retardant PLA composites were manufactured using hydromagnesite&huntite (HH) as a natural fire retardant additive and acetyl tributyl citrate as a bio-based plasticizer. The influences of plasticizer and HH contents on the fire retardant, thermal and mechanical performances of the composites were explored. According to test results, the limiting oxygen index (LOI) value of PLA reduced from 29.2 to 28.0 and the UL-94 V rating changed from V2 to BC with the addition of 20 wt% plasticizer owing to the reduction in melt viscosity. The peak heat release rate (pHRR) and average heat release rate (avHRR) values increased steadily as the concentration of plasticizer increased due to the formation of a more porous residue structure stemming from the increased transportation rate of gases. In order to produce ductile flame retardant material, the plasticizer content was required to 20 wt% of HH. The highest LOI value (36.2) and UL-94 rating of V0 were achieved with the inclusion of 70 wt% HH in the presence of 20 wt% plasticizer. Improvement in impact resistance and reduction in tensile strength were observed as the added amount of plasticizer increased.     

Determination of the quality and purity characteristics of olive oils obtained from different regions of Turkey,depending on climatic changes

Virgin olive oils (VOOs) obtained from olives grown in different regions of Turkey under changing climatic conditions sometimes show different sensory and chemical properties. This study was planned to determine whether these deviations are due to climatic changes or not. For this purpose, five different olive varieties (Ayvalık, Memecik, Gemlik, Nizip Yağlık, Kilis Yağlık) of commercial importance were harvested from the provinces/districts (four different region) where cultivation is intense during the 2017/2018–2020/2021 harvest years. Every year, olive samples were collected from 3 orchards from 13 provinces/districts. One hundred and fifty-six samples were subjected to the purity, quality and sensory analysis. Basic climatic values (average, minimum and maximum temperature, humidity and precipitation) were examined for four consecutive years. All of the examined olive oil samples were determined within the legal limits in terms of fatty acid composition and fatty acid ethyl ester values. However, delta-7-stigmastenol value from the sterol composition was found to be above 0.5% in some samples in all the years studied (total 21 samples). Delta-7-stigmastenol values of olive oil samples varied between 0.16% and 1.14%. Multiple linear regression analysis was applied using a genetic algorithm-based inverse least squares method to determine whether there is a relationship between climate data and delta-7-stigmastenol values. According to this result, it has been determined that the delta-7-stigmastenol value is high when the annual average relative humidity is low and the annual average temperature is high. There is an urgent need to make forward-looking plans due to climate change.     

Plasma surface modification of graphene oxide nanosheets for the synthesis of GO/PES nanocomposite ultrafiltration membrane for enhanced oily separation

In this study, two different monomers, namely hexafluorobutyl acrylate (HFBA) and diethylaminoethyl methacrylate (DEAEMA) were individually used to modify graphene oxide (GO) nanosheets via environmentally friendly plasma enhanced chemical vapor deposition (PECVD) method. The results from instrumental analyses confirmed the successful deposition of respective functional material onto the nanomaterials. Modified GOs were used as the nano-fillers to develop composite polyethersulfone (PES) ultrafiltration (UF) membrane with improved surface properties for oily solution treatment. All the developed membranes were characterized with a series of analytical instruments to support the findings of membrane filtration performance. The results indicated that the membrane incorporated with DEAEMA-GOs (coated with hydrophilic polymer) could achieve better results in terms of oil rejection, antifouling resistance and water recovery rate than the membrane incorporated with HFBA-GOs (coated with hydrophobic polymer). This is due to the reduced agglomeration between modified GOs as well as better interaction of hydrophilic-coated GOs with polymer membrane. Compared to the pure water flux of the membrane incorporated with unmodified GO, the membrane incorporated with DEAEMA-GO achieve approximately 85% higher value with oil removal rate remained almost unchanged (98.94% rejection).     

Effect of roasting on the physico-chemical properties,fatty acids,polyphenols and mineral contents of tobacco (Nicotiana tabacum L.) seed and oils

The physico-chemical properties, phytochemicals, mineral contents of tobacco (Nicotiana tabacum L.) seeds grown at Samsun province in Turkey were evaluated. The oil contents of tobacco seeds ranged from 20.6% (control) to 29.0% (microwave-roasted). L*, a* and b* values of tobacco seeds ranged from 32.38 to 35.61; from 6.32 to 6.78; from 13.72 to 14.27, respectively. Total phenolic contents of tobacco seed extract and oils were reported between 31.02 (oven-roasted) and 34.42 mg GAE/100 g (microwave-roasted) to 4.60 (microwave-roasted) and 6.45 mg GAE/100 g (oven-roasted), respectively. Total flavonoid values of raw and roasted tobacco seed extract and oils were determined between 26.62 (oven) and 67.10 mg/100 g (control) to 21.57 (control) and 44.71 mg/100 g (microwave-roasted), respectively. Gallic acid, 3,4-dihydroxybenzoic acid and catechin are the predominant phenolic components of raw and roasted tobacco seed oils. The amounts of oleic and linoleic acid in raw and roasted tobacco seed oils ranged from 10.23% (oven-roasted) to 12.48% (control) and 73.72% (control) to 76.63% (oven-roasted), respectively. The abundant elements found in seeds were K, P, Ca, Mg, S and Fe. The mineral amounts of the roasted seeds were found higher than that of the control. The highest increase was detected in oven roasted tobacco seeds.     

Grafting of poly(ethylene terephthalate) fibers with methacrylic acid using benzoyl peroxide

The graft copolymerization of methacrylic acid onto poly(ethylene terephthalate) fibers, by the aid of benzoyl peroxide, have been investigated. The graft yield increased up to 85°C, and then decreased with the further increase in temperature. The maximum graft yield was obtained at benzoyl peroxide concentration of 4.0 × 10^?3 mol/L. The increase in the concentration of monomer was found to increase the graft yield. The change in the graft yield was followed by the experiments carried out using different water/solvent mixtures. Also, the change in the properties of polye (thylene terephthalate) fibers grafted with methacrylic acid such as moisture regain, density, and diameter were investigated.