Effect of Sintering on Magnetic Properties of Ni0.55Zn0.45Fe2O4

Bulk Ni_0.55Zn_0.45Fe₂O₄ samples were obtained by sintering their nanopowder at 1100 ^°C, 1200 ^°C, and 1300 ^°C. Improvement in crystallinity on sintering was identified from increase in intensity of the XRD peaks and grain development in SEM micrographs. Saturation magnetization increased from 81.7 emu/g to 85.3 emu/g as the sintering temperature increased from 1100 ^°C to 1300 ^°C. Initial permeability increases whereas the relative loss factor, resonance frequency, and DC resistivity decreases with increasing the sintering temperature. Curie temperatures obtained from low field AC normalized susceptibility and permeability measurements are in good agreement. The DC resistivity of the samples in the present case is two orders higher than the reported values of samples prepared using conventional ceramic method.     

Utilization of green seed canola oil for in situ epoxidation

Green seed canola oil is underutilized for edible purposes due to its high chlorophyll content, which makes it more susceptible to photo‐oxidation and ultimately reduces the oxidation stability. The present work is an attempt to compare the kinetics of epoxidation of crude green seed canola oil (CGSCO) and treated green seed canola oil (TGSCO) with peroxyacids generated in situ in presence of an Amberlite IR‐120 acidic ion exchange resin (AIER) as catalyst. Among the two oxygen carrier studied, acetic acid was found to be a better carrier than the formic acid, as it gives 8% more conversion of double bond than the formic acid. A detailed process developmental study was then performed with the acetic acid/AIER combination. For the oils under investigation parameters optimized were temperature (55°C), hydrogen peroxide to double bond molar ratio (2.0), acetic acid to double bond molar ratio (0.5), and AIER loading (15%). An iodine conversion of 90.33, 90.20%, and a relative epoxide yield of 90, 88.8% were obtained at the optimum reaction conditions for CGSCO and TGSCO, respectively. The formation of the epoxide product of CGSCO and TGSCO was confirmed by Fourier Transform IR Spectroscopy (FTIR) and NMR (1H NMR) spectral analysis.     

Service life prediction of organic coatings: electrochemical impedance spectroscopy vs actual service life

Electrochemical impedance spectroscopy (EIS) is used to derive an expression for predicting the service life of organic coating in a C4-type environment (industrial and costal areas with moderate salinity) as defined in ISO 12944 standard for paints and varnishes—corrosion protection of steel structures by protective paint systems. Three coating systems with a record of 2, 5, and 10 years of durability were selected for the study. The selection was also based on proven composition and dry film thickness (DFT) of the coatings as per ISO 12944. Electrochemical impedance measurements of the paint-coated panels were carried out by exposing the coated mild steel panels without scribe in different corrosive environments such as immersion in NaCl solution, neutral salt spray, etc. Neutral salt spray exposure was found to be the most severe corrosive environment among all the three coating systems. In most of the cases, EIS gave early indication of coating failure when compared to visual defects such as blistering and over-film corrosion.     

Interrogating the catalytic mechanism of nanoparticle mediated Stille coupling reactions employing bio-inspired Pd nanocatalysts

To address issues concerning the global environmental and energy state, new catalytic technologies must be developed that translate ambient and efficient conditions to heavily used reactions. To achieve this, the structure/function relationship between model catalysts and individual reactions must be critically discerned to identify structural motifs responsible for the reactivity. This is especially true for nanoparticle-based systems where this level of information remains limited. Here we present evidence indicating that peptide-capped Pd nanoparticles drive Stille C-C coupling reactions via Pd atom leaching. Through a series of reaction studies, the materials are shown to be optimized for reactivity under ambient conditions where increases in temperature or catalyst concentration deactivate reactivity due to the leaching process. A quartz crystal microbalance analysis demonstrates that Pd leaching occurs during the initial oxidative addition step at the nanoparticle surface by aryl halides. Together, this suggests that peptide-based materials may be optimally suited for use as model systems to isolate structural motifs responsible for the generation of catalytically reactive materials under ambient synthetic conditions.     

An investigation into transition metal ion binding properties of silk fibers and particles using radioisotopes

Silk is a structural protein fiber that is stable over a wide pH range making it attractive for use in medical and environmental applications. Variation in amino acid composition has the potential for selective binding for ions under varying conditions. Here we report on the metal ion separation potential of Mulberry and Eri silk fibers and powders over a range of pH. Highly sensitive radiotracer probes, ⁶⁴Cu²⁺, ¹⁰⁹Cd²⁺, and ⁵⁷Co²⁺ were used to study the absorption of their respective stable metal ions Cu²⁺, Cd²⁺, and Co²⁺ into and from the silk sorbents. The total amount of each metal ion absorbed and time taken to reach equilibrium occurred in the following order: Cu²⁺ > Cd²⁺ > Co²⁺. In all cases the silk powders absorbed metal ions faster than their respective silk fibers. Intensive degumming of the fibers and powders significantly reduced the time to absorb respective metal ions and the time to reach equilibrium was reduced from hours to 5–15 min at pH 8. Once bound, 45–100% of the metal ions were released from the sorbents after exposure to pH 3 buffer for 30 min. The transition metal ion loading capacity for the silk sorbents was considerably higher than that found for commercial ion exchange resins (AG MP‐50 and AG 50W‐X2) under similar conditions. Interestingly, total Cu²⁺ bound was found to be higher than theoretically predicted values based on known specific Cu²⁺ binding sites (AHGGYSGY), suggesting that additional (new) sites for transition metal ion binding sites are present in silk fibers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Unlocking the Latent Antimicrobial Potential of Biomimetically Synthesized Inorganic Materials

Inspired by biomineralization, biomimetic approaches utilize biomolecules and synthetic analogs to produce materials of controlled chemistry, morphology, and function under relatively benign conditions. A common characteristic of biological and biomimetic mineral‐forming processes is the generation of mineral/biomolecule nanocomposites. In this work, it is demonstrated that a facile chemical reaction may be utilized to halogenate the nitrogen‐containing moieties of the organics entrapped within bio‐inorganic composites to yield halamine compounds. This process provides rapid and potent bactericidal activity to biomimetically and biologically produced materials that otherwise lack such functionality. Additionally, bio‐inorganic composites containing the chlorinated peptide protamine are effective in rapidly neutralizing Bacillus spores (≥99.97% reduction in colony forming units within 10 min). The straightforward nature of the described process, and the efficacy of halamine compounds in neutralizing biological and chemical agents, provide new applicability to biogenic and biomimetic materials.     

Edge Effect Elimination in Single-Mixture Blind Source Separation

Blind source separation (BSS) of single-channel mixed recording is a challenging task that has applications in the fields of speech, audio and bio-signal processing. Ensemble empirical mode decomposition (EEMD)-based methods are commonly used for blind separation of single input multiple outputs. However, all of these EEMD-based methods appear in the edge effect problem when cubic spline interpolation is used to fit the upper and lower envelopes of the given signals. It is therefore imperative to have good methods to explore a more suitable design choice, which can avoid the problems mentioned above as much as possible. In this paper we present a novel single-mixture blind source separation method based on edge effect elimination of EEMD, principal component analysis (PCA) and independent component analysis (ICA). EEMD represents any time-domain signal as the sum of a finite set of oscillatory components called intrinsic mode functions (IMFs). In extreme point symmetry extension (EPSE), optimum values of endpoints are obtained by minimizing the deviation evaluation function of signal and signal envelope. Edge effect is turned away from signal by abandoning both ends’ extension parts of IMFs. PCA is applied to reduce dimensions of IMFs. ICA finds the independent components by maximizing the statistical independence of the dimensionality reduction of IMFs. The separated performance of edge EPSE-EEMD-PCA-ICA algorithm is compared with EEMD-ICA and EEMD-PCA-ICA algorithms through simulations, and experimental results show that the former algorithm outperforms the two latter algorithms with higher correlation coefficient and lower relative root mean square error (RRMSE).     

Compositional dependence on the optical properties of amorphous As2 − xS3 − xSbx thin films

In this paper, we report results of the optical properties of thermally deposited As_2 − xS_3 − xSb_x thin films with x = 0.02, 0.07, 0.1 and 0.15. We have characterized the deposited films by Fourier Transform Infrared, Raman and X-ray photoelectron spectroscopy (XPS). The relationship between the structural and optical properties and the compositional variation were investigated. It was found that the optical bandgap decreases with increase in Sb content. The XPS core level spectra show a decrease in As₂S₃ percentage with increase in Sb content. This is confirmed from the shifting of the Raman peak from AsS₃ vibrational mode towards SbS₃ vibrational mode.