Parallel singular value decomposition of complex matrices usingmultidimensional CORDIC algorithms

The singular value decomposition (SVD) of complex matrices is computed in a highly parallel fashion on a square array of processors using Kogbetliantz's analog of Jacobi's eigenvalue decomposition method. To gain further speed, new algorithms for the basic SVD operations are proposed and their implementation as specialized processors is presented. The algorithms are 3-D and 4-D extensions of the CORDIC algorithm for plane rotations. When these extensions are used in concert with an additive decomposition of 2×2 complex matrices, which enhances parallelism, and with low resolution rotations early on in the SVD process, which reduce operation count, a fivefold speedup can be achieved over the fastest alternative approach     

Treatment of Styrene-Contaminated Airstream in Biotrickling Filter Packed with Slags

This paper reports the result of studies using a biotrickling filter with blast-furnace slag packings (sizes = 2–4 cm and specific surface area = 120 m2∕m3) for treatment of styrene in an airstream. The effects of volumetric styrene loading L, superficial gas velocity U0 and liquid recirculation rate VL on the styrene elimination capacity K, and the removal efficiency K∕L were tested. Variations of styrene concentration with packing height as well as rates of nutrient utilization were also tested. The results show that for L< 30 g∕m3?h, K∕L was nearly independent of U0 in the range of 29–67 m∕h and was independent of VL in the range of 3.84–9.60 m∕h. In this range, the rate of styrene removal was both reaction and diffusion limited and the reaction was of zero-order kinetics. For higher loadings, K∕L decreased with increasing U0 and increased with increasing VL and the system approached the condition of reaction limitation.     

Copper Assisted Inverted Pyramids Texturization of Monocrystalline Silicon in a Nitrogen Bubbling Bath for Highly Efficient Light Trapping

Silicon - Inverted pyramid (IP) texturization on silicon wafers has recently attracted attention for the structure’s light trapping ability and low specific surface area. The later property...     

Pathogenic Hydrogel? A Novel-Entrapment Neuropathy Model Induced by Ultrasound-Guided Perineural Injections

Entrapment neuropathy (EN) is a prevalent and debilitative condition caused by a complex pathogenesis that involves a chronic compression–edema–ischemia cascade and perineural adhesion that results in excessive shear stress during motion. Despite decades of research, an easily accessible and surgery-free animal model mimicking the mixed etiology is currently lacking, thus limiting our understanding of the disease and the development of effective therapies. In this proof-of-concept study, we used ultrasound-guided perineural injection of a methoxy poly(ethylene glycol)-b-Poly(lactide-co-glycoilide) carboxylic acid (mPEG-PLGA-BOX) hydrogel near the rat’s sciatic nerve to induce EN, as confirmed sonographically, electrophysiologically, and histologically. The nerve that was injected with hydrogel appeared unevenly contoured and swollen proximally with slowed nerve conduction velocities across the injected segments, thus showing the compressive features of EN. Histology showed perineural cellular infiltration, deposition of irregular collagen fibers, and a possible early demyelination process, thus indicating the existence of adhesions. The novel method provides a surgery-free and cost-effective way to establish a small-animal model of EN that has mixed compression and adhesion features, thus facilitating the additional elucidation of the pathophysiology of EN and the search for promising treatments.     

Interspecies Behavioral Variability of Medaka Fish Assessed by Comparative Phenomics

Recently, medaka has been used as a model organism in various research fields. However, even though it possesses several advantages over zebrafish, fewer studies were done in medaka compared to zebrafish, especially with regard to its behavior. Thus, to provide more information regarding its behavior and to demonstrate the behavioral differences between several species of medaka, we compared the behavioral performance and biomarker expression in the brain between four medaka fishes, Oryzias latipes, Oryzias dancena, Oryzias woworae, and Oryzias sinensis. We found that each medaka species explicitly exhibited different behaviors to each other, which might be related to the different basal levels of several biomarkers. Furthermore, by phenomics and genomic-based clustering, the differences between these medaka fishes were further investigated. Here, the phenomic-based clustering was based on the behavior results, while the genomic-based clustering was based on the sequence of the nd2 gene. As we expected, both clusterings showed some resemblances to each other in terms of the interspecies relationship between medaka and zebrafish. However, this similarity was not displayed by both clusterings in the medaka interspecies comparisons. Therefore, these results suggest a re-interpretation of several prior studies in comparative biology. We hope that these results contribute to the growing database of medaka fish phenotypes and provide one of the foundations for future phenomics studies of medaka fish.     

Subcellular Localisation of a Quinoline-Containing Fluorescent Cyclometallated IrIII Complex in Plasmodium falciparum

A fluorescent analogue of a previously synthesised N,N-chelated Ir^III complex was prepared by coordination of the organic ligand to an extrinsic bis(2-phenylpyridine)iridium(III) fluorophore. This cyclometallated Ir^III complex in itself displays good, micromolar activity against the chloroquine-sensitive NF54 strain of Plasmodium falciparum. Live-cell confocal microscopy found negligible localisation of the fluorescent complex within the digestive vacuole of the parasite. This eliminated the haem detoxification pathway as a potential mechanism of action. Similarly, no localisation of the complex within the parasitic nucleus was found, thus suggesting that this complex probably does not interfere with the DNA replication process. A substantial saturation of fluorescence from the complex was found near phospholipid structures such as the plasma and nuclear membranes but not in neutral lipid bodies. This indicates that an association with these membranes, or organelles such as the endoplasmic reticulum or branched mitochondrion, could be essential to the efficacies of these types of antimalarial compounds.     

金属熔池中浸入式侧吹射流行为

利用水模型和数学模型研究了金属熔池中浸入式侧吹射流的行为和混合效率.讨论了Themelis和Brimacombe等人研究结果的分歧,指出金属熔池中侧吹气体射流的结构受气泡生成的影响,射流轨迹不符合Szekely计算方法得出的规律.     

Formation of water-resistant hyaluronic acid nanofibers by blowing-assisted electro-spinning and non-toxic post treatments

A unique blowing-assisted electro-spinning process has been demonstrated recently to fabricate hyaluronic acid (HA) nanofibers. In this article, effects of various experimental parameters, such as air-blowing rate, HA concentration, feeding rate of HA solution, applied electric field, and type of collector on the performance of blowing-assisted electro-spinning of HA solution were investigated. With the assistance of air-blowing, the solution-feeding rate could be increased to 40 μl/min/spinneret and the applied electric field could be decreased to 2.5 kV/cm. The optimum conditions for consistent fabrication of HA (with a molecular weight of ∼3.5 million) nanofibers involved the use of an air-blowing rate of around 70 ft³/h and a concentration range between 2.5 and 2.7% (w/v) in aqueous solution. Two benign methods to fabricate water-resistant HA nanofibrous membranes without the use of reactive chemical agents were demonstrated: (a) the exposure of HA membranes in hydrochloric acid (HCl) vapor, followed by a freezing treatment at −20 °C for 20-40 days; and (b) the immersion of HA membranes in an acidic mixture of ethanol/HCl/H₂O at 4 °C for 1-2 days. Although both methods could produce hydrophilic, substantially water-resistant HA nanofibrous membranes (the treated membranes could keep their shape intact in neutral water at 25 °C for about 1 week), the immersion method (6) was shown to be more versatile and effective. IR spectroscopy was used to investigate this ‘cross-linking’ mechanism in the solid HA membrane. Viscosity studies of acidic HA solutions under varying freezing conditions were also carried out. It was found that when the freezing time exceeded 8 h, the HA solution became gel-like and exhibited a large increase in the hydrogen-bond concentration. Thus, the resistance to water solubility could be due to the high density of hydrogen bonds in the solid HA membranes that were treated by the ‘freezing’ approach.     

The effect of nanoclays on the nucleation,crystallization, and melting mechanisms of isotactic polypropylene

The influence of organomodified nanoclay (montmorillonite) on the crystallization and melting mechanisms of isotactic polypropylene (iPP) was studied. Films of both neat polymer and clay nanocomposites were prepared after molecular weight optimization through melt extrusion. Products exhibited the tactoidlike morphology since no compatibilizers were used. The effect of introduction of nanoclay within the polymer was studied through isothermal crystallization and linear heating. The results indicated that low nanoclay concentrations induce the formation of the β‐crystalline structure, its formation being inhibited with high nanoclay contents. Dynamic nonisothermal bulk crystallization experiments indicated that nanoclays act as nucleating agents of iPP. Isothermal, bulk crystallization studies indicated that the crystallization process (induction time and crystallization kinetics) is proportionally accelerated by the nanoclay presence. There was also an accelerated formation of secondary crystallization when nanoclays were present in high concentrations. POLYM. ENG. SCI., 47:1889–1897, 2007. © 2007 Society of Plastics Engineers     

Physical properties of polycaproamide/cationic dyeable poly(ethylene terephthalate) polyblended fibers

Polycaproamide (PCA) and cationic dyeable poly(ethylene terephthalate) (CDP) polymers were blended mechanically (in ratios of 75/25, 50/50, and 25/75) in a melt twin‐screw extruder to prepare three PCA/CDP polyblended materials. The blends of PCA and CDP were spun into fibers. The molar ratio of dimethyl 5‐sulfoisophthalate sodium salt for CDP was 2%. This study investigated the physical properties of PCA/CDP polyblended fibers with nuclear magnetic resonance, gel permeation chromatography, gas chromatography, potentiometer, differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), extension stress–strain measurements, density gradient analysis, and rheometry. The experimental results of DSC proved that PCA and CDP formed an immiscible system. In an SEM image of a 50/50 PCA/CDP blend, the morphological aggregation of a larger size, from 3 to 5 μm in diameter, was observed. The rheological behavior of the PCA/CDP polyblended materials exhibited negative‐deviation blends, and the 50/50 blend of the PCA/CDP polyblended fibers showed a minimum tenacity value. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1710–1715, 2004