Durability studies of surface-modified coir geotextiles

Coir (Cocos nucifera) is a natural fibre known to retain its strength and resist biodegradation far better than other industrial natural fibres. However, systematic studies in this discipline are scarce. Geotextiles are usually exposed to diverse pH, salinity, moisture, and microbial association conditions. In the present work, specific surface modifications of coir geotextiles using a natural agent (cashew nut shell liquid) have been carried out to enhance their long-term performance depending on the end applications. The modified and unmodified geotextiles were subjected to acidic, alkaline, and neutral pH conditions, saline conditions, alternate wetting and drying cycles, and thermal cycles for the assessment of their durability, measured in terms of tensile strength. In situ soil burial studies in a tropical climate were conducted in specially prepared soil to follow the biodegradation behaviour of geotextiles at various depths. The surface-modified geotextiles were found to resist adverse chemical, physical, and biological conditions much better than the unmodified geotextiles. Alkaline conditions marginally accelerated the degradation rates when compared to acidic environments. The saline conditions, as well as alternate wetting and drying conditions, resulted in marginal loss of tensile strength (<7%). The surface-modified geotextiles buried within lower depths of soil under field conditions retained 70–80% of their initial tensile strength after 12 months, whereas the unmodified geotextiles lost 88% strength in four months. The positive impact of surface modification on durability is confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The results indicate the excellent potential of suitably surface-modified coir geotextiles for long-term use in adverse conditions.     

ISSN exercise & sport nutrition review: research & recommendations

Sports nutrition is a constantly evolving field with hundreds of research papers published annually. For this reason, keeping up to date with the literature is often difficult. This paper is a five year update of the sports nutrition review article published as the lead paper to launch the JISSN in 2004 and presents a well-referenced overview of the current state of the science related to how to optimize training and athletic performance through nutrition. More specifically, this paper provides an overview of: 1.) The definitional category of ergogenic aids and dietary supplements; 2.) How dietary supplements are legally regulated; 3.) How to evaluate the scientific merit of nutritional supplements; 4.) General nutritional strategies to optimize performance and enhance recovery; and, 5.) An overview of our current understanding of the ergogenic value of nutrition and dietary supplementation in regards to weight gain, weight loss, and performance enhancement. Our hope is that ISSN members and individuals interested in sports nutrition find this review useful in their daily practice and consultation with their clients.     

Strategies for stationary and portable fuel cell markets

In the future, hydrogen-based stationary and portable fuel cell systems can help supply some or all of the power demanded with additional advantages of higher reliability, lower emissions, independence from the general grid, and cogeneration capability. In order to understand how to prepare the future for this technology, this paper describes a thorough investigation of past alternative stationary and portable power projects in order for an assessment of the opportunities for stationary and portable fuel cell markets, as well as interactions with transportation hydrogen systems. The lessons learned from the programs are used to establish best practices and recommendations for a hydrogen strategy that addresses opportunities for hydrogen in power generation systems, as well as to make recommendations for market transformation within the hydrogen fuel cell industry.     

Tin doping in spray pyrolysed indium sulfide thin films for solar cell applications

This paper presents studies carried out on tin-doped indium sulfide films prepared using Chemical Spray Pyrolysis (CSP) technique. Effect of both in-situ and ex-situ doping were analyzed. Ex-situ doping was done by thermal diffusion, which was realized by annealing Sn/In₂S₃ bilayer films. In-situ doping was accomplished by introducing Sn into the spray solution by using SnCl₄·5H₂O. Interestingly, it was noted that by ex-situ doping, conductivity of the sample enhanced considerably without affecting any of the physical properties such as crystallinity or band gap. Analysis also showed that higher percentage of doping resulted in samples with low crystallinity and negative photosensitivity. In-situ doping resulted in amorphous films. In contrast to ex-situ doping, ‘in- situ doping’ resulted in widening of optical band gap through oxygen incorporation; also it gave highly photosensitive films.     

Competition of thermally injured listeria monocytogenes with a mesophilic lactic acid starter culture in milk for various heat treatments

Overnight tryptose broth cultures of three L monocytogenes strains were combined, centrifuged, suspended in 200 ml of tryptose phosphate broth, and heated at 56 degrees C for 20 min and at 64 degrees C for 2 min to obtain low-heat-injured (LHI) and high-heat-injured (HHI) cells, respectively, showing >99.6% injury. Flasks containing 200 ml of raw, low-heat-treated (56 degrees C for 20 min), high-heat-treated (64 degrees C for 2 min), pasteurized, and ultrahigh-temperature (UHT) milk were tempered to 31.1 degrees C and inoculated to contain 10(4) to 10(6) CFU/ml of LHI, HHI, or healthy L. monocytogenes cells and a commercial Lactococcus lactis subsp. lactis-Lactococcus lactis subsp. cremoris starter culture at levels of 0.5, 1.0, and 2.0%. Numbers of healthy and injured L. monocytogenes cells and starter organisms were determined using tryptose phosphate agar with or without 4.0% NaCl at selected intervals during 24 h of incubation at 31.1 degrees C. The presence of L. monocytogenes did not adversely affect the growth of the starter culture at any inoculation level. Overall, L. monocytogenes survived the 24-h fermentation period and grew to some extent. In starter-free controls. 76 to 81% of LHI cells and 59 to 69% of HHI cells were repaired after 8 h of incubation, with the lowest repair rates being observed for raw rather than heat-treated or pasteurized milk. Increased injury was observed for healthy L. monocytogenes cells at the 1.0 and 2.0% starter levels, with less injury seen for LHI and HHI cells. Raw and subpasteurized milk allowed less of a decrease in the percentage of injury and also showed higher numbers of injured cells than did pasteurized and UHT milks. These findings may have important implications for the survival of Listeria spp. in certain cheeses that can be prepared from raw or heat-treated milk.     

Effects of antibiotic regimens on the fecal shedding patterns of pigs infected with salmonella typhimurium

An experiment was conducted to determine (i) the effects of antibiotic regimens on the shedding patterns of pigs infected with Salmonella Typhimurium and (ii) whether antibiotic resistance increases the incidence of pathogen shedding. The experiment involved 48 50-day-old pigs challenged with Salmonella Typhimurium and receiving one of four antibiotic regimens including (i) intramuscular injection of ceftiofur sodium followed by inclusion of oxytetracycline in the feed; (ii) apramycin in the feed for 14 days followed by oxytetracycline; (iii) carbadox in the feed until pigs reached 35 kg followed by oxytetracycline; (iv) no antibiotics (control). Fecal samples were collected preinoculation, 2 and 4 days postinoculation (DPI) and at weekly and biweekly intervals thereafter to determine shedding patterns. Salmonella Typhimurium isolates from 2, 4, 7, 21, 42, and 70 DPI were analyzed for antibiotic resistance. A time effect (P < 0.05) was observed, indicating that the proportion of isolates resistant to at least one antibiotic varied over time. Overall resistance was determined to be 46% at 2 DPI and increased significantly (P < .05) thereafter. Treatment x time and antibiotic x time interactions were also observed (P < 0.05) as the percentage of isolates resistant to each test antibiotic increased over time. In no case did the development of antibiotic resistance result in an increased incidence of shedding of the original inoculate. The incidence of shedding was reduced in pigs receiving the apramycin-oxytetracycline treatment, when compared to control pigs; however, no differences were observed between antibiotic treatments.     

Triple corner reflector antenna and its performance in H-plane

An experimental investigation of a novel corner reflector antenna with improved performance is reported. The corner reflector antenna has been structurally modified by attaching two more reflector elements. The parameters such as the primary corner angle, position, width and angle of the secondary elements have significant effects on the H-plane radiation characteristics of the antenna. Certain symmetric configurations of this triple corner reflector (TCR) antenna provide sharp beams with a gain of the order of 3 dB over that of the conventional corner reflector (CR) antenna     

Flow properties of thermally depolymerized liquid natural rubber

The flow behavior of liquid natural rubber (LNR) with reference to the effect of molecular weight, shear rate, and temperature has been studied. LNR samples were prepared by thermal depolymerization of rubber (NR) through the combined effect of mechanical, chemical, and thermal energies. High molecular weight samples, especially at lower temperatures, showed pseudoplastic behavior, whereas the low molecular weight samples were Newtonian at all temperatures. The viscosity of LNR considerably decreases with increase in temperature. The activation energy of flow was also calculated. © 1995 John Wiley & Sons, Inc.     

Ti: sapphire-based picosecond visible-infrared sum-frequency spectroscopy from 900-3100 cm-1

Visible-infrared sum-frequency spectroscopy is ideally suited to the study of surfaces and interfaces. This paper introduces new sum-frequency spectroscopy instrumentation that we have developed with two novel features: (1) stable and robust infrared generation in the 900-3100 cm(-1) (11-3.2 microm) region using an amplified Ti : sapphire oscillator with a home-built OPG/OPA, and (2) continuous tuning over either 900-2700 cm(-1) (11-3.7 microm) or 1800-3100 cm(-1) (5.5-3.2 microm) in a single experiment. All practical details of baseline correction issues due to the picosecond pulses (including variation in infrared (IR) energy, spatial and temporal overlap, Fresnel coefficients) are addressed while demonstrating signal throughout this region from an amorphous gold surface. A sum-frequency spectrum from an oriented polymer is shown as a complete example of the data treatment, which reveals the vibrational modes accessible in this wavelength region.