Exergoeconomic analysis of a vehicular PEM fuel cell system

In this study, we deal with the exergoeconomic analysis of a proton exchange membrane (PEM) fuel cell power system for transportation applications. The PEM fuel cell performance model, that is the polarization curve, is previously developed by one of the authors by using the some derived and developed equations in literature. The exergoeconomic analysis includes the PEM fuel cell stack and system components as compressor, humidifiers, pressure regulator and the cooling system. A parametric study is also conducted to investigate the system performance and cost behaviour of the components, depending on the operating temperature, operating pressure, membrane thickness, anode stoichiometry and cathode stoichiometry. For the system performance, energy and exergy efficiencies and power output are investigated in detail. It is found that with an increase of temperature and pressure and a decrease of membrane thickness the system efficiency increases which leads to a decrease in the overall production cost. The minimization of the production costs is very crucial in commercialization of the fuel cells in transportation sector.     

Mechanical performance of low cement reactive powder concrete (LCRPC)

The possibility of producing a reactive powder concrete (RPC) with low cement content was aimed in the scope of this study. Cement was replaced with class-C fly ash (FA) up to 60% for this purpose. Three different curing conditions (standard water curing, autoclave curing and steam curing) were applied to specimens. Two series of RPC composites were prepared with bauxite and granite aggregates. Mechanical properties such as compressive strength, splitting tensile strength, flexural strength and fracture energy of composites were investigated. Test results showed that, compressive strength of 200 MPa can be reached with low cement by using high-volume fly ash. Thermally treated specimens showed compressive strength beyond 250 MPa and high volume fly ash RPC have superior performance. Furthermore, compressive strength values reached up to 400 MPa with external pressure application during setting and hardening stages.     

Quantitative measurement of filament ruptures of a multi-filament AR-glass yarn embedded in concrete

This paper presents a new digital image analysis method for quantitative and online measurement of filament ruptures of a multi-filament AR-glass yarn embedded in concrete during pullout loading. The proposed method was developed based on an existing test method for determination of filament ruptures occurring during the loading called failure investigation using light transmitting (FILT) property test, which uses light transmitting property of AR-glass fibers. Artificial light is exposed on the glass filaments from one side of the specimen. On the opposite side, a charge-coupled device (CCD) camera with an optical microscope records the lighted filament cross-sections in the yarn. To detect filament ruptures during pullout loading, the light intensity time history of every individual filament of the yarn was investigated by a digital image analysis method. The number of broken filaments was also investigated by acoustic emission (AE) analysis simultaneously and the results were compared. Test results showed that the light transmitting property of AR-glass can be used to identify filament ruptures and it is possible to determine the failure of the filaments during pullout in the cross-section quantitatively by the improved FILT test.     

Walking dynamics are symmetric (enough)

Many biological phenomena such as locomotion, circadian cycles and breathing are rhythmic in nature and can be modelled as rhythmic dynamical systems. Dynamical systems modelling often involves neglecting certain characteristics of a physical system as a modelling convenience. For example, human locomotion is frequently treated as symmetric about the sagittal plane. In this work, we test this assumption by examining human walking dynamics around the steady state (limit-cycle). Here, we adapt statistical cross-validation in order to examine whether there are statistically significant asymmetries and, even if so, test the consequences of assuming bilateral symmetry anyway. Indeed, we identify significant asymmetries in the dynamics of human walking, but nevertheless show that ignoring these asymmetries results in a more consistent and predictive model. In general, neglecting evident characteristics of a system can be more than a modelling convenience—it can produce a better model.     

The effects of text structure and prior knowledge of the learner on computer-based learning

This study is an attempt to investigate the effects of document structure and knowledge level of the reader on reading comprehension, browsing, and perceived control. Four types of texts are distinguished, differing in structure (linear text, hierarchical hypertext, mixed hypertext, and generative text). All the materials were on a PC. In all conditions, participants were allowed 1 h to read through the document. After completing the reading part of the experiment, they were asked to fill out the perceived control questionnaire followed by the reading comprehension test. As far as reading comprehension was concerned, knowledgeable participants had higher reading comprehension scores than non-knowledgeable participants only in the linear text. In addition, there were no significant differences in terms of the reading comprehension scores of the knowledgeable participants among the four topologies. However, the performance of non-knowledgeable participants differed with respect to the type of the topology. In particular, non-knowledgeable participants in the hierarchical and generative conditions performed better than those in the other two conditions. With respect to perceived control, the performance of knowledgeable and non-knowledgeable participants was equivalent in all four conditions. The results are discussed in terms of their implications for the computer-based learning.     

Gold Extraction from an Oxide Ore by Thiourea Leaching with Hydrogen Peroxide as an Oxidant

Russian Journal of Non-Ferrous Metals - In this study, the effects of thiourea (CH4N2S) on the efficiency of gold dissolution were investigated for the extraction of gold from an oxide gold ore of...     

Enhanced corrosion resistance and surface characterization of anodized 7075 Al

Protection of Metals and Physical Chemistry of Surfaces - In this study, we aim to enhance physical and chemical properties of 7075 aluminum via anodizing. For this purpose, convenient potential,...     

A Computational Investigation of the Thermohydraulics of an EGS Project

A numerical analysis of the thermohydraulics of an enhanced geothermal system project is presented. The rock structures are modelled as porous medium, based on the computationally obtained hydraulic fracturing data of other authors. The influence of the domain size, grid resolution, temporal resolution and the discretization scheme is assessed to obtain a highly accurate numerical solution under the prevailing modelling assumptions. Based on the numerical model, different production scenarios are investigated and discussed. The relative positioning of the injection and production ports is also analyzed. It is shown that there is a considerable potential for optimizing the production rate and the port configuration to obtain the most favorable results for the production temperature, investment costs and operation costs.     

Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering

In this study, AlSi10Mg samples produced by the direct metal laser sintering (DMLS) method were applied to heat treatment with different parameters (stress relief and T6). Heat-treated and as-built samples were subjected to intergranular corrosion test according to BS EN ISO 11846 standard. Hardness, tensile, electrical conductivity, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and weight loss tests were applied to the samples. The corrosion, electrical conductivity, and mechanical properties of the DMLS-AlSi10Mg material were investigated in detail depending on the heat-treatment parameters.