Rheology,particle-size distribution,and stability of low-fat mayonnaise produced via double emulsions

In this study, the effects of the double emulsification method on the rheological properties, particle size, and stability of low-fat mayonnaise were studied. Different water-phase-to-oil ratios (2:8 and 4:6) of primary emulsions and different stabilizer types (sodium caseinate, xanthan gum, and lecithin-whey protein concentrate) were used to produce double-emulsified mayonnaise. As a control sample, mayonnaise was prepared conventionally. Sodium caseinate was found to be the most efficient stabilizer. In the presence of sodium caseinate, the stability and apparent viscosity of double-emulsified mayonnaise increased but their particle sizes decreased. It was found that flow behavior of double-emulsified and conventionally prepared mayonnaise could be described by the power law model. The double-emulsified mayonnaise samples were not different from the control samples in terms of stability and particle size. In addition, using the double emulsion method, it was possible to reduce the oil content of mayonnaise to 36.6%.     

An integrated system for ammonia production from renewable hydrogen: A case study

This study presents an analysis and assessment study of an integrated system which consists of cryogenic air separation unit, polymer electrolyte membrane electrolyzer and reactor to produce ammonia for a selected case study application in Istanbul, Turkey. A thermodynamic analysis of the proposed system illustrates that electricity consumption of PEM electrolyzer is 3410 kW while 585.4 kW heat is released from ammonia reactor. The maximum energy and exergy efficiencies of the ammonia production system which are observed at daily average irradiance of 200 W/m² are found as 26.08% and 30.17%, respectively. The parametric works are utilized to find out the impacts of inlet air conditions and solar radiation intensity on system performance. An increase in the solar radiation intensity results in a decrease of the efficiencies due to higher potential of solar influx. Moreover, the mass flow rate of inlet air has a substantial effect on ammonia production concerning the variation of generated nitrogen. The system has a capacity of 0.22 kg/s ammonia production which is synthesized by 0.04 kg/s H₂ from PEM electrolyzer and 0.18 kg/s N₂ from a cryogenic air separation unit. The highest exergy destruction rate belongs to PEM electrolyzer as 736.2 kW while the lowest destruction rate is calculated as 3.4 kW for the separation column.     

Metabolites of Cannabis Induce Cardiac Toxicity and Morphological Alterations in Cardiac Myocytes

Cannabis is one of the most commonly used recreational drugs worldwide. Rrecent epidemiology studies have linked increased cardiac complications to cannabis use. However, this literature is predominantly based on case incidents and post-mortem investigations. This study elucidates the molecular mechanism of Δ9-tetrahydrocannabinol (THC), and its primary metabolites 11-Hydroxy-Δ9-THC (THC-OH) and 11-nor-9-carboxy-Δ⁹-tetrahydrocannabinol (THC-COOH). Treatment of cardiac myocytes with THC-OH and THC-COOH increased cell migration and proliferation (p < 0.05), with no effect on cell adhesion, with higher doses (250–100 ng/mL) resulting in increased cell death and significant deterioration in cellular architecture. Conversely, no changes in cell morphology or viability were observed in response to THC. Expression of key ECM proteins α-SMA and collagen were up-regulated in response to THC-OH and THC-COOH treatments with concomitant modulation of PI3K and MAPK signalling. Investigations in the planarian animal model Polycelis nigra demonstrated that treatments with cannabinoid metabolites resulted in increased protein deposition at transection sites while higher doses resulted in significant lethality and decline in regeneration. These results highlight that the key metabolites of cannabis elicit toxic effects independent of the parent and psychoactive compound, with implications for cardiotoxicity relating to hypertrophy and fibrogenesis.     

Design,kinematic modeling and sliding mode control with sliding mode observer of a novel 3-PRR compliant mechanism

Compliant mechanisms have great advantages to be used as micropositioning stages for high-precision applications but they are very sensitive to manufacturing tolerances and assembling errors. In this work, a novel compliant stage having 3-PRR kinematic structure and actuated by piezoelectric actuators is introduced. A kinematic modeling based on compliance of the flexible elements and finite element analysis based model have been extracted. It is found out that the experimental results are not compatible with the theoretical results due to the manufacturing, actuator assembly errors. The position control of the mechanism has been achieved using sliding mode control which is a great method for unpredictable varying parameters in the system. Sliding mode observer has also been used for the hysteresis and nonlinearities of the piezoelectric actuators. Experimental models for each actuation axis have been used as the nominal models for the sliding mode observer. In order to see the advantage of the control method simple PID control has also been implemented. It is seen that sliding mode control with sliding mode observer using experimental models reduces the position tracking errors to the range of the accuracy of our available measurement.     

Biofabrication of Gelatin Tissue Scaffolds with Uniform Pore Size via Microbubble Assembly

The control of pore size and uniform porosity remains as an important challenge in gelatin scaffolds. The precise control in building blocks of tissue scaffolds without any additional porogen is possible with costly equipment and techniques, though some pre‐requirements for polymeric material, such as photo‐polymerizability or sintering ability, may be needed prior to construction. Herein, a method for the fabrication of gelatin scaffolds with homogenous porosity using simple T‐junction microfluidics is described. The size of the microbubbles is precisely controlled with 5% deviation from the average. Porous gelatin scaffolds are obtained by building‐up the monodispersed microbubbles in dilute cross‐linker solutions. The effect of cross‐linker density on pore diameter is also investigated. After cross‐linking, pore size of the resultant five scaffold groups are precisely controlled as 135 ± 11, 193 ± 11, 216 ± 9, 231 ± 5, and 250 ± 12 µm. Porosity ratios above 65% are achieved in every sample group. According to the cell culture experiments, structures support high cell adhesion, viability, and migration through the porous network via interconnectivity. This study offers a practical and economical approach for the preparation of porous gelatin scaffolds with homogenous porosity which can be utilized in diverse tissue engineering applications.     

Landmine detection training simulation using virtual reality technology

Virtual Reality - Landmines are frequently used for defence and attack. Thus, landmine detection is vital to preventing the damages incurred. Various landmine detection methods have been developed...     

Natural weathering of spruce wood chemically modified by re-used ε-caprolactone solution

Increasing environmental pressures over the last few years have led to attention for non-biocide treatments in the wood protection field. The ε-caprolactone modification of wood by substitution or blocking of hydroxyl groups with hydrophobic poly(ε-caprolactone) (PCL) is one of the novel modification methods developed in recent years. In this study, ring-opening polymerisation of ε-caprolactone in wood cell walls was evaluated by the third and sixth re-use of recovered monomer and by oven-curing method. Spruce samples were modified by re-used ε-caprolactone and exposed to the natural weathering agents for 12 months. After weathering, the colour change, surface roughness measurements, and macroscopic and ultra-microscopic observations revealed that the modified wood had better surface properties than reference wood. Fourier-transform infrared (FTIR) analysis proved that PCL could be found on the weathered surface up to the sixth month, but very little amount was detected on the surfaces with a longer weathering period. The results clearly showed that the efficiency of PCL modification with re-use of the monomer solution was sufficient during the initial weathering periods, but efficiency was reduced after a prolonged exposure period.