Neural Network Based Receiver for Multiuser Detection in MC-CDMA Systems

In this paper, we present a multiuser detection technique based on artificial neural network (NN) for synchronous multicarrier code division multiple access systems over Rayleigh fading channels. To test the robustness of the proposed receiver, also the effect of power control problem is studied with a comparative manner. Bit error rate (BER) performance of the NN based receiver is compared with the single user bound and conventional receivers. Although the BER performance of the conventional receiver degrades as the number of the users and power level differences among the users increase, as a decision structure, neural network based receiver gives closer BER performance to the single user bound.     

Design of practical broadband matching networks with commensurate transmission lines

To design broadband matching networks for microwave communication systems, commercially available computer aided design (CAD) tools are always preferred. But these tools need proper matching network topology and element values. Therefore, in this paper, a practical method is proposed to generate distributed-element matching networks with good initial element values. Then, the gain performance of the designed matching network can be optimized employing these tools. The utilization of the proposed method is illustrated by means of the given example. It is shown that proposed method provides very good initials for CAD tools.     

A new high-performance CMOS fully differential second-generation current conveyor with application example of biquad filter realisation

In this article, a new complementary metal oxide semiconductor (CMOS) high-performance fully differential second-generation current conveyor (FDCCII) implementation is proposed. The presented FDCCII provides high-output impedance at terminals Z+ and Z?, good linearity and excellent output–input current gain accuracy. Also, the proposed FDCCII circuit operates at a supply voltage of ±1.3 V. The applications of the FDCCII to realise voltage-mode multifunction filters are given. Simulations are performed using TSMC CMOS 0.35-μm technology to verify theoretical results.     

Wavelet decomposition of cardiovascular signals for baroreceptor function tests in pigs

In this paper, the discrete wavelet transform (DWT) was applied to analyze the fluctuations in RR interval and systolic arterial pressure (SAP) recorded from eight alpha-chloralose anesthetized pigs. Our aim was to characterize the autonomic modulation before and after cardiac autonomic blockade and during baroreflex function tests. The instantaneous power of decomposed low-frequency (LF) and high-frequency (HF) components was used for a time-variant spectral analysis. Our results suggested that transient events and changes in autonomic modulation were detected with high temporal resolution. A nonlinear relationship between RR interval and SAP during pharmacologically induced changes in blood pressure was found, when the superimposed effect of respiratory sinus arrhythmia was removed. In addition, the baroslopes were nearly linear when both the LF and HF components were removed using DWT decomposition.     

An Optically Responsive Soft Etalon Based on Ultrathin Cellulose Hydrogels

Stimuli‐responsive optical etalons are an exciting class of next‐generation sensors because they are scalable, cost‐effective and offer tunability of their optical response across the entire UV–vis–NIR wavelength range. In this study, double‐network cellulose hydrogels are used as a soft, responsive medium and are incorporated into Fabry–Pérot optical etalons. The thin cellulose hydrogel layer can be solution processed. The hygroscopic hydrogel undergoes both refractive index and thickness changes in response to changes in humidity. This leads to strong changes in reflection due to optical interference within the metal–insulator–metal (MIM) cavity. The response can be optimized by adjusting the chemical crosslinker ratio. These flexible MIM structures provide a robust platform for optically based chemical sensors.     

Trilayer Nanomesh Films with Tunable Wettability as Highly Transparent,Flexible, and Recyclable Electrodes

Metallic mesh materials are promising candidates to replace traditional transparent conductive oxides such as indium tin oxide (ITO) that is restricted by the limited indium resource and its brittle nature. The challenge of metal based transparent conductive networks is to achieve high transmittance, low sheet resistance, and small perforation size simultaneously, all of which significantly relate to device performances in optoelectronics. In this work, trilayer dielectric/metal/dielectric (D/M/D) nanomesh electrodes are reported with precisely controlled perforation size, wire width, and uniform hole distribution employing the nanosphere lithography technique. TiO₂/Au/TiO₂ nanomesh films with small hole diameter (≤700 nm) and low thickness (≤50 nm) are shown to yield high transmittance (>90%), low sheet resistance (≤70 Ω sq^?1), as well as outstanding flexural endurance and feasibility for large area patterning. Further, by tuning the surface wettability, these films are applied as easily recyclable flexible electrodes for electrochromic devices. The simple and cost‐effective fabrication of diverse D/M/D nanomesh transparent conductive films with tunable optoelectronic properties paves a way for the design and realization of specialized transparent electrodes in optoelectronics.     

Multiresolution coding techniques for digital television: A review

Multiresolution decompositions for video coding are reviewed. Both nonrecursive and recursive coding schemes are considered. In nonrecursive schemes, it is shown that pyramid structures have certain advantages over subband or wavelet techniques, and a specific spatiotemporal pyramid coding of HDTV is discussed in some detail. It is shown that recursive, DPCM like schemes will incur a slight loss of optimality due to a restricted form of prediction if multiresolution decomposition with compatible decoding is required. Compatibility and transmission issues are also discussed. Multiresolution transmission for digital broadcast TV is introduced. This, when combined with multiresolution source coding, achieves spectrum efficiency, robustness and graceful degradation under channel impairments.Invited PaperWork supported in part by the National Science Foundation under grants ECD-88-11111, MIP-90-14189 and Bell Communications Research.Work supported by the National Science Foundation under grants ECD-88-11111. K.M. Uz is now with David Sarnoff Research Center in Princeton, NJ 08543.     

Trade-offs in the OTA-based analog filter design

Operational transconductance amplifiers (OTAs) are widely used in the design of electronically tunable circuits. However, electronic tunability ranges of the OTA based filters are restricted by the limited bandwidth of the transconductance gain of the OTA. Furthermore, stability conditions and the linearity of the OTA which depends on the control current restrict the tunability. In this paper, some trade-offs in the electronically tunable filters are investigated. In addition, the tunability ranges of some first and second order OTA-C and OTA-RC filters are comparatively examined. Moreover, an OTA-C all-pass filter circuit is presented. SPICE simulations are performed and stability analyses are given for both of the OTA-C and OTA-RC filters. Operation of the presented all-pass filter is verified experimentally.