Nanotip electron gun for the scanning electron microscope

Experimental nanotips have shown significant improvement in the resolution performance of a cold field emission scanning electron microscope (SEM). Nanotip electron sources are very sharp electron emitter tips used as a replacement for the conventional tungsten field emission (FE) electron sources. Nanotips offer higher brightness and smaller electron source size. An electron microscope equipped with a nanotip electron gun can provide images with higher spatial resolution and with better signal-to-noise ratio. This could present a considerable advantage over the current SEM electron gun technology if the tips are sufficiently long-lasting and stable for practical use. In this study, an older field-emission critical dimension (CD) SEM was used as an experimental test platform. Substitution of tungsten nanotips for the regular cathodes required modification of the electron gun circuitry and preparation of nanotips that properly fit the electron gun assembly. In addition, this work contains the results of the modeling and theoretical calculation of the electron gun performance for regular and nanotips, the preparation of the SEM including the design and assembly of a measuring system for essential instrument parameters, design and modification of the electron gun control electronics, development of a procedure for tip exchange, and tests of regular emitter, sharp emitter and nanotips. Nanotip fabrication and characterization procedures were also developed. Using a "sharp" tip as an intermediate to the nanotip clearly demonstrated an improvement in the performance of the test SEM. This and the results of the theoretical assessment gave support for the installation of the nanotips as the next step and pointed to potentially even better performance. Images taken with experimental nanotips showed a minimum two-fold improvement in resolution performance than the specification of the test SEM. The stability of the nanotip electron gun was excellent; the tip stayed useful for high-resolution imaging for several hours during many days of tests. The tip lifetime was found to be several months in light use. This paper summarizes the current state of the work and points to future possibilities that will open when electron guns can be designed to take full advantage of the nanotip electron emitters.     

Dynamic parallel machine scheduling with mean weighted tardiness objective by Q-Learning

In this paper, we discuss a dynamic unrelated parallel machine scheduling problem with sequence-dependant setup times and machine–job qualification consideration. To apply the Q-Learning algorithm, we convert the scheduling problem into reinforcement learning problems by constructing a semi-Markov decision process (SMDP), including the definition of state representation, actions and the reward function. We use five heuristics, WSPT, WMDD, WCOVERT, RATCS and LFJ-WCOVERT, as actions and prove the equivalence of the reward function and the scheduling objective: minimisation of mean weighted tardiness. We carry out computational experiments to examine the performance of the Q-Learning algorithm and the heuristics. Experiment results show that Q-Learning always outperforms all heuristics remarkably. Averaged over all test problems, the Q-Learning algorithm achieved performance improvements over WSPT, WMDD, WCOVERT, RATCS and LFJ-WCOVERT by considerable amounts of 61.38%, 60.82%, 56.23%, 57.48% and 66.22%, respectively.     

Atmospheric effects of friction,friction noise and wear with silicon and diamond. Part II. SEM tribometry of silicon in vacuum and hydrogen

Scanning electron microscope (SEM) tribometric data on polycrystalline silicon (poly-Si) vs. poly-Si, Si(100) vs. Si(100) and Si(111) vs. Si(111) interfaces, obtained in Torr and in 0.2 Torr partial pressure of hydrogen gas ( ) from room temperature to 850^°C, were performed under standard and much slower thermal ramping rates. The friction data were analyzed per the methodology described in part I of this paper series. The results indicate a highly beneficial friction- and wear-reducing regime within a relatively narrow thermal region. This desirable region coincides with some chemisorption of excited species of molecular hydrogen just before the mass thermal desorption of surface hydrides. These data represent the tribochemical equivalent of a method routinely used in electronics, whereby deep electron traps (dangling Si bonds) are passivated by baking in molecular hydrogen. The also exerts a moderating influence on the size of the friction noise at all test temperatures. However, the general level of friction beyond the beneficial thermal region is high. In parallel, the general wear rate of Si representative of the entire range of standard thermal ramping in both atmospheric environments is in the extremely high 10^-12m³/(N m) range. Operating strictly in the beneficial, low-friction thermal regime resulted in a several orders-of-magnitude reduction in the wear rate over those measured under standard thermal ramping conditions. Although the results confirm previous findings that Si is not a good material of construction for miniaturized moving mechanical assemblies (e.g., microbearings and gears), there seems to be some limited possibility of gas-phase lubrication of Si micromechanisms with rarefied hydrogen at surface temperatures between 100 and 300^°C. This revised version was published online in July 2006 with corrections to the Cover Date.     

A New Synthetic Hydrocarbon Liquid Lubricant for Space Applications

Synthetic hydrocarbon liquid lubricants (based on polyalphaolefins) have been developed for use in space applications. These materials have been fully characterized and their physical properties reported which include: kinematic and absolute viscosity, viscosity index, vapor pressure, evaporation, specific gravity, pour point, coefficient of thermal expansion, refractive index, and flow activation energy. In addition, tribological properties under ultrahigh vacuum conditions have been determined. These include: lubricated lifetimes using a spiral orbit tribometer (SOT) and vacuum four-ball wear rates. These values are compared to existing state-of-the-art space lubricants.     

Facebook User Research Using a Probability‐Based Sample and Behavioral Data

Research on Facebook users is often based on small convenience samples and on usage data collected through survey self‐reports. The current research contributes to Facebook user research, as it is based on a large, nationally representative, probability‐based, U.S. sample with Internet usage data collected from meters. Results revealed that 50% of sample members are recent Facebook users. However, within this group, there is wide variation in amount of usage between heavy, medium, and light users. Finally, based on a multivariate analysis, Facebook users are significantly more likely to be women, teens, whites, and adults with at least a high school diploma. These demographic patterns apply to heavy, medium, and light Facebook users.     

Efficient Total Chemical Synthesis of 13C=18O Isotopomers of Human Insulin for Isotope‐Edited FTIR

Isotope‐edited two‐dimensional Fourier transform infrared spectroscopy (2 D FTIR) can potentially provide a unique probe of protein structure and dynamics. However, general methods for the site‐specific incorporation of stable ¹³C=¹⁸O labels into the polypeptide backbone of the protein molecule have not yet been established. Here we describe, as a prototype for the incorporation of specific arrays of isotope labels, the total chemical synthesis—via a key ester insulin intermediate—of 97 % enriched [(1‐¹³C=¹⁸O)Phe^B24] human insulin: stable‐isotope labeled at a single backbone amide carbonyl. The amino acid sequence as well as the positions of the disulfide bonds and the correctly folded structure were unambiguously confirmed by the X‐ray crystal structure of the synthetic protein molecule. In vitro assays of the isotope labeled [(1‐¹³C=¹⁸O)Phe^B24] human insulin showed that it had full insulin receptor binding activity. Linear and 2 D IR spectra revealed a distinct red‐shifted amide I carbonyl band peak at 1595 cm^?1 resulting from the (1‐¹³C=¹⁸O)Phe^B24 backbone label. This work illustrates the utility of chemical synthesis to enable the application of advanced physical methods for the elucidation of the molecular basis of protein function.     

Finite Element Methods for a System of Dispersive Equations

The present study is concerned with the numerical approximation of periodic solutions of systems of Korteweg–de Vries type, coupled through their nonlinear terms. We construct, analyze and numerically validate two types of schemes that differ in their treatment of the third derivatives appearing in the system. One approach preserves a certain important invariant of the system, up to round-off error, while the other, somewhat more standard method introduces a measure of dissipation. For both methods, we prove convergence of a semi-discrete approximation and highlight differences in the basic assumptions required for each. Numerical experiments are also conducted with the aim of ascertaining the accuracy of the two schemes when integrations are made over long time intervals.     

Influence of inoculum and climatic factors on the severity of Fusarium head blight in German spring and winter barley

Fusarium head blight (FHB) of small cereals is a disease of global importance with regard to economic losses and mycotoxin contamination harmful to human and animal health. In Germany, FHB is predominantly associated with wheat and F. graminearum is recognised as the major causal agent of the disease, but little is known about FHB of barley. Monitoring of the natural occurrence of FHB on Bavarian barley revealed differences for individual Fusarium spp. in incidence and severity of grain infection between years and between spring and winter barley. Parallel measurement of fungal DNA content in grain and mycotoxin content suggested the importance of F. graminearum in winter barley and of F. langsethiae in spring barley for FHB. The infection success of these two species was associated with certain weather conditions and barley flowering time. Inoculation experiments in the field revealed different effects of five Fusarium spp. on symptom formation, grain yield and mycotoxin production. A significant association between fungal infection of grain and mycotoxin content was observed following natural or artificial infection with the type B trichothecene producer F. culmorum, but not with the type A trichothecene-producing species F. langsethiae and F. sporotrichioides. Trichothecene type A toxin contamination also occurred in the absence of significant damage to grain and did not necessarily promote fungal colonisation.