Linear Three Dimensional Instability of Viscoelastic Fluid Layers Flowing Down Cylindrical Walls

In this paper we present results of the three dimensional linear instability of a viscoelastic thin film flowing down a vertical cylinder. The Oldroyd B fluid model is used. It is shown that the destabilizing effects of viscoelasticity appear in two ways: by increasing the growth rate and by promoting the appearance of more azimuthal modes for a smaller radius of the cylinder.     

Mobility of Pb in salt marshes recorded by total content and stable isotopic signature

Total lead and its stable isotopes were analysed in sediment cores, leaves, stem and roots of Sacorconia fruticosa and Spartina maritima sampled from Tagus (contaminated site) and Guadiana (low anthropogenic pressure) salt marshes. Lead concentration in vegetated sediments from the Tagus marsh largely exceeded the levels in non-vegetated sediments. Depth profiles of (206)Pb/(207)Pb and (206)Pb/(208)Pb showed a decrease towards the surface ((206)Pb/(207)Pb=1.160-1.167) as a result of a higher proportion of pollutant Pb components. In contrast, sediments from Guadiana marsh exhibited low Pb concentrations and an uniform isotopic signature ((206)Pb/(207)Pb=1.172+/-0.003) with depth. This suggests a homogeneous mixing of mine-derived particles and pre-industrial sediments with minor inputs of anthropogenic Pb. Lead concentrations in roots of plants from the two marshes were higher than in leaves and stems, indicating limited transfer of Pb to aerial parts. A similar Pb isotopic signature was found in roots and in vegetated sediments, indicating that Pb uptake by plants reflects the input in sediments as determined by a significant anthropogenic contribution of Pb at Tagus and by mineralogical Pb phases at Guadiana. The accumulation in roots from Tagus marsh (max. 2870 microg g(-1) in S. fruticosa and max. 1755 microg g(-1) in S. maritima) clearly points to the dominant role of belowground biomass in the cycling of anthropogenic Pb. The fraction of anthropogenic Pb in belowground biomass was estimated based on the signature of anthropogenic Pb components in sediments ((206)Pb/(207)Pb=1.154). Since no differences exist between Pb signature in roots and upper sediments, the background and anthropogenic levels of Pb in roots were estimated. Interestingly, both background and anthropogenic Pb in roots exhibited a maximum at the same depth, although the proportion of anthropogenic Pb was relatively constant with depth (83+/-4% for S. fruticosa and 74+/-8% for S. maritima).     

Decomposition of belowground litter and metal dynamics in salt marshes (Tagus Estuary, Portugal)

The concentrations of C, Fe, Mn, Zn, Cu, Pb and Cd were determined monthly in decomposing roots of Halimione portulacoides, using litterbag experiments, in two salt marshes of the Tagus estuary with different levels of contamination. Although carbon concentrations varied within a narrow interval during the experiment, litter decomposed rapidly in the first month (weight loss between 0.051 and 0.065 g d(-1)). The time variation of metals was examined in terms of Me/C ratios and metal stocks. Ratios of Fe/C and Mn/C and their metal stocks increased in spring, presumably due to the precipitation of oxides in the surface of decomposing roots. Subsequent decrease of Fe/C and Mn/C ratios suggests the use of Fe and Mn oxides, as electron acceptors, in the organic matter oxidation. Zinc, Cu, Pb and Cd ratios to C were, in general, higher than at initial conditions implying that metal that leached out was slower than carbon. However, metal stocks decreased during the experiment indicating that incorporation or sorption of metals in Fe and Mn oxides did not counterbalance the amount of Zn, Pb and Cd released from decomposing litter. An exception was observed for Cu, since stock in the less contaminated marsh (Pancas) increased during the decomposition, indicating that litter was efficient on Cu binding under more oxidising conditions. These results emphasize the importance of litter decomposition and sediment characteristics on metal cycling in salt marshes.     

Microplastic and other anthropogenic microparticles in water and sediments of Lake Simcoe

Microplastics (plastic particles <5 mm in size) have been reported in ecosystems worldwide and have been shown to cause adverse negative impacts on organisms. This study provides the first report of microplastics and other anthropogenic microparticles in the surface waters and sediments of Lake Simcoe in Ontario, Canada, a popular recreational and fishing lake. Surface waters (low volume grabs and manta trawls) and sediments were sampled from eight sites to determine microparticle abundances and character (size, morphology, material identity). Concentrations ranged from 0 to 0.7 particles/L in surface water grab samples, 0.4–1.3 particles/m³ in manta trawl samples, and 8.3–1070 particles/kg in sediment samples. Spectroscopic analysis confirmed that 72% of particles were anthropogenic, with 64% unambiguously identified as microplastics. However, confirmed microplastic concentrations were approximately 6–7 times lower than unadjusted counts in sediments, demonstrating the importance of verifying and adjusting reported values. Fibers were only quantified and characterized in surface water grab samples and sediments, and were the most common morphology, accounting for 82% and 89% of anthropogenic particles, respectively. Fragments were most common in manta trawl samples (75%, excluding fibers) and consisted predominantly of polyethylene (41%) and polypropylene (22%). The influence of proximity to urban centers and prevailing winds on the distribution of microplastics was apparent in surface water manta trawls. Microplastics and other anthropogenic microparticles are present in Lake Simcoe but at lower abundances than at locations impacted by larger population centers in other large freshwater lakes such as Lakes Ontario and Erie of the Great Lakes.     

Design-Operation of Multi-Hydropower Reservoirs: HBMO Approach

To illustrate and test the applicability and performance of the innovative honey-bee mating optimization (HBMO) algorithm in highly non-convex hydropower system design and operation, two problems are considered: single reservoir and multi-reservoir. Both hydropower problems are formulated to minimize the total present net cost of the system, while achieving the maximum possible ratio for generated power to installed capacity. The single hydropower reservoir problem is approached by the developed algorithm in 10 different runs. The first feasible solution was generated initially and later improved significantly and solutions converged to a near optimal solution very rapidly. In the application of the proposed algorithm to a five-reservoir hydropower system with 48 periods and a total of 230 decision variables, in early mating flights, the first feasible solution was identified and the results converged to a near optimal solution in later mating flights. In the case of the multi-reservoir problem, an efficient gradient-based nonlinear-programming solver (LINGO 8.0) failed to find a feasible solution and for the single hydropower reservoir design problem it performed much worse than the proposed algorithm.     

Room-Temperature Degradation of t-Zr(Pr)O2 in an Aqueous Suspension Revealed by Perturbed Angular Correlations

This paper deals with the phase stability of an aqueous suspension of tetragonal Zr_0.9Pr_0.1O₂ (20 wt%/vol%) at room temperature as a function of the aging time. The suspension is investigated in situ using the highly localized Perturbed Angular Correlations technique. The results indicate that an almost fully reversible degradation process toward monoclinic zirconia takes place through a first-order reaction of rate constant k =0.7 day⁻¹. Two successive diffusion mechanisms are observed that are interpreted as OH⁻ ions' migration in the grain surface and then, as proton defects' diffusion into the bulk.     

Analysis of the thermal behaviour of a low cost,single-family,more sustainable house in Porto Alegre,Brazil

Efforts have been made in Brazil to improve the thermal performance of low-cost buildings. Since 1997 studies on low-cost housing have been developed by Núcleo Orientado para a Inovação da Edificação, the construction sector of the Engineering College of the Rio Grande do Sul University, Brazil. In 2000 a prototype of a low-cost house was built on the university campus. This prototype has undergone several evaluations in an attempt to assess its thermal and environmental performance, like: energy consumption, rainwater harvesting, use of sustainably managed wood for window frames and doors, besides a detailed accounting of overall costs. The thermal performance of the house was monitored, by recording outdoor and indoor air temperatures and relative humidity, over the period of whole year. A brief appraisal of such results, as well as the annual heating and cooling degree-hours are presented. Daily swings in outdoor are a common climatic event in Porto Alegre and the building response to daily temperature swings, greater than 10 K, and hot and cold spells are presented. The results show that the thermal performance of the prototype is fairly satisfactory, considering the limitations of a low-cost house, when artificial heating and cooling is not affordable.     

Synthesis,characterization and application of poly[(1‐vinyl‐2‐pyrrolidone)‐co‐(2‐hydroxyethyl methacrylate)] as controlled‐release polymeric system for 2,4‐dichlorophenoxyacetic chloride using an ultrafiltration technique

BACKGROUND: Polymers supporting chemicals used in agriculture have recently been developed to overcome the serious environmental problems of conventional agrochemicals. The success of these formulations is based on a suitable choice of polymer support. Degradable polymeric hydrogels are of particular interest. The gradual release of the bioactive agent can be achieved by hydrolytic or enzymatic cleavage of the linking bond. RESULTS: In this context, poly[(1‐vinyl‐2‐pyrrolidone)‐co‐(2‐hydroxyethyl methacrylate)] [poly(NVP‐co‐HEMA)] has been used as a bioactive carrier reagent. Herein, we report a controlled‐release system with the herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D) using an ultrafiltration system. Hydrolysis was studied by testing the release at various pH values. A high release with poly(NVP‐co‐HEMA)–2,4‐D was observed at pH = 7 and 10 after two days (Z = 2). The release percentage of copolymer–herbicide increased at pH = 10. It showed release values between 79.0 and 94.5%. Poly(NVP‐co‐HEMA)–herbicide can release a bioactive compound in aqueous solution at pH = 3, 7 and 10. CONCLUSION: Based on the results of homogeneous hydrolysis, it is argued that the herbicide release rate depends on the pH of the reaction environment. This functional polymer could be employed as a biodegradable material for applications in agrichemical release. Copyright © 2008 Society of Chemical Industry     

Unstructured mathematical model for biomass,lactic acid and bacteriocin production by lactic acid bacteria in batch fermentation

BACKGROUND: A simple macroscopical model was proposed to describe the fermentation kinetics of growth, bacteriocins and lactic acid production by Lactococcus lactis and Pediococcus acidilactici in a batch system. The equations used were: the logistic reparametrized for growth, the Luedeking–Piret model for bacteriocin production, the maintenance energy model for glucose consumption; and the homofermentative balance equation for lactic acid formation. RESULTS: In all the cultures, the mathematical models, consistents and robusts, adjusted, perfectly, the experimental kinetic profiles. Also, the corresponding kinetic parameters were significant, so much biological as statistically. CONCLUSIONS: The group of integrated equations used, besides showing high accuracy in predicting the studied bioproductions, established a useful tool for the control of lactic acid bacteria kinetics in bioreactors in terms of its statistical consistency. Copyright © 2007 Society of Chemical Industry