Molecular-biological approaches to studying gene expression during regeneration

This paper constitutes a review of the methodical approaches allowing analysis of the mechanisms underlying development and differentiation. Progress in investigation of the mechanisms underlying embryogenesis is related to the discovery of genic families in the Drosophila genome, which are responsible for different periods of embryogenesis. The true revolution in studies of developmental mechanisms began with the application of molecular-genetic methods for analysis of Drosophila mutant lines. The clarification and analysis of the genes controlling regeneration is one of the most effective paths toward an understanding of the mechanisms underlying regeneration. No mutations affecting regeneration are, and the development of alternative (i.e., not based on mutation analysis) methods of discovery of the genes controlling regeneration is necessary for investigation of the genetic mechanisms of regeneration. The advantages and drawbacks of the two main approaches for discovery of the genes controlling regeneration are considered. The first approach is based on the production of a bank of sequences expressed in the regenerating structures and subsequent screening of the bank by the known probes. This approach also involves analysis of the structure, function, and expression pattern of the obtained homologs. The second approach is based on subtractive hybridization, which allows identification of the genes specifically expressed in the regenerating structures. This approach was made it possible to identify, for the first time, new genes specifically expressed during lens and retina regeneration in amphibians.     

Effect of A-site metal on methane combustion on 2% Pd / AMn1-x Fe x O3 (A = Ba, La, Pr; x = 0.4, 0.6, 1) perovskites

Barium, lanthanum, and praseodymium perovskites were prepared by malic acid complexation. Surface areas of the La and Pr perovskites were between 17.1 and 21.6 m² g⁻¹. The moderate low surface areas (5.7 m² g⁻¹) observed for corresponding barium perovskites were due to the high calcination temperatures. The calcination temperature also affected the shapes and sizes of the perovskite particles. According to SEM images the nanoparticles of the La and Pr perovskites were spherical, whereas those of barium perovskites were flakes. The conversion of methane increased in the order of A-site metal Ba < Pr < La. The CH₄ conversion after SO₂ treatment correlated with size of the perovskite particles: the smaller the particles the better the activity. The highest methane conversion after SO₂ treatment was achieved with lanthanum perovskite with B-site metal combination Mn_0.4Fe_0.6.     

Chemical Synthesis of a Synthetic Analogue of the Sialic Acid‐Binding Lectin Siglec‐7

As a basis for the development of an artificial carbohydrate‐binding lectin, we chemically synthesized a domain of siglec‐7, a well‐characterized sialic‐acid‐binding lectin. The full polypeptide (127 amino acids) was constructed by sequential native chemical ligation (NCL) of five peptide segments. Because of poor cysteine availability for NCL, cysteine residues were introduced at suitable ligation sites; these cysteine residues were alkylated in order to mimic native glutamine or asparagine residues, or converted to an alanine residue by desulfurization after NCL. After folding the full‐length polypeptide, the sialic‐acid‐binding activity of the synthetic siglec‐7 was clearly demonstrated by STD NMR and ELISA experiments. We succeeded in the synthesis of siglec‐7 by installing three extra cysteine residues with side‐chain modifications and found that these modifications did not affect the binding activity.     

Photocatalytic degradation of phenol in aqueous solution by rare earth-doped SnO2 nanoparticles

The influence of heterogeneous semiconductors on the photodegradation of phenol in water was investigated using doped tin dioxide (SnO₂) nanoparticles. Photocatalysts of SnO₂ were synthesized with lanthanum (La), cerium (Ce), and neodymium (Nd) dopants. These photocatalysts were synthesized from tin tetrachloride by sol–gel method with different dopant concentrations, and its photocatalytic degradation was investigated up to 0.8 % under UV-A light in aqueous suspensions. The photocatalytic oxidation reactions were studied by varying photocatalyst composition, light intensity, reaction time, pH of the reaction medium, and phenol concentration. It was found that the photocatalytic activity of rare earth-doped SnO₂ for phenol decomposition under UV light irradiation was considerably higher than that of pure SnO₂ nanoparticles. The experimental results also indicate that more than 95 % phenol was effectively oxidized in the presence of an aqueous suspension of La: SnO₂ nanoparticles within 120 min of UV light irradiation.     

Influence of different feeding systems on the growth performance and muscle development of Japanese Black steers

This study investigated the growth performance and gene expression for muscle development between grass hay-fed (GH) and concentrate-fed (CT) steers. Daily gain and energy intake during the fattening period of the GH group were lower than those of the CT group. Analysis of C/EBPα, PPARγ2, myosin heavy chain (MHC), and myostatin gene expressions was performed by real-time PCR. Expressions of C/EBPα and myostatin in semitendinosus and longissimus lumborum (LL) muscles were higher in the CT group than in the GH group at the end of fattening. In LL muscle, MHC expression at the end of fattening was greater in the GH group than in the CT group. These results suggest that regulation of adipogenesis and myogenesis by the expression of genes involved in muscle development might have occurred in the skeletal muscle of the GH group by the feeding of grass hay and/or because of the low energy intakes.     

Modelling and simulation of the near-wall velocity of a turbulent ceiling attached plane jet after its impingement with the corner

At present, ceiling-mounted diffusers are very popular for indoor air distribution, particularly in offices, owing to greater efficiency in the distribution of the air supply and a more comfortable indoor environment. The objective of this study is to construct an effective model to design the indoor airflow of an attached plane jet after its impingement with the corner in a room. In this study, a full-scale test facility was set up to obtain detailed experimental data. One commercial CFD tool, CFX 11.0, was used to simulate the air velocity distribution of an attached plane air jet bounded by the ceiling and an insulated wall. One semi-empirical model was also constructed to predict the impingement jet velocity. The results show that bout the semi-empirical model and CFX 11.0 were able to predict the maximum velocity of an impinging jet at low Reynolds numbers, 1000 and 2000, with an inaccuracy of ±11%. However, the semi-empirical model could be more conveniently used to predict the maximum jet velocity decay after its impingement the corner in a room than CFD simulation in terms of accuracy and the time required to design the indoor airflow pattern.     

Psychological Stress Tasks in the Prediction of Blood Pressure Level and Need for Antihypertensive Medication: 9-12 Years of Follow-Up.

Increased blood pressure (BP) reactivity to subtypes of psychological stimuli may differentially predict the development of future BP elevation or hypertension. The authors present the 9-12-year follow-up results of 82 (86%) of 95 male participants with different BP levels. They were healthy, untreated, and age-matched volunteers from a routine health checkup carried out on all 35-, 40-, and 45-year-olds from a medium-sized city. Intra-arterial systolic blood pressure (SBP) during the psychological tasks improved the prediction of future casual SBP and noninvasive 24-hr ambulatory SBP compared with predictions from casual diagnostic measurements. Diastolic blood pressure (DBP) was very useful when added to casual DBP in predicting the need for antihypertensive medication. Reactivity to active tasks especially predicts the need for antihypertensive medication. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Aqueous poly(urethane–urea) dispersions and cast films based on m‐TMXDL. 1. Structure–property relationships

Aqueous poly(urethane–urea) dispersions were prepared from polycaprolactone diol, α,α,α′,α′‐tetramethyl‐1,3‐xylylene diisocyanate (m‐TMXDI) and α,α‐dimethylol propionic acid (DMPA) using a prepolymer mixing process. In the process, polyurethane prepolymers were neutralised with triethylamine and the chains extended in water with either hydrazine, 1,2‐ethylene diamine or 1,2‐propylene diamine. For comparison, some samples were prepared from a more commonly used diisocyanate, isophorone diisocyanate (IPDI). Dispersion characteristics and basic structure–property relationships of the cast films were determined. m‐TMXDI provided some advantages over IPDI in the preparations since its use gave lower prepolymer viscosities and better resistance to elevated temperatures. Films prepared from m‐TMXDI dispersions exhibited considerably lower values of Young's modulus and hardness and higher elongations at break than those prepared from IPDI‐based dispersions for analogous compositions, whereas differences in the average particle sizes or viscosities of the dispersions were only small. When the DMA content was varied, the dispersions and cast films of m‐TMXDI‐based systems showed similar changes as are known to occur in IPDI‐based systems: as the DMPA content was increased, the average particle size of the dispersions decreased and the viscosity increased, and for the cast films, the Young's modulus and tensile strength increased and the maximum elongation at break decreased. Changing the chain‐extension agent from hydrazine to 1,2‐ethylene diamine, to 1,2‐propylene diamine and had little effect on the particle size of the dispersions, but increased the Young's modulus and hardness of the respective cast films. Molar masses of the chain‐extended polymers were unexpectedly low. DSC analysis of cast films indicated that the degree of crystallisation of the soft or hard domains was low. © 2002 Society of Chemical Industry     

Increased disruption of sperm plasma membrane at sperm immobilization promotes dissociation of perinuclear theca from sperm chromatin after intracytoplasmic sperm injection in pigs

The effects of sperm-immobilization methods on decondensation of sperm chromatin and retention of subacrosomal sperm perinuclear theca (SAR-PT) after intracytoplasmic sperm injection (ICSI) were examined in pigs. Sperm membrane damage caused by different immobilization methods by rubbing with a micropipette without piezo pulses (R), or with a low (L) or high (H) intensity of piezo pulses while rubbing, was assessed by the time required for staining of sperm heads with eosin Y solution. The average time for staining of sperm heads immobilized by the R, L or H treatments was 76, 41 or 26 s, respectively. The fertilization rate following ICSI was increased by sperm immobilization by piezo pulses compared with R, but increased intensity of pulses from L to H did not cause further improvements (29, 48 and 47%, respectively). An immunofluorescence study revealed that H immobilization promoted the dissociation of SAR-PT from sperm chromatin compared with L and R, and it increased the frequency of male pronuclear formation in which chromatin appeared uniformly decondensed. With in vitro fertilization (IVF), SAR-PT disassembled coordinately with sperm chromatin decondensation and it was not detectable around male pronuclei. This was different from most of the oocytes after ICSI in which remnants SAR-PT were detected adjacent to male pronuclei. We concluded that increased damage on the sperm plasma membrane at immobilization improved fertilization rates and decondensation of sperm chromatin after ICSI due to the accelerated dissociation of SAR-PT from the sperm nucleus. Also, the behavior of SAR-PT after ICSI was different from that observed in oocytes after IVF.