Effect of temperature on friction observed between a Si3N4 tip and a dodecanethiol self-assembled monolayer on Au(1 1 1)

Recent computational studies (Phys. Rev. Lett. 70 (1993) 1960; Phys. Rev. B 62 (2000) 17055) predicted that friction of ordered organic monolayer had characteristic dependence on temperature, where the maximum friction was observed around rotator transition point of the monolayer. This remained to be confirmed experimentally. Using a friction force microscope (FFM) combined with a temperature regulation module, we attempted to investigate such dependence on temperature (130 K-room temperature) on a self-assembled monolayer of dodecanethiol prepared on Au(1 1 1). The observed friction showed strong dependence on temperature and good agreement with the computational prediction.     

Mass mating method in combination with G418- and aureobasidin A-resistance markers for efficient selection of hybrids from homothallic strains in Saccharomyces cerevisiae

We have developed a mass mating method using the spore suspensions of homothallic yeasts of Saccharomyces cerevisiae in combination with dominant selective drug resistance markers, Tn601(903) against geneticin and AUR1-C against aureobasidin A for the selection of the hybrids. To examine the effectiveness of these markers in the mass mating method, each marker was introduced into a homothallic wine yeast. Using a mixed culture of spore suspensions from the resultant transformants, many hybrids were screened by the drug resistance markers. This method is more practical than the spore-to-spore mating method because it does not require the use of a micromanipulator and many hybrids are obtained at one time. The resultant hybrids could be utilized for industrial brewing because plasmids, which are used to confer resistance markers, are easily eliminated from the hybrids by cultivation in a medium without drugs. We propose that the mass mating method using spore suspensions in combination with dominant selective geneticin- and aureobasidin A-resistance markers is useful for the selection of hybrids from industrial homothallic yeasts.     

An optoelectronic self-oscillatory circuit with an optical fiber delayed feedback and its injection locking technique

An optoelectronic self-oscillatory circuit with a constant time delay and its injection locking have been theoretically and experimentally described. The oscillation circuit incorporates a delayed feedback path by utilizing an optical fiber and is characterized by a differential-difference equation. The oscillation waveform and amplitude have been investigated by computing the equation. It is also shown that a stable frequency locking region exists and expands with an increase in the injection amplitude. By employing a carrier signal, two methods for optoelectronic oscillation, an AM and an FM type, are proposed and have been demonstrated to obtain more stable oscillation.     

Finite element incremental contact analysis with various frictional conditions

The use of contacting components such as gear teeth in mesh and shrink-fitted shafts is very common in engineering practice. This paper deals with the development of a theoretical method which gives a solution for non-linear contact problems with irreversibility resulting from stick-slip phenomenon. The method is based on the finite element method and load incremental theory. The geometrical and the statical boundary conditions on contact surfaces are treated as additional conditions being independent of stiffness equations. As a result, the algorithm of calculation is simplified and only a part of the simultaneous equations related to the contact surfaces is required to be solved instead of the overall stiffness equations at each step. Furthermore, the magnitude of load causing a change in a contact condition of one contact nodepair is taken as a load increment, in analogy with the incremental iterative procedure for elastic-plastic problems. Therefore, the method provides a general and efficient method for analysis and design of such problems. As illustrative examples, the stick-slip behaviour of turbo-alternator end-bells and other problems are discussed. The calculated results show a reasonable agreement with experimental data and other solutions.     

Efficient selection of hybrids by protoplast fusion using drug resistance markers and reporter genes in Saccharomyces cerevisiae

We have developed a selection system for hybrids by protoplast fusion using dominant selective drug resistance markers, Tn601(903) against geneticin and AUR1-C against aureobasidin A, and reporter genes, ADH1p-PHO5-ADH1t and CLN2p-CYC1-lacZ, in Saccharomyces cerevisiae. To examine the effectiveness of this system, plasmids with each marker and reporter gene were introduced into auxotrophic sake yeasts. From the resulting transformants, eight colonies were screened by protoplast fusion in combination with the drug resistance markers and the reporter genes. Among them, seven strains were judged as hybrids between parental strains by analysis of growth on a minimal medium. This selection system was applied to wine yeasts having no genetic markers. Six strains were regarded as hybrids between parental strains by polymerase chain reaction/restriction fragment length polymorphism (PCR/RFLP) analysis of the MET2 gene and by karyotype analysis using a contour-clamped homogeneous electric field (CHEF). We propose that the plotoplast fusion using dominant selective geneticin- and aureobasidin A-resistance markers and reporter genes is useful for the selection of hybrids from wine yeasts, which are homothallic and have low sporulation ability.     

A note on upwinding and anisotropic balancing dissipation in finite element approximations to convective diffusion problems

In one dimension, Petrov—Galerkin nonsymmetric weighting for the convective diffusion equation can be interpreted as an added dissipation. The addition of an appropriate amount of dissipation can therefore give the same oscillation-free solutions as the ‘unwinding’, Petrov—Galerkin, finite element methods. The ‘balancing dissipation’ is optimally chosen so that excessive dissipation does not occur. A scheme is presented for extending this approach to two-dimensional problems, and numerical examples show that the new method can be used with improved computational efficiency.     

Determination of benzimidazole anthelmintics in livestock foods by HPLC

A simple and rapid liquid chromatographic method was developed for the simultaneous determination of twelve benzimidazole anthelmintics in livestock foods using reversed-phase high-performance liquid chromatography with photodiode array detection (PDA). A sample was homogenized with acetonitrile and n-hexane, and centrifuged. The acetonitrile phase was isolated and evaporated. The residue was dissolved in 0.1 mol/L carbonate buffer solution (pH = 9.1), sonicated, and then subjected to clean-up on a Bond Elut LRC-C18 cartridge. The benzimidazole compounds were separated isocratically on a Capcell Pak C18 UG 120 (5 microns, 150 x 4.6 mm i.d.) column and detected by PDA at 295 and 313 nm. Mixtures of acetonitrile and 0.05 mol/L ammonium acetate in mixing ratios of (20:80) and (40:60) were used as the mobile phase, and the flow-rate was 1.0 mL/min at 40 degrees C. The mean recoveries (n = 3) from 0.1-0.5 microgram/g added samples were 72.6-97.2% with coefficients of variation of 0.3-8.5%. The detection limits were 0.01-0.05 microgram/g.