Putative virulence factors of the Aeromonas spp. isolated from food and environment in Abu Dhabi, United Arab Emirates

Thirty randomly selected Aeromonas isolates from food and the environment in Abu Dhabi, United Arab Emirates, were characterized for putative virulence determinants, such as production of cytotoxin, cytotonic toxin, and hemolysin and their capacity to adhere to and invade Henle 407 cells in vitro. Seventy percent of the tested isolates were cytotoxin producers, and 80% were hemolytic. Cytotoxin was produced by 6 of 7 A. hydrophila strains, 6 of 13 A. caviae strains, and 6 of 7 A. veronii bv. sobria strains, mostly from food sources. A. schubertii, A. jandaei, and A. trota also produced both cytotoxin and hemolysin. All of the 30 isolates tested adhered to Henle 407 cells, but none were able to invade the cells, as determined with the in vitro assay. However, no significant correlation of the presence of these putative virulence factors was found among these aeromonad food isolates.     

Nutrition education alone improves dietary practices but not hematologic indices of adolescent girls in Iran

BACKGROUND: Iron-deficiency anemia is the most prevalent nutritional deficiency worldwide. Iron-deficiency anemia has particular negative consequences on women in their childbearing years, and its prevention is a high priority in most health systems. OBJECTIVE: This interventional study assessed the effect of nutrition education on hematologic indices, iron status, nutritional knowledge, and nutritional practices of high-school girls in Iran. METHODS: Sixty healthy 16- to 18-year-old girls were randomly selected from two high schools in the city of Ahvaz and divided into two equally matched groups, one that received nutrition education, and one that did not. The education group received instruction in face-to-face sessions, group discussions, and pamphlets for 2 months. The control group did not receive any information during the study. Hematologic tests, corpuscular indices, and serum ferritin levels were measured at baseline and after 2 months. Food-frequency questionnaires were administered and histories taken, clinical signs of nutritional deficiencies observed, anthropometric measurements taken, nutritional knowledge tested, practices determined, and lifestyle questionnaires administered to all subjects. RESULTS: There were no statistically significant differences in any baseline characteristics between the two groups. Scores for nutritional knowledge and practices of the education group were significantly higher after two months compared with the baseline (31.4 +/- 6 vs. 24.3 +/- 5.9 points, p < .001, and 31.2 +/- 5 vs. 28.4 +/- 5.7 points, p < .05, respectively). The scores in the control group showed no significant changes from baseline to 2 months. Mean corpuscular volume values were elevated in the education group (p < .001) but not in the control group. However, in the control group, serum ferritin concentrations showed about a 17% drop at the end of the study (p < .004). There were no changes in other hematologic, lifestyle, clinical, or anthropometric data compared with baseline after completion of the study in both groups. CONCLUSION: These findings indicate that nutritional education can improve knowledge of healthy nutrition and lifestyle choices. Focused nutritional education using available resources and correcting current dietary habits in a vulnerable group of young women may result in dietary changes that can ultimately improve iron intake.     

Use of hollow fibre-based liquid–liquid–liquid microextraction and high-performance liquid chromatography–diode array detection for the determination of phenolic acids in fruit juices

This paper describes a simple method based on three-phase hollow-fibre liquid-phase microextraction (HF-LPME) for the determination of phenolic acids in fruit juices. Analytes including gallic acid, p-hydroxy benzoic acid, caffeic acid, syringic acid, p-coumaric acid, ferulic acid, and cinnamic acid were separated and determined using high-performance liquid chromatography–photodiode array detection (HPLC–DAD). Parameters affecting the enrichment factors (EFs) were investigated. These compounds were extracted from 5 mL aqueous samples (pH 2) to a thin layer of organic solvent (hexyl acetate) phase impregnated into the pores of the polypropylene hollow fibre wall, and then back extracted to a basic acceptor solution (0.02 M NaOH). EFs ranged from 15 (gallic acid) to 408 (cinnamic acid). The RSD of the method for the analysis of spiked water and fruit juice samples varied from 3.1% to 11.3%. The LODs ranged from 0.01 (cinnamic acid) to 2.0 (caffeic acid) μg/L.     

Characterization of hot-air drying and infrared drying of spearmint (<Emphasis Type="Italic">Mentha spicata</Emphasis> L.) leaves

In this study, spearmint leaves were dried using hot-air (HA) and infrared (IR) techniques. Dried products were comprehensively analyzed for their drying time, specific energy consumption (SEC), rehydration, essential oil content and color changes. The IR drying process was carried out at radiation intensity levels of 1562, 3125 and 4688 W/m², emitter to sample distances of 10, 15 and 20 cm and air temperatures of 30, 40 and 50 °C. For HA drying, three levels of air temperature (30, 40 and 50 °C) and air velocity (0.5, 1 and 1.5 m/s) were applied. The results indicated that drying time, SEC and color changes were lower in IR drying of spearmint than in HA drying. IR drying gave the highest essential oil content (0.95 %) and rehydration ratio (0.788 kg water/kg dry matter (DM)). Totally, it was observed that IR drying of spearmint resulted in better quality preservation and had lower energy costs in comparison to HA drying.     

Screening of Food Samples for Zearalenone Toxin Using an Electrochemical Bioassay Based on DNA–Zearalenone Interaction

This study was conducted to design a biosensor as a new, rapid, and sensitive tool for investigation of binding of zearalenone with double-stranded DNA (dsDNA). Polydiallyldimethylammonium chloride (PDDA) as a polycation and multiwall carbon nanotubes (MWCNTs) provide a positively charged surface with a high surface area for the immobilization of dsDNA as a polyanion on the surface of pencil graphite electrode (PGE). Using the dsDNA/MWCNT–PDDA-modified PGE, it was possible to detect the interaction of zearalenone with dsDNA, which allowed us to apply the dsDNA-modified electrode for trace determination of zearalenone. The changes at the oxidation signal of adenine were evaluated before/after each modification/immobilization step. By using dsDNA/PDDA–MWCNT/PGE, zearalenone could be detected as low as 0.005 ng mL^?1. The relative standard deviation of five measurements of 0.5 ng mL^?1 zearalenone was found to be 4.2 %. Finally, the highly stable electrochemical biosensor was applied to analyze the zearalenone concentration in milk and wheat samples.

Open image in new window

Graphical Abstract xElectrochemical DNA Biosensor for Zearalenone detection

     

Comparison of pH-dependent sonodisruption of re-assembled casein micelles by 35 and 130 kHz ultrasounds

Sonodisruption behavior of re-assembled casein micelles was compared at two ultrasound frequencies (35 and 130 kHz) by turbidity measurement and laser-diffraction based particle size analysis. Sonochemical ultrasound (130 kHz) was more effective than power ultrasound (35 kHz) in micelle disruption. This was attributed to the higher strain rates generated upon implosion of cavities, as well as the liberation of more free radicals to the surrounding medium. The higher the pH of solution, the more effective was the ultrasonic disruption due to a looser expanded assembly of particles at higher pH values. Sonochemical ultrasound decreased the consistency coefficient of casein solutions and increased their flow index except at a pH value of 6.35, while power ultrasound did not affect the flow behavior of solutions across the whole pH range.     

Antioxidants and antiradicals in almond hull and shell (Amygdalus communis L.) as a function of genotype

To compare the antioxidant and antiradical activity of Amygdalus communis L. hulls and shells phenolic extracts in different genotypes, 18 A. communis L. genotypes were selected from those in Qooshchi, Qalgachi, Qovarchin Qale, Najaf Abad, Jamal Abad, Kahriz, Sfahlan of West and East Azerbayjan provinces of Iran in 2007. The fruits of these almonds were collected, their hulls and shells dried, ground and then methanolic extracts prepared from these hulls and shells. Total phenolic content was determined using the Folin–Ciocalteu (F–C) method. The extracts’ reducing power and scavenging capacity for radical nitrite, hydrogen peroxide and superoxide were evaluated. Significant differences were found in phenolic content of hulls and shells among various genotypes, radical scavenging capacity percentage varied significantly among genotypes and their hulls and shells. S₃-7 genotype with the highest phenolic content and antioxidant activity in its hulls represents a valuable genotype for procuring antioxidant phenolic compounds.     

PCR amplification of 18S rRNA,single cell protein production and fatty acid evaluation of some naturally isolated microalgae

Microalgae were isolated during a screening program from soil samples collected from paddy-fields of Fars province, south of Iran. The protein content was assayed by the Kochert method. Total genomic DNA were isolated and used for PCR amplification of the 18S rRNA gene. The sequences were determined for 12 species of microalgae. Some bioinformatic tools were used for more investigation on these biologic data. Total lipids from five microalgal species were extracted and used for determination of different types of fatty acids by gas chromatography–mass spectrometry method. In our experiments the green algae yielded a maximum protein of about 42% ± 1.64. The DNA sequences were published in the NCBI under specific accession numbers. The composition of fatty acids was mainly, myristic acid, palmitic acid, oleic acid, α-linolenic acid, and γ-linolenic acid.     

Withdrawal and lateral resistance of wood screw in beech, hornbeam and poplar

Withdrawal and lateral resistance of wood screw in three hardwood species of beech (Fagus orientalis Lipsky.), hornbeam (Carpinus betulus) and poplar (Populus deltoides 75/51) were studied. Measured values of ultimate withdrawal resistance of wood screws were compared with predicted values. Moreover, shear strength parallel to the grain of wood as an input parameter of the expression given by Eckelman was measured. Measured values of lateral resistance of wood screw connection were compared with predicted values of yield limit equations, and dowel bearing strength of wood as the input parameter of yield limit equations was measured. Results show that the expression by Eckelman gives a more accurate prediction than the expression given in NDS. Furthermore, yield limit equations accurately predicted observed yield mode, and in the three species lateral resistance was predicted lower than the measured values.     

Mechanical performance and dimensional stability of nano-silver impregnated densified spruce wood

The aim of this study was to investigate the effect of nano-silver treatment on some physical and mechanical properties of compressed low density wood species. Wood specimens were prepared from spruce (Picea abies), impregnated with water or nano-silver solution by empty cell process and compressed through radial direction in a hot press. The results showed that by nano-silver treatment, the spring back, bending strength (modulus of rupture) and impact load resistance were improved significantly. The best results for spring-back (0.04%) were seen in the nano-silver impregnated specimens that were compressed at 150°C for 4 hours. The modulus of rupture (MOR), modulus of elasticity (MOE) and impact load resistance in nano-silver impregnated densified specimens were gained for 53%, 41.2% and 175.7%, respectively (in comparison with controls). The maximum amounts of impact load resistance belonged to the nano-silver impregnated specimens which were compressed at press conditions of 150°C for 4 hours, showing the high ability of these specimens against high impact loads such as earthquake loads. An upcoming research (consisting of durability tests) will be done for evaluating the suitability of nano-silver impregnated densified spruce wood for exterior uses.