Heat transfer from an immersed vertical tube to a gas fluidized bed

Fluidization and heat transfer experiments have been conducted in gas fluidized beds of two different sizes, viz., 305 × 305 mm² and 305 × 152.5 mm² and with particles of silica sands ($\text{d}\text{?}{}_{\mathrm{p}}\text{= 167, 488, 504, and 745 μ}\text{m}$), glass beads (d_p = 427 μm) and millet seeds (d_p = 2064 μm) with immersed smooth vertical heated tubes of diameter 12.7, 28.6, and 50.8 mm. Important conclusions are drawn concerning the dependence of heat transfer coefficient on fluidization velocity, bed particle diameter, tube diameter and nature of bed fluidization. The heat transfer data are employed to assess the available literature correlations for heat transfer coefficient and for its maximum value.     

Effect of Fiber Bridging Stress on the Fracture Resistance of Silicon-Carbide-Fiber/Zircon Composites

The room-temperature fracture-resistance behavior ( R -curve) of unidirectional silicon-carbide-fiber-reinforced zircon-matrix composites has been studied experimentally and numerically. The composites showed strong rising R -curve behavior from experimental results that used in situ crack-length measurements taken via optical microscopy as well as the compliance method. A numerical calculation, based on the available models, then was performed to determine the bridging-stress function from the experimental R -curve. In addition, the effect of the residual stress and constituent properties on the bridging-stress function also has been considered in the numerical calculations. These results have indicated that the bridging-stress function, which controls the fracture resistance of ceramic composites, can be obtained from the carefully measured R -curve.     

Biocomposite proton‐exchange membrane electrolytes for direct methanol fuel cells

Poly(vinyl alcohol) (PVA)‐amino acid (AA) biocomposite membranes are prepared by blending PVA with AAs such as glycine, lysine (LY), and phenyl alanine followed by in situ crosslinking with citric acid (CA) and explored as a new class of biocomposite membrane electrolytes for direct methanol fuel cells (DMFCs). CA crosslinks with PVA through esterification offers adequate chemical, thermal, and morphological stability thereby produces methanol‐obstructing close‐packed polymeric network. These biocomposite membranes are characterized in terms of mechanical, thermal, sorption, and proton‐conducting properties. Hydrophilic nature of AA zwitterions significantly facilitates proton conduction and CA crosslinking mitigates methanol crossover through establishing appropriate balance between hydrophilic/hydrophobic domains. The rational design of membrane microstructure with proper arrangement of hydrophobic/hydrophilic domains is a key to enhance electrochemical selectivity of PVA‐AA/CA biocomposite membranes. Biocomposite membrane comprising LY exhibits nearly threefold higher electrochemical selectivity in relation to PVA/CA blend membrane. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43514.     

Effect of Silicon Activity on Liquid-Phase Sintering of Nitrogen Ceramics

Volatilization resulting from the thermal decomposition of Si₃N₄ causes the large weight loss and desintering phenomenon observed during pressureless sintering of Si₃N₄-5% MgO and sialon (z =2)-5% MgO. The addition of a few weight percent of Si to the powder suppresses this volatilazation and helps to achieve fully dense Si₃N₄ components.     

Mechanical and thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticized starch composites

Thermoplasticized starch (TPS) filled poly(lactic acid) (PLA) blends are usually found to have low mechanical properties due to poor properties of TPS and inadequate adhesion between the TPS and PLA. The purpose of this study was to investigate the reinforcing effect of wood fibers (WF) on the mechanical properties of TPS/PLA blends. In order to improve the compatibility of wood with TPS/PLA blends, maleic anhydride grafted PLA (MA‐g‐PLA) copolymer was synthesized and used. TPS, TPS/PLA blends, and WF reinforced TPS/PLA composites were prepared by twin‐screw extrusion and injection molded. Scanning electron microscope and crystallinity studies indicated thermoplasticity in starch. WF at two different weight proportions, that is, 20% and 40% with respect to TPS content were taken and MA‐g‐PLA at 10% to the total weight was chosen to study the effect on mechanical properties. At 20% WF and 10% MA‐g‐PLA, the tensile strength exhibited 86% improvement and flexural strength exhibited about 106% improvement over TPS/PLA blends. Increasing WF content to 40% further enhanced tensile strength by 128% and flexural strength by 180% with respect to TPS/PLA blends. Thermal behavior of blends and composites was analyzed using dynamic mechanical analysis and thermogravimetric analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46118.     

The Importance of G Protein-Coupled Receptor Kinase 4 (GRK4) in Pathogenesis of Salt Sensitivity,Salt Sensitive Hypertension and Response to Antihypertensive Treatment

Salt sensitivity is probably caused by either a hereditary or acquired defect of salt excretion by the kidney, and it is reasonable to consider that this is the basis for differences in hypertension between black and white people. Dopamine acts in an autocrine/paracrine fashion to promote natriuresis in the proximal tubule and thick ascending loop of Henle. G-protein receptor kinases (or GRKs) are serine and threonine kinases that phosphorylate G protein-coupled receptors in response to agonist stimulation and uncouple the dopamine receptor from its G protein. This results in a desensitisation process that protects the cell from repeated agonist exposure. GRK4 activity is increased in spontaneously hypertensive rats, and infusion of GRK4 antisense oligonucleotides attenuates the increase in blood pressure (BP). This functional defect is replicated in the proximal tubule by expression of GRK4 variants namely p.Arg65Leu, p.Ala142Val and p.Val486Ala, in cell lines, with the p.Ala142Val showing the most activity. In humans, GRK4 polymorphisms were shown to be associated with essential hypertension in Australia, BP regulation in young adults, low renin hypertension in Japan and impaired stress-induced Na excretion in normotensive black men. In South Africa, GRK4 polymorphisms are more common in people of African descent, associated with impaired Na excretion in normotensive African people, and predict blood pressure response to Na restriction in African patients with mild to moderate essential hypertension. The therapeutic importance of the GRK4 single nucleotide polymorphisms (SNPs) was emphasised in the African American Study of Kidney Disease (AASK) where African-Americans with hypertensive nephrosclerosis were randomised to receive amlodipine, ramipril or metoprolol. Men with the p.Ala142Val genotype were less likely to respond to metoprolol, especially if they also had the p.Arg65Leu variant. Furthermore, in the analysis of response to treatment in two major hypertension studies, the 65Leu/142Val heterozygote predicted a significantly decreased response to atenolol treatment, and the 65Leu/142Val heterozygote and 486Val homozygote were associated in an additive fashion with adverse cardiovascular outcomes, independent of BP. In conclusion, there is considerable evidence that GRK4 variants are linked to impaired Na excretion, hypertension in animal models and humans, therapeutic response to dietary Na restriction and response to antihypertensive drugs. It may also underlie the difference in hypertension between different geographically derived population groups, and form a basis for pharmacogenomic approaches to treatment of hypertension.     

Note on flash and distillation systems

Flash and distillation systems evolving on the equilibrium manifold possess stable steady states when the molar flows and the boundary conditions are fixed and a vapor and liquid phase is present at all times. The results extend the range of validity of a local stability theorem for linear, constant molar overflow systems due to Acrivos and Amundson. The approach to stability analysis is motivated by the tangent plane method developed by Gibbs to open systems as it takes advantage of the negative curvature of the entropy surface to construct a Lyapunov function. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3322–3332, 2013     

Influence of Distributed Particle Size on the Determination of the Parabolic Rate Constant for Oxidation by the Powder Method

The established analysis for the study of oxidation using powder specimens is based on the assumption of monosized particles. The experiments, however, are conducted on powders with a distributed particle size. Here we present a statistical approach for the calculation of the rate constant for oxidation. The results of the analysis are applied to new data on oxidation studies of dense powders of silicon carbonitride amorphous ceramics. The monosized model requires a wide range of values for the rate constant to fit the short term and the long-term data, leading to considerable ambiguity in the estimate of the parabolic rate constant, k _p, for oxidation. In contrast the statistical model fits over the entire range of data, yielding a much more reliable value for k _p. For example, the monosized approach gave a value in the range 19.7 × 10⁻¹⁸ < k _p < 2.7 × 10⁻¹⁸ m²/s. In contrast, the statistical model yields a specific value of 4.5 × 10⁻¹⁸ m²/s.     

Interaction of lanthanide and actinide with BaHfO3 perovskite: A case study with cerium and uranium

Speciation of actinide (An) and lanthanide (Ln) in technologically important ceramics is very important from both fundamental as well as technological aspects. The intrinsic structural flexibility of perovskite containing AO₆ and BO₁₂ polyhedra makes them suitable and rich hosts for An and Ln. In this work, emphasis was given to deciphering information such as oxidation state, local dopant site, charge compensating defects, excited state kinetics, and so forth in BaHfO₃ (BHO) related to dopant uranium (BHO-U) and cerium (BHO-Ce). Several spectroscopic techniques namely, time-resolved photoluminescence (TRPL), positron annihilation lifetime spectra (PALS), and thermoluminescence (TL) spectroscopy coupled with density functional theory (DFT) were employed to probe the same. Ce and U though are distributed at both Ba and Hf sites, Ce prefers the former, while U prefers the latter site. Uranium on the other hand stabilizes as U⁶⁺ in the form of octahedral uranate ion giving green emission. PALS suggested the formation of defects in BHO-Ce and BHO-U with oxygen vacancies predominating in the former whereas BHO-U perovskites are loaded with cation vacancies and vacancy clusters. These cation vacancies are responsible for lower TL output in BHO-U. TL measurements also suggested cerium doping leads to a higher density of deeper traps in BHO-Ce compared to uranium doping in BHO-U which is in concurrence with DFT results and may have implications in designing afterglow phosphors based on perovskite. We believe this work would have a long-term impact on exploring the potential of perovskite for nuclear waste host and afterglow phosphors applications.