Effect of various efficient vulcanization cure systems on the compression set of a nitrile rubber filled with different fillers

Effect of various efficient vulcanization (EV) sulfur cure systems on the compression set of a nitrile rubber filled with carbon black and silica/silane fillers was examined. The cure systems had different amounts of thiuram and sulfenamide accelerators and elemental sulfur, whilst the loading of zinc oxide and stearic acid activators was kept constant. The fillers had surface areas from 35 to 175 m²/g. In this study, the lowest compression set was measured for the rubber filled with carbon black with 78 m²/g surface area, which was cured with an EV cure system made of a small amount of elemental sulfur and large amounts of the two accelerators. Interestingly, a small change in the amount of elemental sulfur had a bigger effect on the compression set than did large changes in the loading of the accelerators in the cure system. Among the fillers, carbon black caused less compression set of the rubber vulcanizate than the silica/silane system did. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41512.     

Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents

In this study, plasticized poly(vinyl chloride) (PVC) composites with different nanofillers, including single‐walled carbon nanotubes (SWCNTs), organoclay, TiO₂, and ZnO nanoparticles, were prepared, and their effects on plasticizer migration were investigated. Scanning electron micrographs revealed the dispersion quality of the nanofillers in the polymer matrix. It had a significant influence on the performance of the nanofillers in the process of plasticizer migration. Migration and exudation tests showed that the nanofillers could efficiently hinder plasticizer migration. On the basis of these results, we concluded that carbon nanotubes were the best antimigration agent in the plasticized system. This was ascribed to the high aspect ratio of the SWCNTs and the good interactions between them and the plasticizer. Also, TiO₂ nanoparticles showed a better performance compared to the ZnO nanoparticles. This was due to the more homogeneous dispersion of the TiO₂ in the polymer matrix and the higher surface area of the particles. The differential scanning calorimetry thermograms were in good agreement with the migration tests. The lowest change in the glass‐transition temperature was observed for the composite filled with SWCNTs. This indicated that a lower amount of the plasticizer migrated from PVC. The thermogravimetric analysis curves showed that the incorporation of the nanofillers improved the thermal stability of the PVC. The results could be useful for determining the efficiency of plasticized PVC in applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42559.     

空冷型质子交换膜燃料电池实验研究

对实验室自制的空冷型质子交换膜燃料电池(PEMFC)在不同工况时的稳定性、负载阶跃响应、单体电池电压分布以及表面温度分布开展了实验研究。实验结果表明:定期阳极排气可维持空冷型PEMFC长时间稳定运行;大负载条件下,单体电池电压分布均匀性降低,呈现两边高、中间低的现象;电池组温度分布与单体电池电压分布具有一致性。该工作对于空冷型PEMFC性能研究以及燃料电池系统效率提升具有一定的指导和参考价值。     

Microtexture Analysis of the Alumina Scale in Thermal Barrier Coatings

Transmission electron microscopy‐based grain orientation mapping method was employed to investigate the microtexture of the alumina scale formed in commercial thermal barrier coatings (TBCs) with two standard types of Pt‐enriched bond coats. Reliable orientation/phase maps with a spatial resolution down to 2 nm were acquired on the alumina grains. It was observed that the alumina scale on the Pt‐aluminide β‐phase bond coat has a stronger c‐axis texture normal to the bond coat surface, in comparison with that on the Pt‐diffused γ/γ′‐phase bond coat. The microtexture of the alumina scale could affect its effective coefficient of thermal expansion, which is a contributor to the severity of the bond coat rumpling mechanism of TBCs failure.     

Using short‐term resource scheduling for assessing effectiveness of CCS within electricity generation subsector

A new methodology for assessing the effectiveness of carbon capture and storage (CCS) that does explicitly consider the detailed operation of the target electricity system is proposed. The electricity system simulation consists of three phases, each one using a modified version of an economic dispatch problem that seeks to maximize the producers’ and consumers’ surplus while satisfying the technical constraints of the system. The economic dispatch is formulated as a dynamic mixed‐integer nonlinear programming problem and implemented in general algebraic modelling system (GAMS). The generating unit with CCS is designed and simulated using Aspen Plus®. In the first case study, the operation of the IEEE RTS ’96 (Institute of Electrical and Electronics Engineers One‐Area Reliability Test System—1996) is simulated with greenhouse gas (GHG) regulation implemented in the form of CO₂ permits that generators need to acquire for every unit of CO₂ that it is emitted. In the second case study, CCS is added at one of the buses and the operation of the modified IEEE RTS ’96 is again simulated with and without GHG regulation. The results suggest that the detailed operation of the target electricity system should be considered in future assessments of CCS and a general procedure for undertaking this for any GHG mitigation option is proposed. Future work will use the novel methodology for assessing the effectiveness of generating units with flexible CO₂ capture. © 2015 American Institute of Chemical Engineers AIChE J, 61: 4210–4234, 2015     

Unexploited Thapsia garganica,Orlaya maritima,and Retama raetam Seeds: Potential Sources of Unsaturated Fatty Acid and Natural Antioxidants

Total lipid contents, fatty acid compositions, phenolic profiles and antioxidants activities of seeds from Thapsia garganica, Orlaya maritima, and Retama raetam were investigated. The oil values were more than 26 %, except seeds of R. raetam (ca. 3 %). Unsaturated fatty acids accounted for the majority of the fatty acids (more than 75 %). Oleic and linoleic acid were the predominant fatty acids. Total phenolic compounds (24–104 mg GAE g^?1 DR), total flavonoids (4–102 mg QE g^?1g DR), total tannins (28–85 mg GAE g^?1 DR) and condensed tannins (0.62–131 mg CE g^?1 DR) were also determined. The antioxidant activities using different assays were evaluated. The predominant detected classes were the phenolic acids (42–85 %) and the flavonoids (11–48 %). The major phenolic acids were caffeic, trans‐4‐hydroxy‐3‐methoxycinnamic, p‐coumaric, and gallic acid. The predominant flavonoids were quercetin, luteolin, naringin, apigenin, and kaempferol. This study brings attention to the medicinal importance of these species as a source of oil and antioxidant molecules.     

One‐Pot Lipase Entrapment Within Silica Particles to Prepare a Stable and Reusable Biocatalyst for Transesterification

In order to enhance the reusability, Rhizomucor miehei lipase was entrapped in a single step within silica particles having an oleic acid core (RML@SiO₂). Characterization of RML@SiO₂ by scanning and transmission electron microscopy and Fourier transform infrared studies supported the lipase immobilization within silica particles. The immobilized enzyme was employed for transesterification of cottonseed oil with methanol and ethanol. Under the optimum reaction conditions of a methanol‐to‐oil molar ratio of 12:1 or ethanol‐to‐oil molar ratio of 15:1, stirring speed of 250 revolutions/min (flask radius = 3 cm), reaction temperature of 40 °C, and biocatalyst concentration of 5 wt% (with respect to oil), more than 98 % alkyl ester yield was achieved in 16 and 24 h of reaction duration in case of methanolysis and ethanolysis, respectively. The immobilized enzyme did not require any buffer solution or organic solvent for optimum activity; hence, the produced biodiesel and glycerol were free from metal ion or organic molecule contamination. The activation energies for the immobilized enzyme‐catalyzed ethanolysis and methanolysis were found to be 34.9 ± 1.6 and 19.7 ± 1.8 kJ mol^?1, respectively. The immobilized enzyme was recovered from the reaction mixture and reused in 12 successive runs without significant loss of activity. Additionally, RML@SiO₂ demonstrated better reusability as well as stability in comparison to the native enzyme as the former did not lose the activity even upon storage at room temperature (25–30 °C) over an 8‐month period.     

Investigation of Heat‐Induced Degradation of Virgin Olive Oil Using Front Face Fluorescence Spectroscopy and Chemometric Analysis

A simple setup using a 365‐nm light‐emitting diode coupled to a USB spectrometer through an optical fiber, in a front‐face fluorescence configuration, was used to investigate the heat‐induced deterioration of virgin olive oil at different heating temperatures and times. The samples were heated for 30, 60, 120 and 180 min for every temperature setting of 140, 160 and 180 °C, respectively. Two important results are reported in this article. First, a neo‐formed compound around 665 nm due to the degradation of chlorophyll was observed. This new peak was attributed to pyropheophytins. The second result showed an important rise of the peak around 489 nm, which corresponded to the oxidation products. The correlation obtained between the peroxide value and the 489 nm peak using principal component analysis revealed the mechanism of the oxidation process. It further showed that the peak around 489 nm is a direct consequence of the degradation of hydroperoxide.