The effects of consuming probiotic‐fermented milk on the immune system: A review of scientific evidence

Fermented dairy products are commonly used as the most efficient delivery vehicle for probiotics. These foods are well known for promoting the positive health benefits of consuming probiotics. Among their beneficial effects, their immunomodulatory properties have attracted a great deal of interest in recent years. Reports, both in vitro and in vivo, on the beneficial effects of consuming fermented milks containing probiotics have demonstrated the enhancement of various parameters in animal (e.g. rats and mice) and human immune systems, such as the production of cytokines and mediators by antigen‐presenting cells and cellular markers for different cell populations. Hence, the purpose of this review was to provide an overview of the scientific literature concerning the potential of probiotic‐fermented milks to influence the host's immune system, thereby modulating the immune response in a positive fashion.     

Influence of variations in methodology on populations of Listeria monocytogenes recovered from lettuce treated with sanitizers

The elimination of Listeria monocytogenes inoculated onto a piece of cut iceberg lettuce (3.8 by 3.8 cm) by treatment with chlorinated water (200 micrograms/ml free chlorine) and a 0.5% (wt/vol) solution of FIT Professional Line Antibacterial Cleaner (FIT) was investigated. The efficacy of the two sanitizers was not influenced by the composition of the medium used to culture the L. monocytogenes used in the inocula, the number of strains in the inoculum, or the recovery medium used to enumerate the pathogen on lettuce after treatment. Drying inoculum on lettuce for 45 min at 37 degrees C caused more cells to die or not be retrieved compared with drying inoculum for 30 min at 25 degrees C. However, the percentage of cells in the inoculum recovered from lettuce treated with chlorine or FIT was not significantly different, regardless of the drying method. Stomaching, homogenizing, or stomaching followed by homogenizing lettuce treated with sanitizers resulted in recovery of similar numbers of L. monocytogenes, indicating that stomaching and homogenizing are equivalent in extracting cells; the sequential use of both processing methods did not substantially increase the efficiency of recovery. Washing lettuce with water or treating lettuce with 200 micrograms/ml chlorine or FIT resulted in decreases in populations of 0.60, 1.76, and 1.51 log CFU per lettuce piece, respectively, regardless of variations in test parameters. Reductions caused by sanitizers were significantly greater (alpha = 0.05) than that observed for water but not significantly different from each other. It is concluded that evaluation of sanitizers for their efficacy in killing L. monocytogenes on lettuce can be determined by spot inoculating 50 microliters of a five-strain mixture of cells from 24-h cultures suspended in 5% horse serum albumen, followed by drying the inoculum for 45 min at 37 degrees C, treatment by submerging in 50 ml of sanitizer for 5 min, stomaching samples in 50 ml of Dey-Engley neutralizing broth for 2 min, and enumerating survivors on modified Oxford medium.     

Verocytotoxigenic Escherichia coli O157 in beef and sheep abattoirs in Ireland and characterisation of isolates by Pulsed-Field Gel Electrophoresis and Multi-Locus Variable Number of Tandem Repeat Analysis

This study aimed to investigate verocytotoxigenic Escherichia coli O157 in the largest beef and sheep slaughter plants in Ireland over a one-year period. Samples consisted of pooled rectal swabs (n = 407) and pooled carcass swabs (n = 407) from 5 animals belonging to the same herd or flock and minced meat (n = 91) from the same sampling date. E. coli O157 isolates were characterised using PCR for a range of genes, i.e. 16S, rfbE, fliC, vtx1, vtx2, eaeA and confirmed VTEC O157 isolates were tested for antimicrobial susceptibility and typed using Pulsed-Field Gel Electrophoresis (PFGE) and Multi-Locus Variable Number of Tandem Repeat Analysis (MLVA). VTEC O157 was isolated from 7.6% and 3.9% of bovine rectal and carcass swab samples and from 5.8% and 2.9% of ovine rectal and carcass swab samples respectively. None of the bovine minced meat samples (n = 77) and only one of the 14 ovine minced meat samples was positive for VTEC O157. Following PFGE and MLVA, cross contamination from faeces to carcasses was identified. While PFGE and MLVA identified the same clusters for highly related strains, MLVA discriminated better than PFGE in addition to being more rapid and less labour intensive. Results showed that cattle and sheep presented for slaughter in Ireland harbour VTEC O157, and although the levels entering the food chain are low, this should not be overlooked as possible sources of zoonotic infection; molecular typing was able to demonstrate relationships among strains and could be used to elucidate the sources of human infection.     

Identification of modes of fracture in a 2618-T6 aluminum alloy using stereophotogrammetry

The identification and the development of a quantification technique of the modes of fracture in fatigue fracture surfaces of a 2618-T6 aluminum alloy were developed during this research. Fatigue tests at room and high temperature (230 °C) were carried out to be able to compare the microscopic fractographic features developed by this material under these testing conditions. The overall observations by scanning electron microscopy (SEM) of the fracture surfaces showed a mixture of transgranular and ductile intergranular fracture. The ductile intergranular fracture contribution appears to be more significant at room temperature than at 230 °C. A quantitative methodology was developed to identify and to measure the contribution of these microscopic fractographic features. The technique consisted of a combination of stereophotogrammetry and image analysis. Stereo-pairs were randomly taken along the crack paths and were then analyzed using the profile module of MeX software. The analysis involved the 3-D surface reconstruction, the trace of primary profile lines in both vertical and horizontal directions within the stereo-pair area, the measurements of the contribution of the modes of fracture in each profile, and finally, the calculation of the average contribution in each stereo-pair. The technique results confirmed a higher contribution of ductile intergranular fracture at room temperature than at 230 °C. Moreover, there was no indication of a direct relationship between this contribution and the strain amplitudes range applied during the fatigue testing.     

Stabilization of Pd,Pt and Ru nanoparticles by optically active CO/styrene copolymers

Fully isotactic, chiral CO/styrene copolymers were used as stabilizers for palladium, platinum and ruthenium nanoparticles synthesis. The tuning of copolymer/metal ratio and metal concentration were found to be key parameters in order to adjust the size and the agglomeration tendency of the metallic nanoclusters. These new materials were fully characterized by elemental analysis, infrared, solid state ¹³C MAS NMR spectroscopies, and transmission electronic microscopy. Platinum and ruthenium nanoparticles were tested as catalysts in the ethyl pyruvate hydrogenation, giving high activities; in this preliminary work, no enantioselectivity induction was observed.     

Rhodium complexes containing chiral P-donor ligands as catalysts for asymmetric hydrogenation in non conventional media

Abstract  

Rhodium-catalysed asymmetric hydrogenation using P-donor ligands, such as new fluorinated (R)-BINOL and azadioxaphosphabicyclo[3.3.0]octane derivatives was carried out in different reaction media such as organic solvent (CH₂Cl₂), ionic liquid ([BMI][PF₆]), supercritical carbon dioxide (scCO₂) and [BMI][PF₆]/scCO₂ mixture. The best enantioselectivities were obtained in neat [BMI][PF₆], allowing a recycling up to ten times without activity loss. However, the enantioselectivity was lost due to ligand leaching. The ionic liquid phase containing rhodium molecular species was supported on functionalized multi-walled carbon nanotubes in order to improve the recycling, but unfortunately the asymmetric induction was lost upon catalyst immobilization.     

Synthesis of new amphiphilic water‐stable hyperbranched polycarbosilane polymers

New amphiphilic hyperbranched polymers possessing hydrophobic skeletons and hydrophilic terminal groups have been prepared and characterized. The synthetic strategy involved the formation of a new stable matrix with aromatic units within a carbosilane backbone, as well as the use of a classical polycarbosilane matrix. Both of them with allyl groups on the surface have narrow polydispersity values. Molecular weight and polydispersity of the hyperbranched polymers were obtained using gel permeation chromatography with multi‐angle light scattering, and determination of the average number of functional groups present on the surface was achieved using ¹H NMR spectroscopy. The introduction of ionic groups was carried out via thiol–ene reactions with various thiol derivatives. The thermal properties of the polymers were also analysed using differential scanning calorimetry and zeta potential measurements. © 2013 Society of Chemical Industry     

Integrated biological and chemical analysis of organochlorine compound pollution and of its biological effects in a riverine system downstream the discharge point

Pollution in riverine systems, along with its biological effects, may propagate downstream even at considerable distances. We analyzed the organochlorine compound (OC) pollution in a section of the low Ebro River (Northeast Spain) downstream a long-operating chlor-alkali plant. Maximal levels of OCs and of their associated dioxin-like biological activity occurred in residue samples from the plant, and persisted in river sediments some 40 km downstream (Xerta site). Biological analysis at multiple organization levels in local carp (Cyprinus carpio, EROD, Cyp1A mRNA expression in the liver, hepatosomatic index, condition factor, and micronuclei index in peripheral blood) showed a similar pattern, with a maximal impact in Ascó, few kilometers downstream the plant, and a clear reduction at Xerta. This combination of chemical, molecular, cellular and physiological data allowed the precise assessment of the negative impact of the chlor-alkali plant on the quality of river sediments and on fish, and suggests that sediments may be a reservoir for toxic substances even in dynamic environments like rivers.