Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Bulk multifilled n- and p-type skutterudites with La as the main filler were fabricated using the spark plasma sintering (SPS) method. The thermoelectric properties and thermal stability of these skutterudites were investigated. It was found that the interactions among the filling atoms also play a vital role in reducing the lattice thermal conductivity of the multifilled skutterudites. ZT = 0.76 for p-type La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ and ZT = 1.0 for n-type La_0.3Ca_0.1Al_0.1Ga_0.1In_0.2Co_3.75Fe_0.25Sb₁₂ skutterudites have been achieved. Furthermore, the differential scanning calorimetry (DSC) results show that there is no skutterudite phase decomposition till 750°C for the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ sample. The thermal stability of the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ skutterudite is greatly improved. Using the developed multifilled skutterudites, the fabricated module with size of 50 mm × 50 mm × 7.6 mm possesses maximum output power of 32 W under the condition of hot/cold sides = 600°C/50°C.     

Structure and formation of ant transportation networks

Many biological systems use extensive networks for the transport of resources and information. Ants are no exception. How do biological systems achieve efficient transportation networks in the absence of centralized control and without global knowledge of the environment? Here, we address this question by studying the formation and properties of inter-nest transportation networks in the Argentine ant (Linepithema humile). We find that the formation of inter-nest networks depends on the number of ants involved in the construction process. When the number of ants is sufficient and networks do form, they tend to have short total length but a low level of robustness. These networks are topologically similar to either minimum spanning trees or Steiner networks. The process of network formation involves an initial construction of multiple links followed by a pruning process that reduces the number of trails. Our study thus illuminates the conditions under and the process by which minimal biological transport networks can be constructed.     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

An Investigation of Capacitors for Flying Capacitor Converters

Multilevel converters can essentially reduce harmonics even when their switching frequency is low. Among the various topologies of the multilevel converters, flying capacitor converters are considered to be promising converters for realizing high power density. However, the main circuit of the flying capacitor converters has many capacitors. Therefore, in this study, the volume of the capacitors in the flying capacitor converters is determined by taking into consideration the allowable ripple voltage and temperature rise in the capacitor. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 81–91, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22361     

Improvement of both adsorption performance of silica gel and heat transfer characteristics by means of heat exchange modulation for a heat pump

In order to provide high performance silica gel for an adsorption heat pump (AHP), gels were synthesized using the sol-gel process modified with a new method of controlling the primary gel particle growth by the addition of aluminum ion. In this process, the pores of the silica gel synthesized became smaller when aluminum ion was added in the washing process. Furthermore, this silica gel adsorbed more water at a low region of water vapor pressure and its adsorption ability did not change after 100 repetitive times of adsorping/desorping water vapor. The experimental results from the water vapor adsorption on the silica gel agreed well with theoretical results obtained under the Lump model for heat transfer and intraparticle diffusion model for mass transfer. A new direct heat exchange silica gel module (DS-module) for the AHP was provided, and the heat transfer characteristics during the operation for the adsorption of water vapor were both experimentally and theoretically determined. The period of the adsorption for the DS-module was shorter than that for a silica gel/tube module. Therefore, with the addition of the DS-module the heat transfer in the AHP adsorber was sufficiently enhanced and the maximum heat generation power for the 2-mm-thick DS-module was obtained. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(7): 420–433, 1996     

A molten metal jet impingement on a flat spreading surface

ABSTRACT

In the event of a severe accident, past experiences such as Three Mile Island and Fukushima Daichi have shown that the reactor core of a light-water nuclear reactor, if not properly safeguarded, could go through a meltdown. This will be followed by the formation of a corium, a mix of molten fuel elements, and liquid metals from the Reactor Pressure Vessel (RPV). In the worst-case scenario, a melt through from the RPV can occur and lead to the spreading of the corium, in the form of a molten element’s jet impinging on a flat concrete structure of the Primary Containment Vessel (PCV). To enhance the decommissioning and the safety procedure, scope of the present article is to deepen the understanding of the phenomena involved in the mentioned scenario, mainly jet-instability and molten material spreading. In the present study, experiments were carried out, by using corium simulant materials such as Copper and Tin, to investigate the link between the instability of the gravity-driven molten metal jet and the impinging followed by its spreading over a flat area.     

Compositional Dependence of Normal Spectral Emissivity of Molten Cu-Fe Alloy

Metallurgical and Materials Transactions B - Normal spectral emissivity of molten Cu-Fe alloy with different compositions was measured at the wavelength of 807 nm using an electromagnetic...     

Dynamic Changes in Reactive Oxygen Species in the Shoot Apex Contribute to Stem Cell Death in Arabidopsis thaliana

In monocarpic plants, stem cells are fated to die. However, the potential mechanism of stem cell death has remained elusive. Here, we reveal that the levels of two forms of reactive oxygen species (ROS), superoxide anion free radical (O2·−) and hydrogen peroxide (H₂O₂), show dynamic changes in the shoot apex during the plant life cycle of Arabidopsis thaliana. We found that the level of O2·− decreased and disappeared at four weeks after bolting (WAB), while H₂O₂ appeared at 3 WAB and showed a burst at 5 WAB. The timing of dynamic changes in O2·− and H₂O₂ was delayed for approximately three weeks in clv3-2, which has a longer lifespan. Moreover, exogenous application of H₂O₂ inhibited the expression of the stem cell determinant WUSCHEL (WUS) and promoted the expression of the developmentally programmed cell death (dPCD) marker gene ORESARA 1 (ORE1). These results indicate that H₂O₂ triggers an important signal inducing dPCD in stem cells. Given that O2·− plays roles in maintaining WUS expression and stem cell activity, we speculate that the dynamic shift from O2·− to H₂O₂ in the shoot apex results in stem cell death. Our findings provide novel insights for understanding ROS-mediated regulation during plant stem cell death.     

Physicochemical properties of monosodium glutamate-compounded tapioca starch exceeds those of simple heat-moisture treated starch

Monosodium glutamate (GluNa)-compounded starch was prepared by heat-moisture treating a mixture of tapioca starch and GluNa. GluNa-compounded starch exhibited a higher gelatinization temperature and reduced swelling and solubility, essentially lower hardness of the granule center, and paste viscosity than those of the heat-moisture treated tapioca starch and the untreated starch. However, its appearance, unit chain length distribution, and α-amylase digestibility were similar to those of the heat-moisture treated tapioca. It is thus concluded that GluNa compounding is useful for providing a unique type of starch that possesses a less swollen and viscous texture than that produced with simple heat-moisture treatment.