Effect of high hydrostatic pressure on physicochemical and biochemical properties of milk

Interest in high hydrostatic pressure (HHP) applications on milk and dairy products has recently increased as HHP offers a new technology for food preservation to the food industry. Although HHP-induced microbial destruction, rennet or acid coagulation of milk and increase in cheese yield has been reported, the actual effect of HHP application on milk constituents still remains to be unexplained. Therefore, we have analyzed the effect of HHP on physicochemical and biochemical properties such as turbidity, pH and especially protein micelle surface hydrophobicity of milk proteins. To serve for this purpose, milk samples with different fat contents were pressurized from 110 to 440 MPa at 25 °C for 10 and 20 min. Turbidity decreased with pressure increase and there was a slight change in pH. In order to measure the extent of exposure of hydrophobic groups of proteins to HHP, the method described by Bonomi et al. [1], based on use of a fluorescent probe, was utilized. In the light of the results obtained, it can be concluded that HHP has an effect on non-covalent interactions and especially hydrophobic bonds in milk. As the pressure is increased from 110 to 440 MPa, the micelles possibly decompose into sub-micelles and the embedded hydrophobic areas inside these micelles re-position in such a way that they can readily interfere with the fluorescent marker, ANS. These results may lead to practical applications of HHP treatment in the dairy industry to produce microbiologically safe, minimally processed products with high nutritional and sensory quality and novel texture.     

Enhanced production of isoamyl acetate from beet molasses with addition of fusel oil by Williopsis saturnus var. saturnus

Fusel oil which contains high level of amyl alcohols (approximately 45–55%) is a by-product obtained from the distillation of alcohol made by fermentation of molasses. Williopsis saturnus is a yeast which is able to convert isoamyl alcohol into isoamyl acetate. The aim of this study was to increase the formation of isoamyl acetate by the addition of fusel oil at the ratios of 1%, 2% and 3% (v/v) to molasses based fermentation medium using W. saturnus. It was found out that bioconversion of added fusel oil into isoamyl acetate was possible and an addition of 1% fusel oil led to an increase in isoamyl acetate concentration from 118 to 354 mg/L.     

Application of antimicrobial ice for extending shelf life of fish

In this study, we investigated whether wild-thyme (Thymus serpyllum) hydrosol had a preserving effect against spoilage of freshwater fish. Sensorial characteristics, chemical freshness indicator contents, and microbial counts (total aerobes, psychrotrophics, Enterobacteriaceae, fecal coliform bacteria, Aeromonas spp., and Pseudomonas spp.) of whole ungutted and gutted Transcaucasian barb (Capoeta capoeta capoeta Guldenstaedt, 1772) stored on ice produced from wild-thyme hydrosol and tap water at 4 degrees C for 20 days were compared. The results did not reveal any significant (P > 0.05) differences in the microbial counts, sensorial characteristics, pH, and total volatile basic nitrogen values between gutted and ungutted groups. Sensory evaluation and microbiological and chemical analyses indicated that the storage of the fish on ice produced from wild-thyme hydrosol had a significant increase in shelf life by at least 15 to 20 days.     

Polyamorphism in Aluminum Nitride: A First Principles Molecular Dynamics Study

The high‐pressure behavior of amorphous aluminum nitride is investigated for the first time by means of ab initio molecular dynamics simulations. It is found to undergo two successive first‐order phase transformations with the application of pressure. The first one is a polyamorphic phase transition in which the low‐density amorphous phase transforms into a high‐density amorphous phase having an average coordination number of about 4.6. The high‐density amorphous structure transforms back to a low‐coordinated amorphous network upon pressure release but its density is higher than that of the original low‐density amorphous phase. The second phase change is the crystallization of the high‐density amorphous state into a rocksalt structure. A careful analysis suggests that the hexagonal‐like nanoclusters presented in amorphous aluminum nitride prevent the formation of a very dense amorphous phase (about sixfold coordinated) during the first phase transition and they act as a nucleation center for the crystallization process.     

Effect of Dynamic Compaction on the Retention of Tetragonal Zirconia and Mechanical Properties of Alumina/Zirconia Composites

Dynamic consolidation techniques were employed to investigate the retention of tetragonal zirconia and degree of consolidation in alumina/zirconia powder compacts. Heating the specimens prior to explosive shock compaction increased the tetragonal-phase retention significantly. Low shock pressures yielded no macrocracking, although final densities were low (60% to 70% of the theoretical density). Heat treatment following dynamic consolidation enhanced the retention of the tetragonal zirconia polymorph regardless of the shock pressure employed. Compact densities were increased to over 90% of theoretical at relatively low sintering temperatures (1300°C). Hardness, toughness, and Young's modulus of the compacts were comparable to those achieved in composites that were synthesized using more conventional techniques. Dynamic compaction offers an alternative method for the fabrication of zirconia-toughened alumina ceramics.     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

Polymers for medical and tissue engineering applications

Recent decades have seen great advancements in medical research into materials, both natural and synthetic, that facilitate the repair and regeneration of compromised tissues through the delivery and support of cells and/or biomolecules. Biocompatible polymeric materials have become the most heavily investigated materials used for such purposes. Naturally‐occurring and synthetic polymers, including their various composites and blends, have been successful in a range of medical applications, proving to be particularly suitable for tissue engineering (TE) approaches. The increasing advances in polymeric biomaterial research combined with the developments in manufacturing techniques have expanded capabilities in tissue engineering and other medical applications of these materials. This review will present an overview of the major classes of polymeric biomaterials, highlight their key properties, advantages, limitations and discuss their applications. © 2014 Society of Chemical Industry