Effect of Dipping Temperature and Dipping Time on Drying Rate and Color Change of Grapes

Thompson seedless grapes (Vitis vinifera) were pretreated in potassium carbonate and ethyl oleate solutions for 1, 2, and 3 min at 30, 40, 50, and 60°C and dried in a convective air dryer at 60°C. The effect of dipping time and solution temperature on drying rate and color kinetics were investigated. Grapes dipped into the solution at 60°C for 2 and 3 min had the fastest drying rate. Among the seven semi theoretical models compared, the Midilli equation best described the drying curves of grapes for all dipping pretreatments. Color data were obtained using a machine vision system in CIE L*a*b* color space. Regardless of the dipping time and temperature applied, all raisins had varying degrees of brown coloring. At all dipping times and temperatures the highest R ² value was obtained for a* values, which followed zero-order reaction kinetics during drying.     

rGO/CuO/PEDOT nanocomposite formation,its characterisation and electrochemical performances for supercapacitors

ABSTRACT

Supercapacitor properties of rGO, CuO, PEDOT and rGO/CuO at [rGO]_o/[CuO]_o?=?1:1; 1:1.5; 1:2 and rGO/CuO/PEDOT nanocomposite at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:1; 1:1:3; 1:1:5 were investigated using chemical reduction of GO and in-situ polymerisation process. SEM-EDX, HRTEM, BET surface area analysis confirm the nanocomposite formations. Nanocomposite materials are also analysed through FTIR-ATR, Raman, TGA-DTA, GCD, CV and EIS. The highest specific capacitance of C _sp?=?156.7 F/g at 2?mV/s is determined as rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5. In addition, two-electrode supercapacitor device for rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5 are found to provide a maximum specific energy (E?=?14.15 Wh/kg at 20?mA) and specific power (P?=?24730 W/kg at 50?mA), electrical serial resistance (ESR?=?13.33 Ω) with good capacity retention after 3000 cycles. An equivalent circuit model of LR1(CR2)(QR3) is proposed to interpret the EIS data. The supercapacitor performance of the rGO/CuO/PEDOT nanocomposite electrode indicates the synergistic effect of hybrid supercapacitors.     

The Impacts of Heat Treatment on Lap Joint Shear Strength of Black Pine Wood

This study was conducted to determine the impacts of heat treatment on lap shear strength, density, and mass loss of black pine wood. In the study, black pine wood boards bonded with polyurethane were subjected to temperatures of 160, 180, and 200°C for durations of 2 and 6 hours. Specimens having two layers were prepared from untreated and treated wood for mechanical testing of bond lines. Data were analyzed using variance analysis and Tukey's test to determine the impacts of changes in density and mass of heat-treated black pine wood on lap shear strength. The results indicated that the lap shear strength of black pine wood decreased as the intensity of heat treatment increased. The results also indicated that the minimum and maximum percentage decreases of lap shear strength were approximately 27% for 160°C and 2 hours and 78% for 200°C and 6 hours.     

Effect of protrusion at the ends of bondline in single lap joints under tension and bending

In this work, elasto-plastic stress analysis of single lap joints with and without protrusion in adhesive bondline subjected to tension and bending was carried out using 2D non-linear finite element analysis and confirmed experimentally. AA 2024-T3 aluminum adherends were bonded with SBT 9244 film adhesive. The protrusion was obtained by extending the adhesive film by 2?mm from the overlap length at both overlap ends. Three different adherend thicknesses and overlap lengths for each loading and bondline type were used. The joints with and without protrusion, for comparison, were loaded with the same load for each adherend thickness and overlap length. Finally, it was observed that the protrusion reduces the strength in the joint under tension, while the protrusion increases the strength in the joint under bending.     

Characterization of tributyrin hydrolysis by immobilized lipase on woolen cloth using conventional batch and novel spinning cloth disc reactors

Optimal loading and operating conditions for a new, superior immobilization of amano lipase from Pseudomonas fluorescens on woolen cloth were determined. The optimal enzyme loading was 46.8 mg g dry cloth⁻¹ with activity of 200 U. A batch reactor was used to characterize process conditions important to industrial application of the wool immobilized lipase. The optimal pH for immobilized lipase in tributyrin hydrolysis was 7, slightly lower than that of free lipase (pH 8). The optimal temperature for both free and immobilized lipase was 45 °C. The immobilized lipase was more stable to reuse than some other lipase immobilizations, maintaining 85% of its activity after 6 long term runs and 75.8% of the original activity after storage of 40 weeks at 4 °C. The thermal stability of lipase was improved by 2.4 times after immobilization. The thermal deactivation rate of immobilized lipase followed the Arrhenius law with E_d = 199 kJ mol⁻¹. The Michaelis–Menten constant (K_m) of the lipase increased from 1.63 mM to 4.48 mM after immobilization. The immobilized lipase was also successfully applied for tributyrin hydrolysis in a novel enzyme process intensification technology – the spinning cloth disc reactor (SCDR): conversion increased by around 13% under similar conditions compared to a conventional batch stirred tank reactor. The SCDR is therefore key to exploiting the advantages of the wool immobilized lipase developed in this work.     

Plasma polymerization‐modified bacterial polyhydroxybutyrate nanofibrillar scaffolds

The design and the development of novel scaffold materials for tissue engineering have attracted much interest in recent years. Especially, the prepared nanofibrillar scaffold materials from biocompatible and biodegradable polymers by electrospinning are promising materials to be used in biomedical applications. In this study, we propose to produce low‐cost and cell‐friendly bacterial electrospun PHB polymeric scaffolds by using Alcaligenes eutrophus DSM 545 strain to PHB production. The produced PHB was characterized by Nuclear Magnetic Resonance (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). Nanofibrous scaffolds were fabricated via electrospinning method that has a fiber diameter approximately 700–800 nm. To investigate cell attachment, cell growth, and antioxidant enzyme activity on positively and negatively charged PHB scaffold, PHB surface was modified by plasma polymerization technique using polyethylene glycol (PEG) and ethylenediamine (EDA). According to the results of superoxide dismutase (SOD) activity study, PEG‐modified nanofibrillar scaffolds indicated more cellular resistance against oxidative stress compared to the EDA modification. As can be seen in cell proliferation results, EDA modification enhanced the cell proliferation more than PEG modification, while PEG modification is better as compared with nonmodified scaffolds. In general, through plasma polymerization technique, surface modified nanofibrillar structures are effective substrates for cell attachment and outgrowth. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Efficient Modular Synthesis of Isomeric Mono‐ and Bispyridyl[2.2]paracyclophanes by Palladium‐Catalyzed Cross‐ Coupling Reactions

Pyridyl‐substituted [2.2]paracyclophanes build a multifunctional structural motif that is useful in material chemistry, catalysis and for luminescent structures. Nonetheless, there is still a lack of general methods for the synthesis of these structures tolerating easily accessible bromides as well as different isomeric pyridyl groups. Hence the coupling of functionalized [2.2]paracyclophanes with various substituted and functionalized pyridyl derivatives was achieved using Stille, Suzuki and Kumada coupling conditions. Hereby the Stille coupling of a [2.2]paracyclophane is presented as a versatile reaction for the formation of heteromeric [2.2]paracyclophane‐containing biaryl structures.

     

Electrochemical corrosion properties of metal alloys used in orthopaedic implants

This study concerns an investigation of the corrosion behavior of 316 stainless steel, CoCrMo and Ti6Al4V alloys in simulated body conditions (ringer lactate) at 37 °C by the use of Tafel plots, mixed potential and electrochemical impedance spectroscopy (EIS). Ti6Al4V alloy has the highest corrosion resistance followed by CoCr alloy. Ti6Al4V–CoCrMO was the best couple for galvanic corrosion with the minimum galvanic potential and current values according to mixed potential theory and Tafel method. It was concluded that Ti6Al4V was the most suitable material for implant applications in the human body.     

The effect of borax pentahydrate addition to urea formaldehyde on the mechanical characteristics and free formaldehyde content of plywood

In this study, the effects of borax pentahydrate addition to urea formaldehyde (UF) on the bonding characteristics and free formaldehyde content have been studied. Experiments related to the bending strength, withdrawal shear strength and free formaldehyde content have been conducted on the three-layered beech and poplar plywood which are prepared by the addition of borax pentahydrate into their adhesive mixtures in certain amounts. Addition of borax pentahydrate into the adhesive mixture did not statistically affect the bending strength and withdrawal shear strength of the plywood but did reduce the free formaldehyde content.     

RAFT-mediated polymerization and grafting of sodium 4-styrenesulfonate from cellulose initiated via γ-radiation

Ambient temperature (20 °C) reversible addition fragmentation chain transfer (RAFT) polymerization of sodium 4-styrenesulfonate (SS) conducted directly in aqueous media under γ-irradiation at different dose rates (0.09, 0.03 and 0.02 kGy h⁻¹) proceeds in a controlled fashion (typically, M_w/M_n < 1.25) to near quantitative conversions via 4-cyanopentanoic acid dithiobenzoate (CPADB) mediation. By applying CPADB modified cellulose as a macro chain transfer agent, a graft copolymer with SS was prepared in aqueous media under γ-irradiation. RAFT mediated graft polymerizations provided copolymers with higher graft frequencies compared to those obtained by conventional methods. Thermally initiated grafting of SS from a CPADB-functionalized cellulose surface at 70 °C was also studied which resulted in a reduced graft frequency in comparison to γ-initiated ones.