Digital image correlation analysis and modelling of the strain rate in metal cutting

In the last eight decades, considerable modelling and computational efforts have been made to predict the strain rate during cutting with the aim of optimizing machining processes. However, the validation of these modelling approaches on a local scale remains excessively limited due to the lack of in-situ measurements and the faulty existing quick-stop tests. This work presents the in-process analysis of the strain rate and strain in the primary shear zone using high speed Digital Image Correlation (DIC) techniques. The comparison of measured and computed results shows the suitability of the DIC techniques and the robustness of the modelling approaches.     

Relationship between structure and rheological,mechanical and thermal properties of polylactide/Cloisite 30B nanocomposites

Melt‐state and solid state mechanical properties and thermal stability of polylactide layered silicate nanocomposites elaborated by melt intercalation were studied as a function of clay content. Wide angle X‐ray scattering results, transmission electron microscopy observations, and rheological measurements indicated that the clay was finely distributed in the polylactide matrix. Contrary to nonlinear mechanical properties, thermal and linear mechanical properties were shown to increase with increasing clay fraction. The nanoindentation measurements confirm the significant increase of linear mechanical properties previously observed by tensile tests. The good correlation of linear mechanical properties at the macrometric and nanometric scales is explained by the high dispersion degree of the nanofiller in the biodegradable polymer matrix. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Grid automata and supervisory control of dense real-time discrete event systems

We present a generalization of the classical supervisory control theory for discrete event systems to a setting of dense real-time systems modeled by Alur and Dill timed automata. The main problem involved is that in general the state space of a timed automaton is (uncountably) infinite. The solution is to reduce the dense time transition system to an appropriate finite discrete subautomaton, the grid automaton, which contains enough information to deal with the timed supervisory control problem (TSCP). The plant and the specifications region graphs are sampled for a granularity defined in a way that each state has an outgoing transition labeled with the same time amount. We redefine the controllability concept in the context of grid automata, and we provide necessary and sufficient solvability conditions under which the optimal solution to centralized supervisory control problems in timed discrete event systems under full observation can be obtained. The enhanced setting admits subsystem composition and the concept of forcible event. A simple example illustrates how the new method can be used to solve the TSCP.     

Frequency dispersion of electro-optical properties over a wide range by means of time-response analysis

We show that a Z-transform-based time-response analysis of the electro-optical response of a crystal to a step voltage with a short rise time allows one to obtain the dispersion of the electro-optical coefficients over a wide frequency range. We describe the method employed and present the results obtained for the main electroptic coefficients (r22, r61, and rc) of a standard LiNbO3 crystal. We also show that this method is able to provide even small values of the electro-optic coefficient as well as the dispersion within a wide frequency range, which is limited only by the rise time of the step voltage.     

Using bottom surface reflectance to map coastal marine areas: a new application method for Lyzenga's model

Remote sensing is widely used in coastal management. Lyzenga's model has been traditionally used to explain the relationship between bottom surface reflectance and the radiance level measured by satellite. Due to its central assumption, this model lacks accuracy compared with the other radiative transfer models. Nonetheless, it enables, with a single and simple equation, representation of the multiple optical processes taking place in coastal areas. Mapping processes associated with this model may include radiometric correction, a technique previously pointed out as a major driver of mapping accuracy. Radiometric correction is generally based on a depth-invariant index, efficient for clear waters (Jerlov water type I to II) but largely unsuitable when transparency decreases (Jerlov water type II to III). In order to overcome this problem, we developed a new index for radiometric correction, which combines bathymetry data with attenuation coefficients. The improved efficiency of our model with regard to the traditional depth invariant index was demonstrated through two case studies: Funakoshi Bay (Japan; Jerlov water type II) and the Gabes Gulf part located off Mahares (Tunisia; Jerlov water type II to III).     

Virtual-water content of agricultural production and food trade balance of Tunisia

This article is devoted to the assessment of Tunisian agricultural production and food trade balance water-equivalent. A linear regression model relating annual rainfall to crop yields is developed to estimate the agricultural production water-equivalent. Its implementation is based on national data for crop and animal production, leading to food demand water-equivalent quantification. Results highlight the relationship between agricultural and water policies and provide a picture of food security in the country in relation to local agricultural production, and to virtual water fluxes related to foodstuffs trade balance.     

Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method

This paper reported on the work performed to study the formation of silicon nitride and silicon carbide whiskers using the carbothermal nitridation process. A distinctive aspect of the present study lies in the use of the mechanical milling method to alter the regularity of the crystalline network of the silica sand. In order to optimise the processing parameters for the synthesis of silicon carbide, the concept of Taguchi's Design of Experiments was considered, the analysis being based on Taguchi's signal to noise ratio and variance techniques to obtain optimum combination of process parameters. Important factors influencing the formation of silicon carbide were the duration of the mechanical milling, followed by temperature, time and heating rate.     

A degradation study of polyamide 11/vermiculite nanocomposites under accelerated UV test

Accelerated photooxidation under ultraviolet (UV) test of polyamide 11 (PA11) films filled with unmodified vermiculite clay at 5 wt% was investigated up to 600 h. Film samples of ~60‐μm thick were prepared by melt compounding using a cast extruder and exposed to UV light irradiation at λ > 295 nm. Fourier transform infrared (FTIR) spectra indicated similar structural changes occurring in both PA11 and PA11/unmodified vermiculite nanoclay (UVMC) nanocomposite along the photooxidation process, resulting in imides and carboxylic acids as the main carbonyl products. It was however observed that the formation rate of carbonyls in the PA11/UVMC nanocomposite was slower than neat PA11. This behavior is consistent with the yellowing index evolution determined by ultraviolet–visible (UV–vis) spectroscopy. Further, the photooxidation stability of the samples was also evaluated by the onset oxidation temperature determined by differential scanning calorimetry. The results indicated a better stability of the nanocomposite film than neat PA11, corroborating well the data obtained by FTIR and UV–vis techniques. POLYM. ENG. SCI., 59:2449–2457, 2019. © 2019 Society of Plastics Engineers