All solid-state battery with sulfur electrode and thio-LISICON electrolyte

A high-capacity type of all solid-state battery was developed using sulfur electrode and the thio-LISICON electrolyte. New nano-composite of sulfur and acetylene black (AB) with an average particle size of 1–10 nm was fabricated by gas-phase mixing and showed a reversible capacity of 900 mAh g⁻¹ at a current density of 0.013 mA cm⁻².     

A 128-kb FeRAM macro for contact/contactless smart-card microcontrollers

This paper describes a 128-kb FeRAM macro for smart-card microcontrollers. This macro, which was designed and fabricated using a 0.35-/spl mu/m three-metal CMOS and a Capacitor-on-Metal/Via-stacked-Plug (CMVP) process technology, is ideally suited for recent system LSIs such as smart-card microcontrollers. It has a flexible memory size ranging from 32 to 128 kb, a low consumption current of 0.3 mA, and endurance of more than 10/sup 8/ write/read cycles under a wide range of supply voltages, from 2.7 to 5.5 V. These characteristics, which are required of not only contact-type smart-card microcontrollers but also contactless-type ones, were achieved by using four newly developed circuit technologies: 1) a three-metal CMVP memory cell; 2) a voltage-regulating architecture; 3) a main/sub bitline and wordline structure; and 4) a dynamic-type offset sense amplifier.     

Phase and amplitude comparison between experiment and calculation of ultrabroad-band pulses generated in a taper fiber

Using a cross-correlation frequency-resolved optical gating apparatus, the phases and amplitudes of ultrabroad-band optical pulses from a taper fiber have been measured for various input pulse peak powers. The measured waveforms have been compared with calculated waveforms using a finite-difference in the frequency domain method, in which no envelope approximations were used and the variation of the taper shape was taken into account. Excellent agreement between the measured and the calculated waveforms was obtained when the additional dispersion of a normal fiber and an objective was considered.     

Localization via ultra-wideband radios: a look at positioning aspects for future sensor networks

UWB technology provides an excellent means for wireless positioning due to its high resolution capability in the time domain. Its ability to resolve multipath components makes it possible to obtain accurate location estimates without the need for complex estimation algorithms. In this article, theoretical limits for TOA estimation and TOA-based location estimation for UWB systems have been considered. Due to the complexity of the optimal schemes, suboptimal but practical alternatives have been emphasized. Performance limits for hybrid TOA/SS and TDOA/SS schemes have also been considered. Although the fundamental mechanisms for localization, including AOA-, TOA-, TDOA-, and SS-based methods, apply to all radio air interface, some positioning techniques are favored by UWB-based systems using ultrawide bandwidths.     

A comparative study of DPSK and OOK WDM transmission over transoceanic distances and their performance degradations due to nonlinear phase noise

We have compared experimentally the transmission performance of return-to-zero differential phase-shift keying (RZ-DPSK) with RZ-ON-OFF keying (OOK), nonreturn-to-zero differential phase-shift keying (NRZ-DPSK), and NRZ-OOK for 100/spl times/10-Gb/s transmission with a spectral efficiency of 0.22 b/s/Hz over transoceanic distances. The Q degradation of the RZ-DPSK after transmission over 9180 km was 3 dB greater than that of RZ-OOK. The experimental results clearly showed the major cause of degradation for DPSK is not cross-phase modulation but self-phase modulation. The calculated nonlinear phase noise, i.e., the Gordon-Mollenauer effect, agreed with the experimental results. A distributed-Raman-amplifier assisted erbium-doped-fiber-amplified transmission line acted well in reducing the nonlinear phase noise.     

DNA Computing Boosted by a Cationic Copolymer

The huge information storage capability of DNA and its ability to self‐assemble can be harnessed to enable massively parallel computing in a small space. DNA‐based logic gates are designed that rely on DNA strand displacement reactions; however, computation is slow due to time‐consuming DNA reassembly processes and prone to failure as DNA is susceptible to degradation by nucleases and under certain solution conditions. Here, it is shown that the presence of a cationic copolymer boosts the speed of DNA logic gate operations that involve multiple and parallel strand displacement reactions. Two kinds of DNA molecular operations, one based on a translator gate and one on a seesaw gate, are successfully enhanced by the copolymer without tuning of computing conditions or DNA sequences. The copolymer markedly reduces operation times from hours to minutes. Moreover, the copolymer enhances nuclease resistance.     

Strong Surface‐Termination Effect on Electroresistance in Ferroelectric Tunnel Junctions

Tunnel electroresistance in ferroelectric tunnel junctions (FTJs) has attracted considerable interest, because of a promising application to nonvolatile memories. Development of ferroelectric thin‐film devices requires atomic‐scale band‐structure engineering based on depolarization‐field effects at interfaces. By using FTJs consisting of ultrathin layers of the prototypical ferroelectric BaTiO₃, it is demonstrated that the surface termination of the ferroelectric in contact with a simple‐metal electrode critically affects properties of electroresistance. BaTiO₃ barrier‐layers with TiO₂ or BaO terminations show opposing relationships between the polarization direction and the resistance state. The resistance‐switching ratio in the junctions can be remarkably enhanced up to 10⁵% at room temperature, by artificially controlling the fraction of BaO termination. These results are explained in terms of the termination dependence of the depolarization field that is generated by a dead layer and imperfect charge screening. The findings on the mechanism of tunnel electroresistance should lead to performance improvements in the devices based on nanoscale ferroelectrics.     

Formation of a step-free InAs quantum well selectively grown on a GaAs (111)B substrate

We investigated the possibility of forming a step-free quantum well structure. A step-free InAs monolayer was grown on a selectively grown mesa by controlling surface phases with in-situ monitoring of surface photo-absorption. We selectively grew a GaAs buffer at 800°C and cooled the sample keeping the (2×2)-like As stabilized surface. Atomic force microscopy (AFM) observation demonstrated that fully step-free surfaces were formed on the 8 μm wide mesa. Then, a monolayer-thick InAs was formed on this step-free surface and this InAs layer was capped by GaAs under the (2×2)-like condition. The quantum level of the step-free InAs layer was evaluated by spatially resolved photoluminescence (μPL) measurement. Uniform PL intensity and the lack of a double layer peak indicated the formation of a step-free InAs quantum well, which was in good agreement with AFM observation.     

A high-speed, low-power bipolar digital circuit for Gb/s LSI's:current mirror control logic

A novel low-power bipolar circuit for Gb/s LSIs, current mirror control logic (CMCL), is described. To reduce supply voltage and currents, the current sources of emitter-coupled-logic (ECL) series gate circuits are removed and the lower differential pairs are controlled by current mirror circuits. This enables circuits with the same function as two-stacked ECL circuits to operate at supply voltage of -2.0 V and reduces the current drawn through the driving circuits for the differential pairs to 50% of the conventional level shift circuits (emitter followers) in ECL. This CMCL circuit achieves 3.1-Gb/s (D-FF) and 4.3-GHz (T-FF) operation with a power supply voltage of -2.0 V and power dissipation of only 1.8 mW/(FF)     

All-active monolithic InP-based HBT VCO with tunable HEMT inductor

A novel HEMT-HBT VCO is presented; it is the first all-active analogue VCO demonstrated using InP HEMT-HBT integrated MMIC technology. The MMIC monolithically integrates an InP common-collector HBT oscillator with a tunable InP HEMT active inductor using selective MBE. The novel HEMT-HBT VCO can provide performance advantages over analogue VCOs such as the multi-vibrator, and has direct implications for high speed clock recovery circuits needed in InP based optoelectronic IC applications