The IEEE P1520 standards initiative for programmable networkinterfaces

This article discusses the need for standard software interfaces for programming of networks, specifically for service and signaling control, through programming interfaces. The objective is to enable the development of open signaling, control, and management applications as well as higher-level multimedia services on networks. The scope of this effort includes ATM switches, circuit switches, IP routers, and hybrid switches such as those that provide for fast switching of IP packets over an ATM backbone. The basic ideas represented herein are in the process of development as a standard for application programming interfaces for networks under IEEE Standards Project IEEE P1520     

A single-chip storage LSI for home networks

Network direct attached storage (NDAS) is a network storage architecture that allows direct attachment of existing ATA/ATAPI devices to Ethernet without a separate server. Unlike other architectures such as NAS, SAN, and USB mass storage, no server computer intervenes between the storage and the client hosts. We describe an NDAS disk controller (NDC) amenable to low-cost single-chip implementation that processes a simplified L3/L4 protocol and converts commands between ATA/ATAPI and Ethernet, while the remaining complex tasks are performed by remote hosts. Unlike NAS architectures that use TCP/IP, NDAS uses a TCP-like lean protocol that lends itself well to high-performance hardware realization. Thanks to the simple NDAS architecture and protocol, an NDC implemented on a single 4 mm /spl times/ 4 mm chip in 0.18 /spl mu/m CMOS technology achieves a maximum throughput of 55 Mbytes/s on gigabit Ethernet, which is comparable to that of a high-performance disk locally attached to a host computer.     

Metamaterial-based electronically controlled transmission-line structure as a novel leaky-wave antenna with tunable radiation angle and beamwidth

A metamaterial-based electronically controlled transmission-line structure is presented and demonstrated as a novel leaky-wave (LW) antenna with tunable radiation angle and beamwidth functionalities. This structure is, in essence, a composite right/left-handed (CRLH) microstrip structure incorporating varactor diodes for fixed-frequency voltage-controlled operation. Angle scanning at a fixed frequency is achieved by modulating the capacitances of the structure by adjusting the (uniform) bias voltage applied to the varactors. Beamwidth tuning is obtained by making the structure nonuniform by application of a nonuniform bias voltage distribution of the varactors. A rigorous analysis based on an extension of the CRLH concept is proposed and the corresponding dispersion curves, obtained by equivalent-circuit formulas with LC parameters extracted from full-wave simulation, are shown. A 30-cell LW antenna structure, incorporating both series and shunt varactors for optimal impedance matching and maximal tuning range, is designed. This prototype exhibits continuous scanning capability from 50/spl deg/ to -49/spl deg/ by tuning the bias voltages from 0 to 21 V at 3.33 GHz. A maximum gain of 18 dBi at broadside is also achieved. In addition, it provides half-power beamwidth variation of up to 200% with comparison to the case of uniform biasing. The effect of intermodulation due to the nonlinearity of the varactors is shown to be negligible for antenna applications. The antenna is tested in a 10-Mb/s binary phase-shift keying transmission link and successful recovery of the baseband data is demonstrated.     

A compact-size microstrip spiral resonator and its application to microwave oscillator

This letter presents a compact size microstrip spiral resonator and its application to a low phase noise oscillator. This resonator has stopband characteristics to be used in the series feedback oscillator topology. The whole circuit area of the proposed resonator is within 1/10 wavelength, which results in the reduction of the circuit area and cost. A 10-GHz oscillator incorporated with this resonator was designed, fabricated and measured. It shows low phase noise performance of -95.4-dBc/Hz at 100 kHz offset.     

Turbo multiuser detection for differentially modulated CDMA

In this letter, we study differentially modulated, iteratively decoded CDMA. The iterative multiuser receiver proposed consists of an additional soft-input soft-output (SISO) differential decoder, when compared to turbo multiuser detectors for absolutely modulated systems. Algorithms for iterative decoding with and without phase information at the receiver are developed. The resulting turbo receivers with differential modulation outperform coherent receivers with absolute modulation at moderate to high signal to noise ratios due to the interleaver gain associated with recursive inner encoders in serially concatenated encoding structures.     

Adaptive Kernel Function of SVM for Improving Speech/Music Classification of 3GPP2 SMV

Because a wide variety of multimedia services are provided through personal wireless communication devices, the demand for efficient bandwidth utilization becomes stronger. This demand naturally results in the introduction of the variable bitrate speech coding concept. One exemplary work is the selectable mode vocoder (SMV) that supports speech/music classification. However, because it has severe limitations in its classification performance, a couple of works to improve speech/music classification by introducing support vector machines (SVMs) have been proposed. While these approaches significantly improved classification accuracy, they did not consider correlations commonly found in speech and music frames. In this paper, we propose a novel and orthogonal approach to improve the speech/music classification of SMV codec by adaptively tuning SVMs based on interframe correlations. According to the experimental results, the proposed algorithm yields improved results in classifying speech and music within the SMV framework.     

Numerical Optimization of an Active Voltage Controller for High-Power IGBT Converters

Feedback control of insulated gate bipolar transistors (IGBTs) in the active region can be used to regulate the device switching trajectory. This facilitates series connection of devices without the use of external snubber networks. Control must be achieved across the full active region of the IGBT and must balance a number of conflicting system goals including diode recovery. To date, the choice of control parameters has been a largely empirical process. This paper uses accurate device models and formalized optimization procedures to evaluate IGBT active voltage controllers. A detailed optimization for the control of IGBT turn-on is presented in this paper     

Trend change in mean residual life

The authors consider a life distribution which shows a trend change in its mean residual life (MRL). The problem of testing such a trend change has been of great interest in reliability analysis. The authors propose a new procedure for testing the exponentiality against IDMRL or DMIRL, assuming that the proportion of the population, p, that dies at or before the change point of MRL is known. Their test provides a new competitor to the known test procedures, such as the Guess, Hollander, Proschan test and the Aly test. Based on the empirical powers of these tests against lognormal alternatives, their test outperforms the others for most sample sizes and most values of p and that all three tests achieve high power in detecting the trend change of MRL when p is very small and very large     

Bendable and Splitter-Integrated Optical Subassembly Based on a Flexible Optical Board

A bendable and splitter-integrated optical subassembly (OSA) is suggested as a short-distance board-to-board optical interconnection. This OSA was fabricated by simply packaging a vertical-cavity surface-emitting laser on a flexible optical board having an embedded 1 $times$ 8 optical splitter waveguide. Finally, we measured various optical characteristics of the OSA, including insertion, twist, and bending losses.      

Charge pump with perfect current matching characteristics inphase-locked loops

Conventional CMOS charge pump circuits have some current mismatching characteristics. The current mismatch of the charge pump in the PLLs generates a phase offset, which increases spurs in the PLL output signals. In particular, it reduces the locking range in wide range PLLs with a dual loop scheme. A new charge pump circuit with perfect current matching characteristics is proposed. By using an error amplifier and reference current sources, one can achieve a charge pump with good current matching characteristics. It shows nearly perfect current matching characteristics over the whole VCO input range, and the amount of the reference spur is <-75 dBc in the PLL output signal. The charge pump circuit is implemented in a 0.25 μm CMOS process